A Rowan company - serving Hialeah, FL
A living room with a wall of new windows and a sliding glass door
CGI · Hialeah

CGI Windows & Doors in Hialeah, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Hialeah
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Windows & Doors: The Hialeah Owner’s Guide

We install CGI-compatible windows and doors throughout Hialeah, and most full window replacement runs $4,500 – $15,000, with impact-rated installations at $8,000 – $25,000. A single failed unit, sash, or hardware set is usually a smaller job than that headline number suggests, and the right fix depends on which CGI series you own. Most Hialeah owners discover the problem the same way: a window that won’t latch flush before a storm, fog between the panes that never clears, or a door that drags on the sill after a humid summer. We’re an independent service provider, not affiliated with CGI, so our quote reflects what your actual unit needs rather than a manufacturer’s replacement script.

Call (888) 836-5914

Which CGI Models This Applies To

New double-hung windows in a dining room

CGI makes a broad lineup of aluminum and vinyl windows and doors, and the part you need is matched to the series, not the brand name alone. Before anything gets ordered, we identify the unit by its label: the etched or stickered data plate in the frame channel usually carries the series, the glass spec, and a manufacturer code. From there we measure the rough opening and the visible glass, because a sash or balance from one series won’t seat in another even when the frame dimensions look identical.

The OEM-versus-aftermarket decision matters more for CGI than for many brands. Factory parts guarantee a fit but can carry a longer lead time and a higher unit price. A quality aftermarket balance, weatherstrip, or roller often matches the original spec for less. What we won’t do is force a universal part into a CGI frame and call it done, because the seal tolerance on these units is tighter than it looks. On doors, the hinge and threshold hardware is the usual mismatch point. If you’re also sourcing cabinetry, countertops, or fixtures from KraftMaid, Cambria, or Silestone during the same project, we can coordinate the timeline so the window and door work doesn’t hold up the rest.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Windows & Doors Is Failing

  • Fog or condensation sealed between the panes. The insulated glass unit’s seal has failed, letting moisture into the air space. It won’t dry out on its own, and cleaning the inside of the glass is impossible.
  • A window that won’t stay up or slams down. The balance spring or block has worn out or detached from the sash. This is the most common single-part failure on CGI vertical sliders and hung windows.
  • A door that drags or won’t latch. Humidity swells the frame or the threshold hardware shifts, throwing the door out of square. Hialeah’s wet season accelerates this, and left alone it wears the seals and the hinges.
  • Drafts or water staining at the perimeter. The weatherstrip or glazing gasket has compressed or cracked, breaking the seal against wind-driven rain. In a coastal Florida climate that gap shows up fast during storm season.
  • Cloudy or degraded frames and rollers. Sun exposure breaks down vinyl surfaces and door track rollers over time. A sticky slider is usually rollers, not the frame, and it’s a fixable part.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

Here’s the honest range for Hialeah, with dollars attached so you can compare before you call:

  • Window replacement (whole-unit, standard): $4,500 – $15,000
  • Impact-rated window installation: $8,000 – $25,000
  • Single-unit repair, sash, balance, or hardware: quoted line by line before work starts

What drives the number: how many units, whether the frame is sound or needs reframing, glass spec (impact versus standard), and access if the opening sits above the first floor. Every quote is a flat written price with a written scope and written warranty before anyone picks up a tool. Parts and labor are broken out so you see where the money goes, and no change proceeds without a signed change order. Our technicians have up to 19 years of experience, and the 365-Day Done Right Promise covers the work: if it’s not right, we make it right.

DIY or Call Us?

Some checks are safe for anyone. You can measure the visible glass and rough opening, look for the data plate, note whether the sash moves freely, and photograph the fog or the gap. What goes wrong with DIY on doors and upper-floor windows is the risk of working at height or over-tightening hardware into a frame you can’t easily replace. A door that needs rehanging, or a window on a second story, is where we’d stop you: we don’t hand out step-by-step instructions for work that can injure someone, and we’d rather inspect it ourselves. A stuck balance or a bad gasket is a small, honest fix, and we’ll tell you if that’s all it is. Call (888) 836-5914 and we’ll price it in writing.

FAQs

A new wood side gate with black hardware

How long does a CGI window or door unit last in Hialeah? Most CGI units last roughly 20 to 30 years, but Hialeah’s salt air, humidity, and sun wear seals and hardware faster, so expect balance, weatherstrip, and roller parts to need attention sooner than the frame itself.

Can it be repaired instead of replaced? Often, yes. A failed balance, gasket, or roller is a parts fix, while a blown glass seal or a warped frame usually means replacing the unit. We’ll tell you which one you’re looking at before quoting. Call (888) 836-5914 for a free estimate.

How long does the swap take? A hardware or sash repair is often a single visit, and a full unit replacement is a scheduled job sized to the opening and access, not an emergency call. We confirm timing in writing before work starts.

How do you source the part? We identify your CGI series from the data plate and rough-opening measurements, then match an OEM or quality aftermarket part to the spec. We don’t claim to carry parts on a truck or keep them in stock; we source what your unit actually needs. Call (888) 836-5914 for a free estimate.

Call Rowan Construction Group Hialeah at (888) 836-5914 for a free estimate on your CGI windows and doors work. Every quote is a flat written price with a written scope and written warranty before any work begins, backed by the 365-Day Done Right Promise – and if you have a competitor’s written quote, we’ll review it line by line at no charge.

Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porchA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Hialeah

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Hialeah team

A local vetted partner works across Hialeah and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 836-5914
Local Service Coverage

Request a Free Estimate in Hialeah

Tell us what you need - Rowan Construction Group Hialeah responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch