







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Home Additions & ADU: The Hialeah Owner’s Guide
We build and finish Boxabl-compatible home additions and ADUs in Hialeah, with installed projects typically landing between $45,000 and $130,000 for an addition and $90,000 to $220,000 for a full ADU. If you’re landing on this page because something on your Boxabl unit has failed (a wall panel that won’t seat, a connection plate that’s pulling, a finish that’s lifted), we can assess it and give you a flat written price before any work starts. Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Boxabl.
Most Hialeah owners discover the problem the same way: a hairline gap opens along a panel seam after a wet season, a door in the addition stops latching square, or a contractor doing an unrelated job points at corrosion on a tie and tells you to get it looked at. Boxabl’s Casita is a steel-framed, panelized structure, and what fails first in South Florida is almost never the steel. It’s the connections, the sealants, and the finishes around them.
Key Takeaways
- Installed addition work in Hialeah runs $45,000 to $130,000; a full ADU runs $90,000 to $220,000.
- Failure in a Boxabl structure is usually at the seams, ties and sealant lines, not the frame.
- We quote a flat written price with a written scope before work starts. No change proceeds without a signed change order.
- Every visit includes a documented photo record of what we found and what we did.
Which Boxabl Models This Applies To

Boxabl’s product line centers on the Casita, a roughly 361-square-foot fold-out unit built on a steel chassis with a panelized wall system. The company has talked publicly about other configurations, so the honest first step is confirming what you actually own rather than assuming. Look for the data plate or identification label on the unit (often near the entry frame or chassis) and note the model designation and dimensions. Measure the interior wall-to-wall in both directions. If you’re adding onto the unit rather than repairing it, those measurements decide which panel and finish profiles are compatible.
On the OEM-versus-aftermarket question: Boxabl’s own replacement parts are the safe match when they’re available, because panel and connection geometry is proprietary. Where an OEM part is unavailable or on a long lead time, quality aftermarket equivalents exist for fasteners, sealants, flashing profiles and finish trim, and a good contractor will tell you plainly which items can be substituted and which cannot. Structural connection hardware is in the second category: it has to match the engineering, not just the hole pattern. For interior finishes on an addition, brands like KraftMaid, Cambria and Silestone are common upgrade paths, and those are standard cabinetry and surface lines, not Boxabl-specific parts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Home Additions & ADU Is Failing
- Gaps or separation at panel seams. Sealant and flashing at the joints take the weather load, and in Hialeah’s wet season with driving rain, a failed seal lets water track behind the panel. If you can see daylight or feel air movement at a seam, the joint has opened.
- Corrosion or staining at connection plates and ties. Steel-framed structures need proper isolation between dissimilar metals and a maintained coating. White or orange staining at a tie is the visible sign that the protective layer is gone.
- A door or window that no longer sits square. When an addition settles or a connection loosens, the opening racks slightly and the hardware stops lining up. It’s an early indicator, not a cosmetic issue.
- Soft spots or lifting at floor and wall finishes. Moisture behind a panel shows up as a lifted edge, a stain, or a soft patch in flooring. In Hialeah humidity, this is often the first interior symptom an owner notices.
- Roof-to-wall transition leaks. The junction where the addition roof meets the existing structure is the most common leak point on any addition, and it needs a proper flashing detail rather than caulk alone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Hialeah, plan on $45,000 to $130,000 for a home addition and $90,000 to $220,000 for a full ADU, installed. What moves the number: square footage, whether the addition shares a wall with the main house or stands free, foundation requirements on your lot, impact-rated glazing (required for most new construction here), and finish level. A garage conversion, which is often the leanest path to an ADU, runs $30,000 to $80,000.
We quote parts and labor as one flat written price with a written scope, so you’re not comparing a parts number against a labor number from someone else. Brief repair work, like resealing seams or replacing flashed connections, is priced separately and is usually a fraction of full-addition cost. Under Clause 1 of The Haven Standard, the price is written before anyone starts, and no work proceeds on a change until the change order is signed. Every project carries the 365-Day Done Right Promise, and every visit includes a documented photo record as standard.
DIY or Call Us?
You can safely check and document: photograph the seams and connections, note where stains or gaps are, check that doors and windows operate, and look for lift or softness at floor edges. That record helps any contractor assess faster. Where owners get into trouble is in trying to reseal a structural joint, re-torque connection hardware, or pull a panel to inspect behind it. Those steps interact with the load path of a steel-framed structure, and getting the flashing and isolation details wrong is how a small leak becomes a wall rebuild. Panelized connection work is not a homeowner repair.
If you’d rather have it looked at properly, call (888) 836-5914 and we’ll schedule an assessment. A written price comes before any work, and if you already have a competitor’s quote, we’ll review it line by line at no charge through our Free Second Opinion offer.
FAQs

How long does a Boxabl addition or ADU last? The steel frame itself is a long-life component, but the sealants, flashing and finishes around it are the wear items, and in Hialeah’s heat and rain they need inspection every few years. Lifespan is really about maintaining the joints, not the structure.
Can it be repaired instead of replaced? Often, yes. Sealant and flashing failures, finish lift and hardware realignment are repair items, and a proper repair is far cheaper than any rebuild. Structural connection damage is case by case, and we’ll tell you plainly which category you’re in after an assessment. Call (888) 836-5914 for a free estimate.
How long does the work take? A targeted repair visit is typically a day or two. A full addition or ADU is a multi-week project scheduled around permits and inspections, and the written scope states the timeline before work begins.
How do you source the part? We confirm your exact unit and the failing component first, then match OEM where geometry requires it and specify a quality aftermarket equivalent where substitution is safe, with the choice written into the scope. Permits are pulled and inspections passed. Call (888) 836-5914 for an exact quote on your Hialeah property.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












