







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Refacing Really Costs in Hialeah, FL - and Why the National Numbers Don’t Apply
Cabinet refacing in Hialeah runs $4,200-$9,800 for an average kitchen, not the $1,500-$4,000 figure that ranks everywhere online. The reason is structural: most of this city’s postwar homes have out-of-plumb concrete-block walls that torqued the original cabinet boxes out of square decades ago, and straightening those boxes before new doors go on is a line item some shops bill separately and others bury. A written, line-item price is the only number worth comparing. Call Rowan Construction Group Hialeah at (888) 836-5914 for a free estimate with every item broken out.
For a full kitchen remodel that folds refacing into a larger scope, our range in Hialeah is $14,000-$45,000 - cabinetry work sits inside that as one line, not a mystery bundle.

Why Hialeah Cabinet Quotes Come In Higher Than the Ballpark Numbers
Concrete block and CBS construction - the standard here from the 1950s through the 1970s - behaves differently from wood-framed walls. Block transfers moisture and micro-movement into anything fastened to it. Over 50 or 60 years, that movement racks cabinet boxes: corners pull out of square, shelves bow, and the face frame twists. A crew that slaps veneer onto a racked box gets doors that won’t close flush in two years.
So the first step on any Hialeah refacing job is inspection, not installation. We check plumb on the wall run, square on each box, and whether the existing face frames are sound enough to carry new facing material. In Hialeah’s older single-family homes and small duplexes, that inspection regularly turns up two or three boxes that need shimming, sistering, or partial rebuild before any material goes on.
None of that shows up in a phone-quoted ballpark. It shows up in a written line-item price, which is what we deliver before anyone picks up a tool.
The Three Line Items Your Refacing Quote Must Separate
When you compare refacing quotes on a Kitchen Remodeling project, insist each quote breaks out the same three categories. Otherwise you’re comparing a bare-bones number against a complete one and calling it a bargain.
1. Box repair and shimming: often $400-$1,200 in Hialeah homes
This covers straightening out-of-square boxes, replacing damaged shelf pins and corner braces, adding blocking where the wall won’t hold a fastener, and sealing the substrate before facing goes on. In a Hialeah home that’s never had its cabinets touched, this figure trends toward the top of that range. In a home where the boxes were replaced within the last 15 years, it can drop near zero. Ask for the box condition in writing.
2. Facing material: veneer or rigid thermofoil
This is the visible skin - doors, drawer fronts, and the veneer or rigid thermofoil panel that covers the existing box. We source door blanks from Wellborn and KraftMaid, both of which publish current door-style and finish pricing we can build into a written quote rather than guessing at. Material cost swings widely by door style, finish, and whether you choose a flat slab or a raised-panel profile. Expect material to make up roughly 40 to 55 percent of a refacing total.
3. Installation labor
Labor covers removal of old doors and hardware, surface prep, applying the facing, hanging new doors, installing drawer fronts, and fitting hardware. It also covers the sealer coat on the substrate - see the humidity note below for why that matters.

Why Miami-Dade Humidity Makes Substrate Prep a Cost Item, Not an Upsell
Hialeah sits in a subtropical climate with high indoor humidity most of the year, and that humidity attacks any cabinet box that isn’t properly sealed. Veneer delaminates from the inside out when the substrate beneath it takes on moisture - the facing bubbles and lifts at the edges, usually within a season or two. A sealer coat on the box before new facing goes on is the cheap insurance against that.
Budget roughly $150-$400 for substrate sealing on an average kitchen. It’s a real line in the written quote, not a surprise added later. The same humidity logic drives the inspection step above: a box with a soft spot or a water stain needs to be addressed before it gets covered over.
Reface or Replace? A Simple Crossover Rule
Refacing keeps your existing boxes and replaces the visible skin. Replacement pulls the boxes out and installs new ones. Refacing nearly always costs less up front, but there’s a point past which it stops making sense.
The rule: when box repair and substrate prep together exceed roughly 30 percent of the total refacing quote, full replacement with KraftMaid semi-custom cabinets typically pencils out within $500-$1,500 more and delivers a full manufacturer warranty on the boxes themselves. At that point, replacement is the better purchase. Below that threshold, refacing remains the value choice.
We’ll tell you which side of that line you’re on, in writing, before you commit either way.
Line-Item Price Ranges for Cabinet Work in Hialeah
These are the numbers we build written quotes from. A refacing job pulls from the first three rows; a full replacement pulls from cabinet installation plus countertop and backsplash if you’re changing those too.
| Item | Typical Range in Hialeah |
|---|---|
| Cabinet refacing (average kitchen) | $4,200-$9,800 |
| Box repair and shimming | $400-$1,200 |
| Substrate sealing and prep | $150-$400 |
| Cabinet installation (new boxes) | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
| Full kitchen remodel (refacing inside a larger scope) | $14,000-$45,000 |
| Small kitchen remodel | $9,000-$20,000 |
What the Written Price Covers, and What Happens If the Scope Changes
Every Rowan Construction Group Hialeah quote is a flat written price with a written scope and a written warranty, delivered before work starts. No “call for a quote” - the number is on paper.
If inspection turns up a box that needs more than shimming, or you decide mid-project to add a door or switch hardware brands, no work proceeds on that change until a change order is signed. That’s the discipline that keeps the final number within a few percent of the agreed price. It’s also why a written quote with box repair separated out is worth more than a phone ballpark that hides it.
Every visit includes a documented photo record - what we found, what we did - as a standard deliverable. Crews are background-checked and uniformed, technicians have up to 19 years of experience, calls are answered by a live person 24/7, and the 365-Day Done Right Promise means if it’s not done right, we make it right.
Want to compare before you commit? Bring a competitor’s written estimate and we’ll review it line by line at no charge through our Free Second Opinion offer. For the broader scope of the trade, see Kitchen Remodeling in Hialeah.
FAQs
Cabinet refacing in Hialeah typically runs $4,200-$9,800 for an average kitchen, with box repair adding $400-$1,200 when the original concrete-block-era boxes need straightening. That’s higher than the national $1,500-$4,000 figure because out-of-square boxes here are the rule, not the exception. Call (888) 836-5914 for a free written estimate - every line item broken out.
It’s the housing stock and the climate. Hialeah’s 1950s-1970s CBS homes have concrete-block walls that transfer moisture and movement into the cabinet boxes, so a large share of jobs need the boxes straightened and sealed before facing goes on. That prep is a real cost item, and a written quote that separates it is the only way to compare two bids fairly. Call (888) 836-5914 to see how it breaks out for your kitchen.
Refacing is cheaper unless box repair exceeds about 30 percent of the refacing total. Past that point, full replacement with KraftMaid semi-custom cabinets usually pencils out within $500-$1,500 more and includes a full manufacturer warranty on the boxes. We’ll give you both numbers in writing so the comparison is on paper, not in your head. Call (888) 836-5914 for the comparison.
Most refacing jobs finish in two to four days once materials arrive, with box repair and substrate prep adding a day or so on homes where the original boxes need straightening. Door and finish lead times vary by style. Call (888) 836-5914 and we’ll put a written timeline on the quote alongside the price.
Get the Number in Writing Before Anyone Picks Up a Tool
Call (888) 836-5914 for a free written estimate on refacing your Hialeah kitchen. We’ll inspect the boxes, separate every line item - repair, material, labor, sealer - and give you a flat price with a two-way comparison against replacement. No ballpark guesses, no change orders without a signature. Licensed, insured, upfront pricing every time.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah, FL.
What Our Customers Say
"Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T.












