







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Bathroom Remodeling: The Hialeah Owner’s Guide
We install and repair Jerith-compatible bathroom remodeling components in Hialeah, with a full bathroom remodel typically running $9,000 – $28,000 and a targeted shower replacement at $3,000 – $8,500. If you’re chasing one failed part, a repair visit is a different, smaller number, and you get it in writing before anyone touches the bathroom. Jerith products sit inside the same enclosed wet-space reality as any other system: they are exposed to Hialeah’s year-round humidity, which averages above 70 percent through the summer, and to water that never fully dries between showers. Owners usually find out something failed the same way: a ceiling stain on the floor below, a soft spot at the shower base, or a caulk joint that keeps reopening no matter how many times it’s redone.
Which Jerith Models This Applies To
Jerith is a regional manufacturer of shower stalls, shower bases, bath surrounds, and related wet-space components, and the same wall panel sold under one model number can differ from another in thickness, flange depth, and drain opening location. Before we quote anything, we identify what’s actually there: the model label (usually on the back of the base or inside the panel flange), the actual field measurements, and the drain centerline, because a replacement base that is off by a half inch on the drain means your new unit doesn’t seal. We work from measurements, not catalogs. The OEM-versus-aftermarket decision is straightforward: an OEM Jerith part guarantees fit to your existing surround and matches the original finish; a quality aftermarket equivalent can save money but only if the flange depth and drain dimensions match within a documented tolerance. If we can’t confirm the match, we tell you and measure again rather than order and hope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Bathroom Remodeling Component Is Failing
- A recurring, soft damp spot at the shower base perimeter. That’s usually the base-to-tile caulk line breaking down, or a weep-path failure underneath. Caulk that keeps reopening is the symptom; the cause is often movement or a damaged flange, not the caulk itself.
- Water staining or bubbling paint on the ceiling below the bathroom. This is your clearest sign the pan or drain seal has failed. In Hialeah, where a slow leak has months of warm, humid weather to spread, it can reach the subfloor before you notice it.
- Mold that returns to the same grout or silicone joint no matter what you clean it with. Mold that always regrows in the same line is moisture getting behind the surface. Cleaning the visible growth doesn’t reach it.
- Hairline cracks in the shower base or tub surround. A crack looks cosmetic at first. Under a Jerith-style acrylic base, a crack lets water pool against the substrate and starts to delaminate it.
- A drain that’s slow only at the shower or a loose, rocking base panel. Slow drainage pointed at one fixture is often a partial seal or alignment problem, not a house-wide plumbing issue. A rocking base means the subfloor beneath it has moved or softened.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included in Hialeah

For Hialeah, here’s what the actual work runs, so you can compare against any other quote without a phone call:
- Shower replacement (Jerith-compatible base and surround): $3,000 – $8,500
- Tub-to-shower conversion: $3,500 – $10,000
- Walk-in shower installation: $4,500 – $12,000
- Bathroom vanity replacement: $800 – $3,000
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
What drives the range: whether the subfloor and stud cavity are sound or soft, how the drain and valve rough-in lines up with the new unit, and whether the surround comes in a standard or custom measurement. Our written quote separates parts and labor so you can see both. The quote is a flat number with a written scope before work starts, and any change needs a signed change order first. Workmanship is covered under our 365-Day Done Right Promise; if it’s not done right, we make it right.
DIY or Call Us?
You can safely check, and should check: the caulk line at the base and walls, the model label location, the drain centerline measurement, and whether the floor beneath the base feels soft when you press it. What goes wrong with DIY starts with two things. First, a shower base is a pre-sloped, load-bearing unit, and setting one out of level or without proper bedding means water runs the wrong way; it fails slowly and quietly. Second, any repair that opens the wet wall puts you near the valve and electrical connections at the shower, and water plus electricity in the same opening is no place to learn. If a fix means anything more than re-caulking and re-sealing, call us at (888) 836-5914. The free estimate costs nothing, and we’ll tell you honestly if it’s a repair rather than a replacement.
FAQs

How long should a Jerith shower base or surround last in Florida? A properly installed base and surround typically last 15 to 25 years. In Hialeah, the practical limiting factor is usually the caulk and seal lines, which need attention every few years because of constant humidity. When the base itself is set correctly and the seal is maintained, the panel and base material outlasts the installation around it.
Can I repair a failing Jerith component instead of replacing it? Often yes. A cracked panel, a failed caulk line, or a slow drain is sometimes fixable without replacing the base. But if the leak has reached the subfloor, the honest answer is usually replacement of the base and surround, because a repaired crack over a soft substrate will fail again. We’ll inspect it and give you the real answer, not a sales pitch. Call (888) 836-5914 for an estimate.
How long does a shower base and surround replacement take? The demolition and replacement of a base and surround is typically a two- to three-day job for a standard alcove, longer if the subfloor needs work or the drain has to be relocated. We give you a start-to-finish schedule in writing before work begins. Call us for a written estimate and we’ll scope it correctly.
How do you source the Jerith-compatible part? We source through the manufacturer and vetted material suppliers, matching your model and field measurements before anything is ordered. If the exact OEM part isn’t available on a timeline that works, we’ll show you a quality aftermarket equivalent with the measured dimensions next to it. We don’t order on model number alone; we order on measurement. Call (888) 836-5914 for the written quote.
We also work with KraftMaid, Cambria, and Silestone on the rest of the bathroom, so finish and fixture choices stay consistent when the repair grows into a larger project. Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Jerith.
If you’ve found the failed part, you’re already ahead of most Hialeah homeowners. The next step is having it measured and priced in writing. Call Rowan Construction Group Hialeah at (888) 836-5914 to schedule your free estimate and a free second opinion on any written quote you already have; estimates and the review are both free, and the workmanship is covered under our 365-Day Done Right Promise.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












