







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Hialeah Owner’s Guide
If a Boral window or door in your Hialeah home has fogged glass, a dragging sash, or a latch that no longer catches, we install Boral-compatible replacement units across South Florida’s high-wind zones. Full replacement units typically run $4500 – $15000 for a standard window project and $8000 – $25000 when impact-rated Boral impact windows are specified, with the written price issued before anything is ordered. Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Boral.
Owners usually find the failure the same way. The seam between the insulated glass unit’s two panes clouds up after a rainstorm, so the view of the palmetto trees outside goes soft at the edges. Or the sliding patio door starts jumping its track near the latch side, and you feel it in your shoulder before you see it. We inspect every unit we quote and send a documented photo record of what we found, so the conversation starts from evidence instead of a suggestion.
Which Boral Models This Applies To

Boral’s residential line is wide, and the part you need depends on the series, the frame material, and the year the unit was made. The most common residential families are vinyl single-hung and horizontal slider replacements, aluminum-framed units, and impact-rated insulated glass. Identifying yours takes two measurements and one label: a permanent etched label or a sticker in the header channel or side jamb that carries the model, size code, and glass designation. If the label is gone, measure the rough opening at three points for width (top, middle, bottom) and two for height (left, right). Boral windows are measured in fractions of an inch; a quarter-inch error and the new unit will not square into the existing opening.
The OEM-versus-aftermarket decision matters more with Boral than with most brands. Factory replacements match the existing sash profile and lock hardware exactly, which keeps operation quiet and lets the existing screen fit. A quality aftermarket equivalent from a manufacturer that produces to the same rough-opening spec can cost less and still carry a high-wind rating, but the latch, screen channel, and weatherstripping have to be cross-checked against the frame you have. We quote both paths with a line-item price so the choice is yours, not ours.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
- Fogging or a cloudy haze between panes. The insulated glass seal has broken and moisture has entered the air gap. It looks like a film on the glass because it is – it is inside the unit, where no glass cleaner will reach it.
- Dragging sashes or a door that will not close flush. The track is out of level, the rollers are worn, or the frame has shifted from Hialeah’s seasonal ground movement. A door that sticks in dry weather and closes fine after rain is telling you the frame is moving, not the door.
- Water intrusion at the sill or a damp interior wall. The weep holes are clogged, or the sill sealant and flashing have failed. In Hialeah’s summer downpours this shows up indoors as a stain under the frame, not at the frame itself.
- A latch, handle, or lock that no longer engages. The keeper has shifted, the hardware has worn, or the frame has racked. This is a hardware fix most of the time, not a full unit replacement.
- Visible condensation on the interior of the glass during humid days. The unit’s seal and thermal break have degraded. This is the earliest sign Boral windows fail, and it is usually caught a year or two before the glass fogs completely.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Hialeah, written before any work starts:
| Project | Installed Price |
|---|---|
| Impact window installation (Boral-compatible, high-wind rated) | $8000 – $25000 |
| Standard window replacement | $4500 – $15000 |
What drives the range: the number of units, whether impact-rated glass is required by Florida wind-borne debris code in your zone, the frame material, and whether the existing opening needs repair before the new unit goes in. We name each line item, install to the manufacturer’s rough-opening spec, and pull permits where they are required so inspection passes on the first walk. The work carries the 365-Day Done Right Promise, so if something is not done right, we make it right.
DIY or Call Us?
A few things you can safely check yourself. Wipe the track and clean the weep holes at the bottom of the sill with a thin tool, because a clogged drain path is the easiest fix in the book. Confirm the unit closes square by holding a level against the frame and checking with a flashlight for daylight at the corners. Re-seat a loose lock keeper if the screws are accessible.
What goes wrong for owners is glass replacement and frame work in a high-wind zone. A replacement unit that is not rated for the wind zone, or that is set without the correct flashing and sealant, can leak in a storm or fail inspection. That repair is not a weekend job, and the numbers above get worse when a bad install has to be torn out first. Call (888) 836-5914 and we will inspect the unit and give you a written price.
FAQs

Expect 20 to 25 years from a well-installed Boral vinyl or aluminum unit in a typical home, but Hialeah’s humidity and salt-laden air off the bay shorten the life of seals and hardware, often to 15 years. The insulated glass seal is usually the first thing to go, and that is the fog you cannot wipe off. Call (888) 836-5914 for an inspection before you assume the whole window needs replacing.
Sometimes. A broken lock, worn roller, or clogged weep hole is a repair. A fogged insulated glass unit or a frame that has lost its wind rating is a replacement, because the sealed assembly cannot be repaired in place. We quote the repair first when it is the honest answer.
A standard window replacement is a one- to two-day job for a handful of units, and a full-house impact window project runs three to five days. Permits and inspection add time, and we tell you the schedule in the written scope before we start. Call (888) 836-5914 to get a date on the calendar.
We measure the rough opening and match the model and wind rating to your existing frame, then order through a vetted supplier. We tell you the lead time in the written quote and confirm it before you sign. If you have a quote from another contractor, we will review it line by line for free.
If your Boral window or door is fogging, sticking, or leaking, call (888) 836-5914 for a free estimate. We answer calls 24/7 with a live person, and every visit includes a documented photo record of what we found. We also work with KraftMaid, Cambria, and Silestone on the interior side of the same projects.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












