







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Hialeah Owner’s Guide
Roof repair on a Tremron roof in Hialeah typically runs $400-$1,800, while a full roof replacement runs $8,000-$20,000 depending on the system and square footage. We install and repair Tremron-compatible roofing throughout Hialeah, and most repair estimates can be scheduled the same week. Owners usually call us after a single cracked or lifted shingle turns into a visible ceiling stain during a summer downpour, or after a roofer walks away with nothing in writing.
Tremron’s roofing line centers on concrete and clay roof tile systems that hold up far better than asphalt in South Florida sun, wind, and rain, though they still wear over time. Concrete tile can last 30-plus years, clay even longer, but the fragile part isn’t the tile surface. It’s the fasteners, the underlayment below it, and the mortar at the ridge and hips.
Which Tremron Models This Applies To

Tremron makes several roof tile profiles, and matching your part starts with identifying which profile you have. The three most common in Hialeah are the low-profile flat concrete tile, the high-profile barrel (S-shaped) concrete tile, and the clay barrel tile used on Spanish and Mediterranean roofs. Each has its own dimensions, fastening method, and matching accessory pieces like ridge caps and hip starters.
To identify your part, look on the back of a loose or broken tile. Tremron concrete tiles are typically stamped with a profile name and production code. Measure the exposed length (how much of the tile shows) and the width, then photograph it next to a tape measure and the stamp. That photo is what a supplier needs to confirm a match, because profiles with the same general shape can differ by fractions of an inch, and a mismatched tile won’t interlock or overlap correctly with the surrounding course.
On the OEM vs. aftermarket question, it depends on the part. For tile, matching the exact Tremron profile from a Tremron supplier is worth the effort: a color or shape mismatch is permanent and visible from the street. For fasteners and underlayment, high-quality aftermarket equivalents are often the better call and often the better product, as long as the underlayment meets Florida Building Code for the wind zone. We source Tremron plus compatible roofing materials from named suppliers, and our written quote tells you which is which. Rowan Construction Group Hialeah is an independent service provider, not affiliated with Tremron.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Roofing Is Failing
Hialeah’s summer heat and near-daily rain during the wet season are hard on any roof, and Tremron tile holds up well but still telegraphs its problems. Here are the symptoms we hear about most.
- Cracked or broken tiles. Hairline cracks spread in concrete from thermal cycling (hot days, cooler nights) and from foot traffic during earlier work. A cracked tile lets water past the surface and onto the underlayment, where the real damage starts.
- Lifted or slipped tiles. After high wind from a tropical system, tiles can lift enough to break the interlock and slide. Even a small gap invites wind-driven rain under the field of tile.
- Granules or grit in the gutters or at the drip edge. Concrete tile surfaces shed grit as they age, though heavy shedding can also signal broken tile. Grit clogging gutters starves drainage and pushes water back under the eaves.
- Water staining on ceilings or in the attic. Brown rings, damp insulation, or dark streaks on the underside of the sheathing mean water is getting past the tile and flashing. The tile isn’t the whole story; the leak is usually at a valley, chimney, or penetration.
- Sagging or spongy sheathing. Soft spots underfoot on the roof, or visible sag between rafters, can mean long-term moisture has rotted the deck. This is the one symptom that turns a repair into a bigger job if it’s ignored.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed repair and replacement pricing in Hialeah for Tremron-compatible roofing falls in these ranges. These are installed prices (materials plus labor), not just the part.
- Roof repair: $400-$1,800. Covers tile replacement, flashing repair, and localized underlayment work.
- Tile roof repair: $600-$2,500. For barrel and clay profiles where matching is harder and ridge/hip work is involved.
- Roof replacement: $8,000-$20,000. Full tear-off, new underlayment, and new tile.
- Metal roof installation: $15,000-$40,000. If you’re weighing a change in system.
What drives the range: roof size, tile profile (clay and barrel cost more than flat concrete), how much underlayment needs replacing, and whether the deck has any rot. A written quote breaks out materials and labor as separate lines, and it tells you the warranty on the work. Under our 365-Day Done Right Promise, if the repair fails within a year, we make it right.
DIY or Call Us?
Roof tile isn’t a job I’d hand a homeowner with a ladder and a weekend. Walking a tile roof risks cracking tiles and, more seriously, falling from height, and high wind and thin tile don’t mix. The safe things you can check from the ground: cracked or missing tiles visible with binoculars, grit in the gutters, ceiling stains, and the condition of your flashing at the chimney and vents. If you see any of those, it’s a call, not a climb.
Where DIY goes wrong on Tremron systems is the pieces you can’t see. The underlayment and fasteners dry out and fail before the tile does in Florida sun, and replacing a tile on top of dead underlayment just hides the leak for another season. Roof repairs run $400-$1,800 installed, which is rarely worth the risk of a fall or a bigger leak from a bad match. Call (888) 836-5914 to schedule a free estimate, and put the numbers in writing before anything is touched. A written price comes first, every time.
FAQs

Expect 30-plus years from concrete tile and longer from clay, but the underlayment can fail in as little as 15 to 20 years in South Florida’s heat and UV. The tile often outlives the layer holding it, which is why a 20-year-old roof that looks fine can still leak.
Yes in most cases: single tiles, flashing, and even a partial underlayment section can be repaired for $400-$2,500 depending on the profile and scope. Replacement makes sense once the underlayment is failing across most of the roof.
A localized repair is usually a half to a full day; a full Tremron roof replacement typically takes several days to two weeks depending on size and weather. We give you the timeline in writing with the quote.
We match your tile profile from a photo and stamp, then order through Tremron suppliers and compatible roofing sources. Because the exact profile matters for a visible match, this is one place we stick with OEM sourcing.
Rowan Construction Group Hialeah also handles other trades and brands, including KraftMaid, Cambria, and Silestone, under written quotes across the board. Our technicians have up to 19 years of experience, and a live person answers calls 24/7. Call (888) 836-5914 for a free estimate on your Tremron roof.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












