A Rowan company - serving Hialeah, FL
A living room with a wall of new windows and a sliding glass door
CGI · Brownsville, FL

CGI Construction in Brownsville, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Hialeah
New double-hung windows in a dining room
A new front entry door with glass sidelights
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Construction in Brownsville, FL

We provide independent CGI construction and installation service across Brownsville, from impact window retrofits in 1950s concrete-block homes to full replacement of corroded sliding doors. What sets our CGI work apart here is the starting point: many Brownsville properties carry unpermitted legacy additions, so we verify framing, flashing, and code compliance before a single unit goes in. The CGI products we work with are engineered for Miami-Dade’s high-velocity hurricane zone, and the difference between a clean install and a leak is in the details. Call (888) 836-5914 to schedule your free estimate.

Call (888) 836-5914

Why Brownsville Residents Choose Us for CGI Service

A new casement window over a kitchen sink

CGI’s impact lines – the Impact Series, the Sentinel Series for windows, the StormGuard Series for sliding glass doors – are built to the same engineering standards whether they go into a new build or an older CBS wall. But the wall is where installs succeed or fail. Older Brownsville homes have block walls with decades of patchwork stucco, and some have openings that were never properly flashed to begin with.

That’s the knowledge our technicians bring, drawing on crews with up to 19 years in the field. We’re an independent CGI service provider, not affiliated with or authorized by the manufacturer, so our approach is straightforward: use genuine CGI OEM parts for glass, locks, and weather seals where warranty and performance require them, and source quality aftermarket hardware where it makes better sense. You get a written flat price before work starts, background-checked and uniformed technicians, and a photo record of the opening conditions and the completed install on every visit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CGI Construction Problems We Solve in Brownsville

  • Failed seals and gaskets on impact windows. Years of intense South Florida UV and salt air break down weather seals, and the water intrusion often doesn’t show up until you see a stain spreading across interior stucco. Brownsville’s heavy summer rain turns a failed seal into a wall-cavity problem fast.
  • Corroded aluminum frames and hardware. Salt-laden air eats into finishes, especially on older installs that didn’t use proper coastal-grade coatings. When the frame is compromised, the impact rating is compromised too, and full replacement becomes the honest answer.
  • Improper flashing and anchoring on retrofits. The number one reason we see leaks after hurricane season is a window that was anchored into CBS block without flashing detailed correctly. The unit can be fine; the opening isn’t.
  • Unpermitted CGI products in converted openings. Carports turned into living space, jalousie windows swapped for impact units without permit or Miami-Dade NOA documentation – we see this constantly in Brownsville and help restore code compliance.
  • Jalousie-window openings and non-compliant egress. 1960s openings weren’t sized or framed for modern impact units. We assess the rough opening and structural condition before recommending what product fits.

CGI Service in Brownsville: What Local Conditions Mean for Your Equipment

Brownsville (33142) is one of the few neighborhoods in Miami-Dade’s urban core where contractors routinely pull apart an exterior wall and find an addition that was never permitted. The housing stock – 1940s through 1970s single-story concrete-block and CBS homes, many with wood-frame and jalousie-window additions, flat or low-pitch roofs – has been patched, expanded, and rebuilt after storms for decades. For CGI window and door owners, this means a replacement job can quickly reveal that the original unit sits in an opening that doesn’t meet current Miami-Dade impact or egress code. That’s not a reason to walk away from the project, but it is a reason to plan for permitting and possible framing remediation before the install begins. Tight side setbacks and small infill lots add a practical wrinkle too: staging materials and pulling old units out of a narrow side yard takes planning.

CGI Models & Products We Service in Brownsville

We work across the CGI product lines: the Impact Series (hurricane-rated windows and doors), the Sentinel Series (impact windows), the StormGuard Series (impact sliding glass doors), and the Classic Series (non-impact windows and doors). For each job, our approach on parts is deliberate. Impact glass, locking mechanisms, and weather seals are sourced as genuine CGI OEM parts to preserve warranty coverage and rated performance. Non-structural hardware – handles, hinges, trim pieces – can often use high-quality aftermarket equivalents at a lower cost, provided the part is verified against Miami-Dade NOA compliance. We don’t claim local warehouse stock; parts are ordered per job, and the written quote spells out exactly what’s specified and why.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Service Pricing in Brownsville

Installers setting a new window and checking it for level

Here’s what CGI work typically costs in Brownsville, in dollars you can screenshot and compare:

Service Typical Range
Impact Window Installation $8,000 – $25,000
Window Replacement $4,500 – $15,000

What drives cost on a Brownsville job: the number and size of units, whether the existing openings need reframing to meet impact code, the condition of the CBS block and stucco around each opening, and whether permits are required for a previously unpermitted addition. Your free estimate includes a written flat price, a written scope, and a written warranty – and no work proceeds on a change until the change order is signed. Bring us a competitor’s written estimate and we’ll review it line by line at no charge. Call (888) 836-5914 for an exact quote.

Serving Brownsville, FL – Our Local Coverage Area

We serve Brownsville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – CGI Construction in Brownsville

Service Areas Near Brownsville

We work throughout Brownsville (33142) and the surrounding neighborhoods: Hialeah, Miami Springs, Opa-locka, Westview, West Little River, and Gladeview. Our Brownsville service area covers both residential and investor-owned properties. If you’re in Miami proper or just over the county line, our CGI service reaches you too.

Book Your CGI Service in Brownsville Today

Every CGI install in Brownsville gets a written flat price before work starts, a documented photo record when the crew leaves, and the 365-Day Done Right Promise – if it’s not done right, we make it right. Free second opinion on any written estimate you already have. Call (888) 836-5914 to schedule your free estimate.

Written by the team at Rowan Construction Group Hialeah.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A single-story rear room addition with tall windows and a new patioA new clay tile roofA new front yard fence with a matching gateA new paver pool deckA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seat

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Hialeah

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Hialeah team

A local vetted partner works across Hialeah and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Brownsville? Licensed & insured · free written estimates
Call (888) 836-5914
Local Service Coverage

Request a Free Estimate in Brownsville

Tell us what you need - Rowan Construction Group Hialeah responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch