







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Hialeah Owner’s Guide
We install Wellborn-compatible kitchen remodeling in Hialeah, with typical installed projects running $14,000 – $45,000 depending on cabinet line, countertop material, and layout changes. A single cabinet door, drawer box, or hinge can often be matched and replaced in one visit once we confirm the Wellborn series from the label inside the door. Most Hialeah owners discover the problem the same way: a soft-close drawer that stopped closing softly, a door that hangs a quarter-inch low, or a finish that has started to lift along the bottom rail near the sink. We hear it as “the cabinet is broken” when what actually failed is one component inside a system that is otherwise sound.
Which Wellborn Models This Applies To

Wellborn cabinets carry a label on the inside of the door or on the back panel of the cabinet box, and that label is the only reliable way to match a replacement part. It lists the series (Wellborn’s lines run from the value-focused Woodcrest and Sheffield families up through the premium Premier and Aspire tiers), the door style name, and the finish code. Door styles repeat across series, so two kitchens with visually identical doors can take different hinges and different drawer glide hardware. Take a photo of the label before you call anyone.
The OEM-versus-aftermarket decision depends on what failed. For hinges and drawer glides, a quality aftermarket equivalent from a brand like Blum or Grass is often as good as the original and sometimes better, and it costs less. For a door, drawer front, or a matching finish panel, you want the OEM part or a factory-matched refinish, because a mismatched sheen shows in daylight and Hialeah’s strong afternoon sun will make the difference plain within a month. We source through the brand’s own parts channel and through vetted suppliers, never from a bin of generic hardware. Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Wellborn.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Kitchen Remodeling Is Failing
The cabinet box rarely fails. What fails is the hardware and the finish, and Hialeah’s humidity accelerates both.
- Doors that hang out of alignment. The hinge plate has loosened from the cabinet side panel, usually because the screw holes have wallowed out in the particleboard core after years of humidity cycling. A hinge that no longer holds its adjustment is a sign of stripped screw holes, not a broken hinge.
- Drawers that stick or drop. Undermount glide rails collect crumbs and lose their alignment, or the glide’s mounting clips have cracked. A drawer that drops on one side almost always has a failed clip, not a failed box.
- Soft-close that slams. The damping piston inside the hinge or glide has worn out. It’s a small part, it’s replaceable, and it does not mean the cabinet needs replacing.
- Finish lifting at the toe kick and sink base. South Florida humidity wicks into the bottom edge of a door or panel where the finish is thinnest. Lifting veneer along the bottom rail is the first visible sign, and it spreads if the seal isn’t addressed.
- Swollen cabinet box panels. This one is serious. If the box itself has swollen from a slow leak under the sink, the part is no longer the problem and the cabinet run needs to be assessed before you spend money on doors.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Hialeah, cabinet installation runs $4,000 – $13,000 for a full run, countertop installation $2,000 – $6,500, backsplash $800 – $2,500, and an island $3,000 – $10,000. A complete kitchen remodel sits at $14,000 – $45,000, and a small kitchen remodel at $9,000 – $20,000. A targeted hardware swap (hinges, glides, a handful of doors) is far below those numbers and we quote it separately, with the part cost and the labor cost listed on separate lines so you can see exactly what you’re paying for.
What drives the range: the Wellborn series, whether you’re matching one door or refacing a run, countertop material (a Cambria or Silestone slab moves the number more than any other line item), and whether the layout changes. Under Clause 1 of The Haven Standard, the price is written before anyone starts, no work proceeds on a change until the change order is signed, and the workmanship carries our 365-Day Done Right Promise. Every visit includes a documented photo record as a standard deliverable.
DIY or Call Us?
You can safely photograph the label, measure the door, and note which hinge brand and pattern is stamped on the metal. That’s genuinely useful and saves a step.
Where DIY goes wrong is in the re-hang and the re-drill. Cabinet doors are heavy, they’re mounted above countertops and appliances, and a door that comes off its hinge while you’re holding it can crack a countertop edge or land on a hand. Stripped screw holes need to be filled and re-drilled at the right depth, not just driven harder, or the new hinge will loosen within months in Hialeah’s humidity. Finish repairs need the right sheen and the right sealer or the patch shows. This isn’t dangerous the way a garage door spring is, but it is fiddly, and a second attempt costs more than the first. Call (888) 836-5914 and we’ll tell you over the phone whether your issue is a part swap or something bigger.
FAQs

The cabinet box typically lasts 20 to 30 years or more; the hinges and glides usually need replacing at year 10 to 15, sooner in Hialeah’s humidity. South Florida’s year-round moisture is the main variable, and a cabinet run that sits under a poorly vented range hood or near a dishwasher will show wear first.
Often yes. A hinge with stripped screw holes can be repaired with the right insert, a soft-close glide can be re-clipped, and a lifting finish edge can be sealed. If the cabinet box has swollen or delaminated from water, it can’t be repaired and needs to be replaced. We’ll tell you which one you have after we see it. Call (888) 836-5914 for a free estimate.
A hardware swap (hinges, glides, a few doors) is usually done in a single visit of a few hours. A full door and drawer front replacement takes longer because the finish has to match and the parts have to be ordered from the Wellborn channel. A cabinet installation runs several days. We give you the timeline in writing before we start.
From the label inside the door. That label gives us the series, door style, and finish code, and we order through the brand’s parts channel and vetted suppliers. If the exact door style has been discontinued, we tell you that up front and quote a factory-matched refinish instead.
We also service KraftMaid, Cambria, and Silestone kitchens in Hialeah when the job calls for it.
If your Wellborn kitchen in Hialeah has a failing part and you want a written price before anyone picks up a tool, call Rowan Construction Group Hialeah at (888) 836-5914 for a free estimate. Bring a photo of the label inside the door and we’ll match the part and give you the number in writing. Estimates are free, the quote is a flat price with a written scope, and the work carries our 365-Day Done Right Promise.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












