A Rowan company - serving Hialeah, FL
A living room with a wall of new windows and a sliding glass door
C
CWS · Hialeah

CWS Home Additions & ADU in Hialeah, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Hialeah
A new casement window over a kitchen sink
A new multi-panel patio door opening a kitchen to the patio
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Home Additions & ADU: The Hialeah Owner’s Guide

We build and finish CWS-compatible home additions and ADUs for Hialeah homeowners, and the installed range runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached ADU, quoted as a flat written price before any work starts. Rowan Construction Group Hialeah is an independent contractor and is not affiliated with CWS; we work with the brand, not for it. Where a CWS system has failed, the discovery is rarely dramatic. A homeowner in Hialeah notices a hairline crack tracking up the block wall by the new doorway, a door that won’t latch square, or a musty smell in the converted garage after a week of August rain. Those are the moments this page is written for: the structure moved, the seal opened, and the part of the build that was supposed to be permanent isn’t behaving that way.

Call (888) 836-5914

Which CWS Models This Applies To

A new front entry door with glass sidelights

CWS builds modular and panelized addition systems, and the pieces that matter to a repair are rarely the whole unit. They’re the connectors: the tie plates that marry new framing to the existing house, the header assemblies over the new opening, the foundation anchors, and the weather-seal flashing at the roof-to-wall junction. Those are the parts that fail first, and they’re the parts you’ll be matching.

To identify what you have, look for the stamped label on the panel edge or the tie plate itself, usually a series and gauge code. Measure the plate length and bolt spacing; a CWS tie set from one series will not fit the next. Record the wall thickness and the anchor embedment depth you can see. That information decides whether an OEM replacement is the honest answer or whether a quality aftermarket equivalent meets the same load rating for less. For CWS specifically, we lean OEM on structural connectors and accept aftermarket on the flashing and trim, where the spec is simpler to verify. If a previous owner changed a panel, the label may not match what’s actually installed, and the measurement wins over the stamp every time. Bring us a photo of the label and a tape measure reading and we’ll tell you what you’re looking at.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Home Additions & ADU Is Failing

  • Cracks at the wall-to-addition joint. Differential settlement between the new footing and the original house pulls the joint apart. A crack wider at the top than the bottom usually means the anchor or tie plate has loosened.
  • Doors and windows that no longer latch square. The frame has racked. In Hialeah’s humidity and summer heave, a panel that shifted a quarter inch over one wet season will show here first.
  • Water staining at the roof-to-wall flashing. The flashing seal has opened and rain is tracking behind it. Left through a rainy season, that becomes rot in the header and the sheathing behind it.
  • A musty smell or soft drywall in a converted garage. Moisture is getting in at the slab or the threshold and has nowhere to dry. The garage conversion in Hialeah is where we see this most, because the original slab was never poured to live behind.
  • Visible rust on tie plates or anchors. Coastal air and interior moisture corrode unprotected steel, and a corroded connector loses its rated capacity quietly. It’s the failure that shows no symptom until it matters.

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

For Hialeah, a targeted repair to a CWS addition’s connectors, flashing, or a header assembly typically runs $1,800 – $6,500 depending on how much finish has to come out to reach it. A full structural refit of the addition, including re-anchoring and re-flashing, lands in the $8,000 – $24,000 range. Those numbers sit inside the broader $45,000 – $130,000 you’d pay for a new addition, which is why owners repair before they rebuild.

What drives the range is access: tile, drywall, and stucco have to come off to reach a tie plate, and they have to go back. We quote the repair, the finish restoration, and the parts as separate lines so you can see what the hardware costs and what the labor costs. The written warranty on the work is spelled out in the quote, not promised verbally.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check the obvious: photograph the label, measure the tie plates, look for staining at the roof line, and test a door for square with a level. That’s inspection, and it protects you.

Where DIY goes wrong here is structural. Re-anchoring an addition or resetting a header means knowing load paths and the right fastener for the substrate, and a wrong call doesn’t fail immediately; it fails slowly, over seasons. This is work for a trained professional. If your CWS addition is showing any of the signs above, get it looked at. Call (888) 836-5914 and we’ll send a background-checked, uniformed technician who leaves a documented photo record of what was found, plus a written price before anything starts. Estimates are free.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

Get Your Written Price

We finish and repair CWS additions across Hialeah, and every job starts with a written price before anyone picks up a tool. If your addition is cracking, leaking, or shifting, call (888) 836-5914 for a free estimate and a free second opinion on any quote you already have. Other brands we also work with include KraftMaid, Cambria, and Silestone. Every visit includes a documented photo record and a written warranty, and the 365-Day Done Right Promise covers the work. Bring a photo of your CWS label and we’ll get you a number you can compare.

Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front yard fence with a matching gateA new paver pool deckAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashing

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Hialeah

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Hialeah team

A local vetted partner works across Hialeah and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 836-5914
Local Service Coverage

Request a Free Estimate in Hialeah

Tell us what you need - Rowan Construction Group Hialeah responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch