







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Hialeah Owner’s Guide
Schluter bathroom remodeling in Hialeah typically runs $9,000 – $28,000 installed, with membrane, drain, and trim work quoted as line items in a written price before any tile comes up. We install Schluter-compatible showers, floors, and waterproofing assemblies, and we can usually schedule an assessment within the same week you call.
Hialeah owners rarely discover a Schluter failure through a dramatic leak. They find it in a soft grout line at the shower curb, a hollow thud under a floor tile, or a drain flange that has started to rust at the weep holes. Because Schluter systems fail from the outside in, the visible symptom is usually the last part of the assembly to go bad, not the first. What looks like a tile problem is almost always a waterproofing question underneath it.
Which Schluter Models This Applies To

Schluter makes a lineage of waterproofing and tile assemblies, and matching the right component depends on which generation you have. The Kerdi line is the longest-running: Kerdi-Board and Kerdi membrane for walls, Kerdi-Band for seams, Kerdi-Fix sealant for penetrations, and the Kerdi drain series (Kerdi-Drain, Kerdi-Line for linear drains) with ABS, PVC, and cast-iron bonding flange options. The Ditra line handles floor decoupling: standard Ditra for most tile, Ditra-XL for large-format stone, Ditra-Heat for heated floors. Schluter-Profile trim pieces (Jolly, Rondec, Trep-B, Quadec) look cosmetic but carry a specific profile height measured in millimeters – a 10mm profile will not finish a 12mm tile edge cleanly.
To identify what you have, look for the printed membrane roll label (often on the remaining edge), the drain grate stamp, or the profile edge facing the room. Measure tile thickness with calipers, not a tape. OEM Schluter components carry a color-coded fleece and embossed logo; aftermarket copies are common at big-box stores and rarely match the bonding flange height exactly. On a Hialeah bathroom, that 1 – 2mm mismatch is what lets water wick behind a shower curb over two rainy seasons. Rowan Construction Group Hialeah is an independent service provider, not affiliated with Schluter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
- Hollow or drummy floor tiles. Tap a coin across the floor. A sharp, echoing tap means the thinset has unbonded from the Ditra waffle or the tile from the membrane. In Hialeah’s humidity, this usually starts near the room threshold where slab moisture migrates.
- Grout cracking along the shower curb or niche. Cracks running in a single line over a Kerdi band suggest movement at the seam, not simple grout settling. Schluter’s fleece requires a full 2-inch overlap; a short lap or missing Kerdi-Fix at the corner is the underlying cause.
- Musty smell at the base of the shower wall. That odor is trapped moisture in the substrate. If the Kerdi membrane was installed over greenboard instead of cement board or Kerdi-Board, the paper face absorbs water and the membrane holds it against the wall.
- Rust or debris at the drain weep holes. A Kerdi-Drain flange with visible rust means the bonding flange is cast iron and the coating has failed. Hialeah’s hard water accelerates this; homeowners often mistake it for a simple clogg
- Water staining on the ceiling below. This is the loud symptom. It usually means a Kerdi-Line linear drain was set slightly out of level, so water pools against the flange seal and eventually finds the subfloor penetration.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full Schluter bathroom remodel in Hialeah runs $9,000 – $28,000. A small bathroom remodel is $5,000 – $12,000. A walk-in shower install with new Kerdi membrane, drain, and tile is $4,500 – $12,000. A tub-to-shower conversion is $3,500 – $10,000, and a straight shower replacement (same footprint, new waterproofing) is $3,000 – $8,500. Vanity installation is $800 – $3,000 and countertop work $2,000 – $6,500 if you are using Cambria or Silestone.
The range is driven by three things: whether the existing assembly can be salvaged or must come down to the studs, whether the drain line needs relocation (cast-iron to PVC), and the tile specification. Parts and labor are quoted as separate line items so you see what the Kerdi-Drain, Kerdi-Board, and thinset cost versus the tile setter’s hours. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. Every installation carries our 365-Day Done Right Promise.
DIY or Call Us?
You can safely check most of what matters. Run a coin tap test across the floor. Shine a flashlight along the shower curb seam and look for a hairline crack. Look at the drain grate and flange for rust. Feel for soft spots at the base of the shower walls. Those checks are diagnostic, not destructive.
Where DIY goes wrong is in the repair. Schluter’s system fails or succeeds on watertight laps – a Kerdi band must overlap the membrane by a full 2 inches, sealed with Kerdi-Fix, and the drain flange must sit flush in the thinset bed with no voids. Pulling up a single tile and re-bonding it over a compromised membrane traps moisture under a patch and pushes the failure sideways into the next room. That is the repair we get called to undo. Call (888) 836-5914 for a free estimate; we will bring a moisture meter and tell you plainly whether you are looking at a patch or a rebuild.
FAQs

Fifteen to 25 years when correctly installed, but Hialeah’s high humidity and near-constant air conditioning cycling shorten that on any assembly with a short lap or a missed sealant at a penetration. We have opened showers installed eight years ago that were failing at the curb because a single Kerdi band was overlapped by 1 inch instead of 2. Call (888) 836-5914 for an exact quote on a rebuild.
Sometimes. A failed Kerdi profile trim or a single compromised shower niche can be replaced without tearing out the whole shower wall. A failed bonding flange at the drain almost always requires a drain swap and re-tiling the shower floor, because the membrane must be cut back to the studs. We tell you which one you have after the moisture meter reads, not before.
A shower assembly replacement typically runs three to five working days, including demo, Kerdi installation, cure time, tile set, and grout. A vanity or trim-piece swap is a single day. Total timeline is written into your scope before work begins, and any extension requires a signed change order – that is the discipline the Haven Standard is built on.
We source through regional distributors who stock genuine Schluter Kerdi, Ditra, and Profile components; specials like Kerdi-Line linear drains or cast-iron bonding flanges are ordered to spec with a documented lead time. We do not carry stock on a truck, so the part is matched to your specific model and tile thickness before it ships. Bring a competitor’s written estimate and we will review it line by line at no charge.
If your Hialeah bathroom is showing any of these symptoms, stop patching and get a written assessment. Call (888) 836-5914 to schedule your free estimate. Rowan Construction Group Hialeah is a licensed and insured independent contractor and is not affiliated with Schluter.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












