







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Kitchen Remodeling: The Hialeah Owner’s Guide
Kitchen remodeling where Mr-Glass materials are part of the scope typically runs $14,000 to $45,000 installed in Hialeah, with smaller galley kitchens landing closer to $9,000 to $20,000. We source the replacement cabinet, countertop and backsplash components to match what’s already in your kitchen, and we schedule the estimate rather than the job: call (888) 836-5914 and we’ll put a written price in front of you before anything gets touched. Most Hialeah owners find out a component has failed the same way: a cabinet door that won’t sit flush after a humid summer, a countertop seam that opens a hairline gap, or a backsplash tile that lifts at the edge because the thinset never bonded to the substrate.
Key Takeaways
- Mr-Glass-branded kitchen components are matched by measurement and series, not by guesswork.
- Installed kitchen remodeling in Hialeah: $14,000 to $45,000. Cabinet-only work: $4,000 to $13,000.
- We are an independent contractor and are not affiliated with Mr-Glass.
- Every quote is a flat written price with a written scope before work starts.
Which Mr-Glass Models This Applies To

Mr-Glass has supplied cabinet door fronts, framed cabinet boxes, and slab and laminate countertop components through a handful of product lines that changed spec quietly over the years. The identifying label is almost always on the inside face of a cabinet door or on the back edge of a drawer box: it lists a series name, a finish code and a nominal size. If the label is gone, we measure instead. Door thickness, hinge bore pattern (the spacing between the two cup holes and the plate screws), overlay amount and box depth are what actually determine whether a replacement matches. Two cabinets that look identical from the front can differ by 4 mm in overlay and won’t line up.
On the OEM-versus-aftermarket question for Mr-Glass specifically: exact-match OEM door fronts are the right call when a kitchen is only partially damaged and the remaining fronts must stay visually identical. For a full kitchen where every door and drawer front is being replaced, a quality equivalent in the same overlay and finish reads the same in daylight and costs meaningfully less. We quote both and show you the difference in writing. Under Clause 1 of the Haven Standard, that number is written before any work begins. KraftMaid and Cambria are the two brands we quote most often as equivalents in Hialeah kitchens, and we also service KraftMaid, Cambria and Silestone installations.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Kitchen Remodeling Is Failing
- Cabinet doors that drag or won’t close flush. In Hialeah’s humidity, a particleboard or MDF core absorbs moisture at the hinge bore and swells – the door hasn’t warped from heat, the bore has grown. Once that bore is oversized, re-hanging the door won’t fix it.
- Hairline gaps along a countertop seam. A seam that opens is usually a failed color-matched epoxy joint or a substrate that moved underneath. Left alone, moisture tracks into the gap and stains the cabinet carcass below.
- Backsplash tiles lifting or hollow-sounding at the edge. That’s a bond failure between thinset and substrate, most often on drywall that was never properly primed. Tapping with a knuckle tells you more than looking.
- Drawer boxes separating at the corner joint. Repeated load in a humid kitchen works the staples loose. A box that racks side to side when you pull it is on its way out.
- Finish checking or peeling on door fronts near the range. Heat and steam cycling against a laminate or painted finish causes the film to lift at the edges first. By the time you see it, the moisture has usually already reached the core.
Replacement Cost & What’s Included

Installed pricing in Hialeah, quoted as a flat number with a written scope:
- Full kitchen remodel: $14,000 to $45,000
- Small kitchen remodel: $9,000 to $20,000
- Cabinet installation: $4,000 to $13,000
- Countertop installation: $2,000 to $6,500
- Backsplash installation: $800 to $2,500
The range is driven by cabinet count and box depth, whether the existing layout is being kept, countertop material and edge profile, and how much substrate repair the backsplash wall needs once the old tile comes off. Parts and labor are quoted as separate line items so you can see what the material costs versus what the installation costs. The work is covered by the 365-Day Done Right Promise – if it isn’t done right, we make it right. Every visit includes a documented photo record of what we found and what we did.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do the diagnosis yourself: check the inside of cabinet doors for the label, measure door thickness with a tape, count the overlay gap with a feeler gauge or a folded piece of paper, and tap the backsplash to listen for hollow spots. Bring those numbers to the call and the quote gets sharper. Where homeowner work goes wrong on kitchens is the removal and rebuild: pulling tile off a backsplash wall can open the drywall behind it, and re-setting a countertop seam requires the substrate flat within a tolerance a level on a kitchen floor won’t measure. Cabinet carcasses that have swelled at the hinge bore cannot be repaired by tightening screws, and inserting a larger screw splits the core further. If your kitchen has gas at the range, any work that requires disconnecting it belongs to a licensed trade. For anything beyond diagnosis, call (888) 836-5914 and let a background-checked, uniformed technician confirm it in person.
FAQs

Expect roughly 10 to 15 years for cabinet boxes and door fronts in a South Florida kitchen, shorter for anything facing the range or a dishwasher vent. The limiting factor here isn’t wear, it’s humidity: Hialeah’s average relative humidity sits in the high 70s for much of the year, and particleboard cores take on moisture at any exposed or bored edge. Call (888) 836-5914 for an exact quote – estimates are free.
Sometimes. A door with a sound core can often be re-bored and re-hung, and a single failed countertop seam can be re-epoxied if the substrate underneath is still flat. Swollen MDF and delaminated laminate can’t be repaired, only replaced. We’ll tell you which one you’re looking at before quoting. Call (888) 836-5914 for a free second opinion on any written estimate you already have.
Cabinet door and drawer front replacement is typically a one-day job once the matched parts arrive. A full cabinet and countertop installation in a Hialeah kitchen runs several days, and a complete remodel runs multiple weeks. The timeline is written into the scope before work starts, and no change proceeds without a signed change order. Call (888) 836-5914 and we’ll put the schedule in writing.
By measurement and series code, not by model name alone. We read the label inside the door if it’s still there, then verify thickness, bore pattern and overlay against the existing set. Where OEM fronts aren’t available, we match against equivalent lines and show you the sample before ordering. Our technicians have up to 19 years of experience, and every quote is a flat written price. Call (888) 836-5914 to schedule your free estimate.
Get a Written Price for Your Hialeah Kitchen
Rowan Construction Group Hialeah is an independently owned and operated contractor and is not affiliated with Mr-Glass. If your kitchen is due for a rebuild or a single failed component has finally given out, call (888) 836-5914 for a free estimate. We’ll tell you what we found, quote the number in writing, and put the 365-Day Done Right Promise behind the work – backed by The Haven Standard, not a handshake.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












