







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Hialeah?
Walk-in shower installation in Hialeah typically costs $4,500 to $12,000 in 2026, with most homeowners landing between $6,800 and $9,200 for a standard 48-inch curbless or low-curb shower in a Hialeah home built between 1965 and 1995. A simple curb-and-tile replacement with a prefab pan runs closer to the low end, while a fully tiled wet-room with frameless glass, a linear drain, and a custom niche sits at the top of the range. The cost swing comes down to three things: whether the existing floor has to come up to meet the 1/4-inch-per-foot slope Florida code requires, what the plumbing behind the wall looks like once we open it, and how much glass you want.
We put written numbers on every estimate before anyone touches a demo hammer. That’s Clause 1 of The Haven Standard, and it applies whether you’re replacing a single shower or working through a full home bathroom refresh at the same time. Bring a competitor’s quote and we’ll review it line by line at no charge.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s what each component costs in the Hialeah market right now. These are real ranges based on what we’re seeing in jobs from Palm Springs to Country Club Park, not national averages copied off a widget site.
| Line Item | Typical Range | What’s Included |
|---|---|---|
| Demo and haul-away | $350 – $800 | Remove existing tub or shower, tile, backer board, dispose of debris |
| Rough plumbing and drain relocation | $600 – $2,200 | Move or replace valve, reposition drain for linear or center design |
| Waterproofing (membrane, pan liner, flood test) | $450 – $1,100 | Schluter Kerdi or RedGard system, pre-slope, 24-hour flood test |
| Backer board and substrate | $300 – $700 | Cement board, joint treatment, curb framing |
| Tile and setting materials | $1,200 – $4,500 | Porcelain, ceramic, or porcelain mosaic; thinset, grout, sealant |
| Prefab shower pan and walls | $900 – $2,800 | Acrylic or cultured marble unit, Kohler or Sterling, curb included |
| Frameless or semi-frameless glass | $900 – $2,600 | Tempered glass, hardware, professional measurement and install |
| Shower valve, trim, and fixtures | $450 – $1,500 | Kohler or Moen valve, rain head, handheld, niche fixtures |
| Niche, bench, or linear drain | $350 – $1,200 | Custom recessed niche, teak or tiled bench, slot drain |
| Permits and inspection (Miami-Dade/Hialeah) | $150 – $450 | Plumbing permit, rough-in inspection, final inspection |
| Total project | $4,500 – $12,000 | Full scope, written, with a signed change order for any additions |
The single biggest driver is whether you’re keeping the existing drain location or moving it. A curbless or zero-threshold shower that requires us to recess the subfloor for a linear drain almost always lands in the $9,000 to $12,000 zone. A straightforward curb shower with tile walls and a prefab base sits comfortably at $5,500 to $7,500. Glass is the other swing: semi-frameless runs about $1,100 installed; a full frameless 3/8-inch panel with a 90-degree return and a self-closing hinge jumps past $2,200, particularly when the opening isn’t perfectly square in a 1970s Hialeah block home.
What Affects Walk-In Shower Installation Pricing in Hialeah
Hialeah isn’t generic. The building stock, plumbing codes, and climate here push costs in ways that a national pricing calculator won’t reflect. These are the factors we actually price against:
- Year the home was built. Much of Hialeah’s housing stock dates to the 1950s through the 1980s. We routinely find galvanized steel supply lines still feeding shower valves in homes built before 1975, and cast-iron drain lines that have corroded from the inside out. If the rough-in has to be re-piped in PEX or copper, that’s an additional $600 to $1,400 we price out on day one, not three days in.
- Concrete slab versus wood subfloor. Hialeah single-family homes on slab (which is most of them) require a different waterproofing approach than frame-floor construction. Recessing the drain for a zero-threshold shower means cutting concrete, which adds labor and time. Wood-subfloor homes near Palm Springs may need subfloor reinforcement if the joist spacing doesn’t meet the deflection standard for large-format tile.
- Florida code and Miami-Dade product approval. Every glass panel, shower valve, and waterproofing system we install has to carry a Miami-Dade NOA (Notice of Acceptance) or Florida Product Approval. That limits material selection slightly and adds a small premium over national brands that don’t carry the documentation. We handle the product-approval paperwork as part of the permit pull; it’s not a separate line item you pay for.
- High water table and humidity. Hialeah sits low. Bathroom exhaust here runs more than in drier climates, and moisture management matters. A properly sealed waterproofing system isn’t optional; we cure-test the membrane and flood-test the pan for 24 hours before we touch tile. A shower built without that step in a South Florida home typically fails at the pan within five years.
- Tile choice and layout complexity. Porcelain tile at $4 to $9 per square foot covers most of the market. Large-format 24-by-48-inch tiles require flatter substrate and more precise setting. Mosaic shower floor tiles (required for slip resistance and to drain properly) take longer to install and add $250 to $500 in labor.
- Glass size and configuration. A single fixed glass panel is straightforward. A corner return with a hinged door, or a neo-angle configuration, requires precise fabrication and adds 30 to 40 percent to the glass line. Custom-cut frameless glass for an opening that isn’t perfectly plumb runs $400 to $700 over stock sizing.

How to Save on Walk-In Shower Installation
There’s not much you can shave off the labor, because the waterproofing and tile work are the work. But there are legitimate levers:
- Keep the drain where it is. Choosing a curb shower instead of a zero-threshold design saves $600 to $1,500 in concrete cutting and drain relocation. If you’re not set on a completely curbless look, this is the single biggest cost lever.
- Use a prefab pan with tiled walls. A Kohler or Sterling shower pan runs $400 to $900 and eliminates the mud-bed labor. Tile the walls; leave the pan as-is. You get the walk-in look at roughly 30 percent less than a fully tiled wet-room.
- Choose semi-frameless over full frameless glass. The visual difference is smaller than the price difference. Semi-frameless lands around $900 to $1,300 installed versus $1,800 to $2,600 for frameless.
- Buy fixtures yourself, but check them first. We’re happy to work with customer-supplied Kohler or Moen fixtures, but they need to carry Miami-Dade approval and match the rough-in valve we’re installing. Send us the spec sheet before you buy; we’ll tell you whether it’s compatible in two minutes.
- Bundle with a bathroom remodel. If the shower is part of a larger bathroom project, our Hialeah service area team can combine permits and crew days, which typically saves $400 to $900 against two separate mobilizations. Full bathroom remodels in Hialeah run $9,000 to $28,000, and a small bathroom remodel runs $5,000 to $12,000; when you’re already opening the walls, the incremental shower cost is at the low end of the range.
Free estimates are standard here. Call (888) 836-5914 and we’ll get a number to you in writing. That written price is the same number you’ll see on the invoice unless a change is required and you’ve signed the change order approving it. No surprise line items on the final bill.
How Long Does a Walk-In Shower Installation Take in Hialeah?
Most walk-in shower installations in Hialeah take 5 to 9 working days on site, plus 2 to 4 weeks lead time for permits and glass fabrication. A prefab pan with tiled walls can be complete in 4 to 5 days. A fully tiled curbless wet-room with a linear drain and frameless glass runs 8 to 11 days, mostly because of the 24-hour flood test and the tile cure time between coats. Glass alone is usually a 3 to 5 week fabrication window in South Florida; we order it on day one to keep the schedule tight.
Repair or Replace? When a Walk-In Shower Makes Sense
If your existing shower is a 1990s cultured-marble unit with visible cracks in the pan, replacement is almost always the better economic call. A crack in the pan lets water into the framing every time you shower; we’ve opened walls in Hialeah homes where the studs behind the shower were soft enough to press a thumb into. Shower replacement in Hialeah runs $3,000 to $8,500; a tub-to-shower conversion runs $3,500 to $10,000. If the existing shower is a tub and you want to convert, the conversion price is typically lower than a from-scratch walk-in because the plumbing stack is already in the right place.
A repair only makes sense when the pan and membrane are intact and the issue is cosmetic. Re-grouting, re-caulking, or replacing a failed valve trim runs $200 to $600. If the membrane is compromised, repairing means rebuilding anyway, and you’re paying for the demo twice.
Why Choose Rowan Construction Group for Walk-In Shower Installation in Hialeah
We quote the same way we build: with a written scope, a written price, and a written warranty, all signed before we start. Every visit includes a photo record, not as an add-on but as a standard deliverable: you get photos of the substrate, the waterproofing, the flood test, and the finished work. Our technicians are background-checked and uniformed, and a live person answers the phone at any hour.
The written price on a walk-in shower doesn’t change unless we encounter something that wasn’t visible during the estimate, and no change proceeds until you sign the change order. That discipline is why our projects come in within a few percent of the agreed number. The 365-Day Done Right Promise applies to every walk-in shower we install: if it’s not right, we make it right, and the terms are printed on the estimate, not buried in an FAQ.
We’ve delivered more than 4,000 projects across seven trades since 2007, from bathroom remodels through home additions, and the same written-price discipline governs all of them. Our technicians bring up to 19 years of experience to each job.
FAQs – Walk-In Shower Installation Cost in Hialeah
How much does walk-in shower installation cost in Hialeah?
Walk-in shower installation in Hialeah costs $4,500 to $12,000, with most jobs landing between $6,800 and $9,200. The low end covers a curb shower with a prefab pan and tile walls plus semi-frameless glass. The high end is a fully tiled zero-threshold wet-room with a linear drain, custom niche, and full frameless glass. Call (888) 836-5914 for a free written estimate on your specific scope.
Is it cheaper to convert a tub to a walk-in shower or install a new one?
Tub-to-shower conversion is usually cheaper, running $3,500 to $10,000 in Hialeah versus $4,500 to $12,000 for a from-scratch walk-in. The conversion reuses the existing plumbing stack and drain location, which saves $600 to $2,200 in rough-in work. The exception is when the existing drain is cast iron and has to be replaced; in that case the two prices converge. Call (888) 836-5914 and we’ll tell you which path makes sense for your home.
Do I need a permit for a walk-in shower installation in Hialeah?
Yes. Any walk-in shower installation in Hialeah that involves plumbing changes, a new drain, or waterproofing requires a permit from the City of Hialeah Building Department under Miami-Dade County code. Cosmetic tile replacement without plumbing changes may not require one, but a permit is often needed even for a new pan. The permit and inspection fees run $150 to $450 and are included in our written estimate. Call (888) 836-5914 for a scope review.
How long does walk-in shower installation take in Hialeah?
On-site work runs 5 to 9 working days for most Hialeah installations. Permit approval takes 1 to 3 weeks depending on the department schedule, and frameless glass fabricates in 3 to 5 weeks. A prefab pan with tiled walls can be complete in 4 to 5 days on site; a fully tiled curbless shower runs 8 to 11 days. Call (888) 836-5914 and we’ll build your timeline into the written estimate.
Can you match a competitor’s price on a walk-in shower?
We offer a free second opinion on any written estimate you receive, and we’ll review it line by line at no charge. If a competitor’s quote is lower, we’ll tell you why (usually a missing line item like waterproofing, flood testing, or permit fee), and we’ll quote our own scope honestly rather than trimming the same corners. Our price is written and flat, and it doesn’t change without a signed change order. Call (888) 836-5914 to schedule your free estimate.
Get a Written Walk-In Shower Price for Your Hialeah Home
If you’re planning a walk-in shower project in Hialeah, we’ll put a flat written price in front of you before any demo starts. No phone estimates, no “we’ll see once we open the wall.” Call (888) 836-5914 for a free estimate. Bring a competitor’s written quote and we’ll review it line by line at no charge. Every visit includes a documented photo record, every crew is background-checked and uniformed, and a live person answers at any hour. The price you sign is the price you pay, unless you’ve signed a change order first.
Pricing reflects the Hialeah market as of 2026. Rowan Construction Group Hialeah offers free estimates – call (888) 836-5914.
What Our Customers Say
"Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T.












