







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Hialeah Owner’s Guide
We install and repair Jerith-compatible driveway and paver systems across Hialeah, and a full paver driveway installation runs $7,000 – $18,000 installed, with most Hialeah homes landing between $9,500 and $14,000 depending on square footage, base prep, and whether old concrete or asphalt has to come out first. Driveway sealing, the routine maintenance task that keeps a paver surface tight and weed-free, runs $250 – $700. If a panel has heaved, a border course has shifted, or the base under a stretch of pavers has settled, we can usually look at it within days of your call, not weeks.
Owners in Hialeah tend to discover the failure the same way. A paver rocks underfoot when they walk to the mailbox. A joint line that used to be tight now shows a finger-width gap after the summer rains. Or a border course along the driveway apron at the sidewalk has pushed out of line, and the whole edge looks like it’s leaning toward the street. What looks like a paver problem is almost always a base problem, and in Hialeah’s soil and rain pattern, that distinction decides whether a repair holds or comes back.
Which Jerith Models This Applies To

Jerith manufactures paver profiles in several series, and the part that fails is rarely the paver face itself. It’s the base, the edge restraint, the joint sand, or the polymeric joint material holding the field together. To match the right replacement material, find the stamped identifier on the underside of a loose paver or on the edge of an exposed one at the driveway apron, and measure the unit: length, width, and thickness in millimeters. Jerith pavers commonly run in the 60mm to 80mm thickness range for residential driveways, which matters because a 60mm unit and an 80mm unit are not interchangeable in a driveway that takes vehicle load. Matching the exact profile keeps the field consistent; matching the thickness keeps the surface stable.
The OEM-versus-aftermarket call for Jerith is straightforward. If the goal is a like-for-like patch, the original profile and color are worth sourcing. If a full section is being rebuilt and the color match is close enough, a quality aftermarket equivalent in the same thickness and a compatible color family will perform the same underfoot and cost less per square foot. We’re an independent service provider, not affiliated with Jerith, so we’ll tell you plainly which route makes sense for your driveway rather than pushing one. We also work with Belgard and Techo-Bloc pavers, and with KraftMaid, Cambria, and Silestone on the interior side of the house.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
In Hialeah, the failure pattern follows the water. Here are the symptoms we see most and what’s actually underneath each one.
- Pavers rocking or loose underfoot. The bedding layer has washed out beneath the unit, usually after water found a path through failed joints. A rocking paver is a hollow pocket waiting to spread.
- Widening joint lines and joint sand loss. Hialeah’s wet season sends rain hard enough to flush joint sand out of the gaps. Once the sand is gone, the pavers shift against each other and the field loses its interlock, which is what holds a paver driveway together.
- Border and edge restraint failure. The edge course along the apron or the property line pushes out when the plastic or concrete edge restraint has cracked or pulled its stakes. Without that restraint, the field spreads under vehicle load and the border is the first thing to go.
- Settling or dips forming a channel. A low spot where water pools after rain points to base compaction that didn’t hold, often where fill was placed over an older concrete slab that was never broken out.
- Weeds and joint material breaking down. Polymeric joint material in South Florida sun degrades faster than in cooler climates. When it cracks and pulls away, weeds move in and joint integrity follows.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Hialeah, written before any work starts: a full paver driveway installation runs $7,000 – $18,000; a driveway replacement, where old surface comes out and new goes in, runs $5,000 – $14,000; a paver patio installation runs $3,500 – $11,000; and driveway sealing runs $250 – $700. If the failing component is a concrete or asphalt section rather than pavers, concrete driveway installation runs $4,500 – $12,000 and asphalt driveway paving runs $3,500 – $9,000.
What drives the range: total square footage, removal and haul-off of the old surface, base depth and compaction, and whether the edge restraint needs full replacement or just re-staking. The quote is a flat price with a written scope and a written warranty, so you know what’s included before anyone picks up a tool. If the scope changes mid-job, no work proceeds on that change until the change order is signed. Every visit includes a documented photo record of what we found and what we did, standard on every job, not an add-on.
DIY or Call Us?
Some of this you can safely check yourself. Walk the driveway after a dry day and note which pavers rock; measure a joint gap; look at the edge restraint along the apron for cracks or pulled stakes; and check where water pools after a rain. Those notes are useful, and they’ll help us quote accurately.
Where DIY goes wrong is in the rebuild. Pulling a settled paver means re-establishing the bedding layer and re-compacting the base in lifts, and on a Hialeah driveway that base has to handle both vehicle load and heavy seasonal rain. Improperly compacted base fails the next wet season, and a patch that isn’t tied back into the field spreads. That’s not a job for a weekend and a rented plate compactor. Our technicians have up to 19 years of experience, and we’ll tell you honestly whether a section repair will hold or whether the base needs rebuilding. A free second opinion on any written estimate is standard: bring a competitor’s quote and we’ll review it line by line at no charge. Call (888) 836-5914 to schedule your free estimate.
FAQs

A properly installed paver driveway with a compacted base and intact edge restraint will last 25 to 30 years in Hialeah’s climate. The pavers themselves outlast the system around them: joint sand and polymeric joint material need refreshing every few years because South Florida’s sun and rain break them down faster than in cooler markets. Call (888) 836-5914 for an exact quote on a repair or reseal.
Yes, often. A single settled or rocking section with sound base on either side can be lifted, re-bedded, and re-set with new joint material at a fraction of full replacement cost. If the base underneath is compromised across a wide area, though, a patch won’t hold, and we’ll say so plainly. Call (888) 836-5914 for an exact quote; estimates are free.
A localized repair typically takes half a day to a full day. A full driveway replacement runs three to five days once the base is prepped and curing time is factored in. We’ll give you the timeline in writing with the quote so you can plan around it. Call (888) 836-5914 to schedule your free estimate.
We identify the profile and thickness from the stamped markings and a physical measurement, then source the matching material or a same-spec equivalent. We don’t claim to carry parts on a truck, and we won’t pretend a close match is exact. We’ll show you the material before it goes down. Rowan Construction Group is an independent service provider and not affiliated with Jerith. Call (888) 836-5914 for a free estimate.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












