A Rowan company - serving Hialeah, FL
A remodeled primary bathroom with a soaking tub and a walk-in shower
Moen · Hialeah

Moen Bathroom Remodeling in Hialeah, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Hialeah
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A new paver pool deck
An open kitchen and dining area after a remodel
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Bathroom Remodeling: The Hialeah Owner’s Guide

Moen-compatible bathroom remodeling in Hialeah runs $9,000 to $28,000 installed, and most of that work is scheduled, not same-day. When a Moen faucet, shower valve, or trim kit is the reason for the call, we can usually confirm the model and the correct cartridge or trim within one visit. Owners find out something is wrong the same way every time: a slow drip at the spout that survives a handle rebuild, a shower that won’t hold temperature, or a rough-in valve that no longer lines up with new tile.

Call (888) 836-5914

Which Moen Models This Applies To

A tile setter installing wall tile in a shower

Moen splits its residential line across several families, and the part number depends on which one you have. The Posi-Temp and M-CORE valve lines use different rough-in dimensions, so a cartridge that fits one will not seat in the other. The single-handle 1222 and 1225 cartridges sit in a different body than the dual-handle Monticello and Kingsley trim kits. Identifying the model starts with what is printed on the trim plate or the underside of the escutcheon, not the box the faucet came in. If the label is gone, the valve body behind the wall carries a stamp, and that stamp is the part number we order against.

The OEM-versus-aftermarket decision matters more with Moen than with most brands. Genuine Moen cartridges carry a limited lifetime warranty on the cartridge itself, and installing a third-party replacement can void that coverage. On a bathroom remodel in Hialeah, we price both options in writing so the owner can see the difference. Our technicians have up to 19 years of experience matching parts to valve bodies, and that matters in a city where older units from the 1970s and 1980s still have their original rough-ins.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Bathroom Remodeling Is Failing

  • Water temperature that won’t hold. A worn Posi-Temp pressure-balancing spool lets hot and cold cross over. This is the most common shower complaint we hear in Hialeah.
  • A drip at the spout after the handle is off. The cartridge seal has failed, and the drip gets worse as mineral deposits build on the seat.
  • The handle feels stiff or spongy. Hard water in South Florida leaves calcium on the cartridge stem, and the trim starts binding against it.
  • Water behind the wall or a soft spot in the tile. A failed rough-in valve or a loose connection at the shower body can leak into the substrate for months before it shows.
  • Trim that no longer sits flush. A shifted valve body or a warped escutcheon points to movement behind the wall, which needs to be opened and inspected, not patched.

Replacement Cost & What’s Included

A new white vinyl privacy fence with a double gate

Bathroom remodeling in Hialeah runs $9,000 to $28,000, and that figure includes the Moen fixture package along with tile, waterproofing, and labor. A smaller bathroom lands between $5,000 and $12,000. If the scope is limited to a shower function change, a tub-to-shower conversion is $3,500 to $10,000 and a walk-in shower is $4,500 to $12,000. A shower replacement on its own is $3,000 to $8,500, and a vanity install is $800 to $3,000.

The range moves on three things: whether the valve body has to be replaced or just the cartridge, whether the wall has to be opened for waterproofing, and what tile and trim the owner chooses. Every quote is a flat written price with a written scope before work starts, and parts are itemized separately from labor so the owner sees what the Moen cartridge or trim kit costs on its own. Under Clause 1 of the Haven Standard, the price is written before anyone starts. No change proceeds without a signed change order, and the work carries the 365-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

An owner can safely check the trim plate for the model number, look for a drip, and note whether the temperature is drifting. That is where the safe part stops. Replacing a Moen cartridge means shutting off the water at the main and pulling a part that sits under pressure against a valve body that can crack if it is forced. Older Hialeah units sometimes have no local shutoff at the fixture, which means the whole unit goes dry mid-job. That is a call to us, not a weekend project. A failed rough-in valve behind tile is a wall-opening job, full stop.

What we do is honest: we open what needs opening, show the owner the condition of the substrate and the valve body in a documented photo record, and price the fix in writing. Call (888) 836-5914 for a free estimate, and bring a competitor’s written quote if you have one. The Free Second Opinion applies to any estimate you bring us.

FAQs

New painted shaker cabinets with an organized deep drawer

How long does a Moen cartridge or shower valve last in Hialeah? Genuine Moen cartridges typically last 10 to 15 years in a home with average water hardness, but Hialeah’s water runs hard enough that we see failures closer to the 7 to 10 year mark. The calcium load in South Florida water is what shortens the life, and the first sign is usually a stiff handle. Call (888) 836-5914 and we will price a replacement in writing.

Can a failed Moen part be repaired instead of replaced? Often yes. A cartridge seal can sometimes be cleaned and reseated, and a pressure-balancing spool can be swapped without touching the tile. If the valve body itself is cracked or the wall is wet, replacement is the honest answer. We tell the owner which one it is after we open the escutcheon and look.

How long does the swap take? A cartridge replacement is a short visit, usually a couple of hours once the correct part is on site. A full shower replacement is scheduled over several days. Remodels are quoted and scheduled on a written timeline, and the crew arrives uniformed and background-checked with a photo record as a standard deliverable. Call (888) 836-5914 to schedule a free estimate.

How do you source the part? We order against the valve body stamp or the trim plate number, from Moen’s genuine line or a vetted equivalent, and we show the part number on the quote. We also work with KraftMaid, Cambria, and Silestone on the cabinetry and surface side of the same room, so a bathroom in Hialeah can be quoted as one scope. Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Moen.

Get a Written Price Before Work Starts

If a Moen faucet, shower valve, or trim kit is behind your bathroom project, the useful next step is a number in writing. Rowan Construction Group Hialeah quotes a flat price with a written scope, itemized parts and labor, and the 365-Day Done Right Promise on every job. Call (888) 836-5914 for a free estimate. A live person answers around the clock, and you will leave with a documented photo record of what we found and what we recommend.

Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new paver patio with a seat wall and fire pitA single-story rear room addition with tall windows and a new patioA new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gateA new bay window with a cushioned seat

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Hialeah

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Hialeah team

A local vetted partner works across Hialeah and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 836-5914
Local Service Coverage

Request a Free Estimate in Hialeah

Tell us what you need - Rowan Construction Group Hialeah responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch