







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Hialeah Owner’s Guide
If you’re planning a Kohler-finished addition or ADU in Hialeah, the honest installed range is $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached or attached ADU, depending on square footage, foundation work, and how much of the finish package is Kohler. We’re an independent service provider, not affiliated with Kohler, and we quote a flat written price before a single permit is pulled.
Owners in Hialeah usually end up reading this page after a different trigger: the Kohler fixture in an existing addition or converted garage starts failing. A toilet that rocks on a soft subfloor, a shower valve that won’t hold temperature, a faucet cartridge that drips after two years. That’s when the questions get specific, and when the finish brand suddenly matters to the repair.
Which Kohler Models This Applies To

Kohler doesn’t make additions or ADUs. What Kohler makes is the fixture and finish layer that goes inside one: toilets from the Wellworth and Santa Rosa lines, shower valves and trim from the Rite-Temp and Purist families, kitchen faucets, and the cast iron and vitreous china pieces people specify when they’re building something permanent. So “Kohler-compatible” means the rough-in dimensions, valve bodies, and trim kits match what was actually installed.
To identify what you have, look for the model number stamped on the inside of the toilet tank lid or under the fixture rim. For shower valves, pull the trim plate and read the rough-in valve body, not the handle. That distinction matters: Kohler trim kits are sold separately from valve bodies, and a replacement trim that looks right in the box won’t fit a valve body from a different series. In an ADU or addition, the rough-in was set months before the trim went on, so the two may not match what the original spec sheet says.
The OEM-versus-aftermarket call is real. For Kohler toilets and faucets, genuine parts cost more but match the original geometry exactly. For a cast iron tub or a shower base, aftermarket is rarely worth the risk. For finish hardware, quality equivalents exist and we’ll tell you which ones we’d actually stand behind.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Kohler Home Additions & ADU Is Failing
- A toilet that rocks or a floor that feels soft around the base. In Hialeah’s humidity and high water table, a slow wax seal leak rots the subfloor before you see water. The rock is the symptom; the seal and flange are the cause.
- A shower valve that won’t hold temperature. The pressure-balancing cartridge inside a Kohler Rite-Temp valve wears out before the trim does. It’s a $30 part inside a $400 fixture, and the failure looks like a plumbing problem rather than a cartridge problem.
- Dripping or stiff Kohler faucets. Hialeah’s water is hard, and mineral scale seizes ceramic cartridges. A faucet that drips a cup an hour wastes water silently for months.
- Hairline cracks in a cast iron or vitreous china fixture. Seasonal temperature swings and slab movement stress the enamel. A crack in a toilet tank or a tub floor is a replacement, not a repair.
- Condensation or staining on addition walls near fixtures. A shower installed without a proper waterproofing membrane behind it will show moisture in the drywall within a season. The membrane is the failure, not the tile.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Hialeah. These are installed prices, parts and labor together, not parts alone.
| Scope | Installed price range |
|---|---|
| Home addition (full scope) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
| Bathroom remodel within an addition | $9,000 – $28,000 |
| Shower replacement | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
The range is driven by square footage, whether you’re pouring a new slab or tying into an existing one, impact-rated window and door requirements, and how much of the fixture package is Kohler versus Kohler-equivalent. Every quote is a flat written price with a written scope. No change proceeds without a signed change order, which is why our projects land within a few percent of the number you agreed to. The work carries our 365-Day Done Right Promise.
DIY or Call Us?
Some things you can check safely yourself. Read the model number on the tank lid. Look under the sink for a supply line you can tighten by hand. Photograph the rough-in valve before you buy a trim kit, so you know what you’re matching. That’s diagnosis, and it saves everyone time.
What we’d stop you from doing is opening a wall to trace a shower valve, resetting a toilet on a soft subfloor, or pulling a permit on an addition yourself. The last one isn’t a safety issue, it’s a code issue: an unpermitted ADU in Hialeah can cost you at resale and at insurance. And where the work involves gas lines, electrical, or structural framing, that’s not a weekend project, it’s a licensed trade for a reason.
Call (888) 836-5914 and we’ll tell you what we found and what it takes to fix it. Estimates are free, and so is a second opinion on any written estimate you already have.
FAQs

A Kohler toilet or cast iron tub should last 20 to 30 years, but the parts around it fail sooner: wax seals, cartridges, and supply lines every 5 to 10 years in South Florida’s hard water and humidity. The fixture outlasts the install if the seal and membrane behind it are done right. Call (888) 836-5914 for a free assessment.
Usually yes, and we’ll say so before we quote a replacement. Cartridges, flappers, fill valves, and seals are all serviceable, and the cost is a fraction of a new fixture. Cast iron with a hairline crack, or a toilet flange that’s rotted the subfloor, is a replacement. Call for a free estimate and we’ll tell you which one you have.
A cartridge or flapper swap is under an hour. A shower valve replacement is a half-day, because the wall has to open and close. An addition or ADU runs months, not days, and we schedule it that way, with a written timeline before work starts. Call (888) 836-5914 for a scope and a date.
We source through Kohler’s authorized distribution and match the part to your model number, not to what looks close on a shelf. We don’t carry parts on a truck and we won’t claim to. What you get is the right part, verified against the rough-in, plus a documented photo record so you know what was found and what was installed. We also work with KraftMaid, Cambria, and Silestone when the scope calls for cabinets or counters. Call for your free estimate.
Whether you’re pricing a full Kohler-finished addition in Hialeah or just need a failed fixture sorted out, start with a call. Call (888) 836-5914 to schedule your free estimate. We’ll put the number in writing before anyone picks up a tool, and you’ll have the photo record in hand when the crew leaves.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












