







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Hialeah Owner’s Guide
We install Boral product assemblies and replacement components across full kitchen remodels in Hialeah, and the typical installed kitchen remodel runs $14,000 to $45,000 depending on scope. If you have a specific Boral component that has failed or is on its way out, an individual replacement is far cheaper than a full remodel, and we’ll give you the written number before anything gets ordered. No work starts until you’ve got a flat price and a written scope in hand.
Most owners discover the problem slowly. A caulk line along a counter that keeps opening up after every reseal. A backsplash grout joint that darkens and stays dark. A cabinet run that no longer sits flush against the wall after a humid summer. By the time it’s obvious, the water has usually been working behind the finish for a while. In Hialeah’s climate that timeline runs faster than most of the country, and the earlier you catch it the less it costs.
Which Boral Models This Applies To

Boral makes material systems rather than a single numbered appliance, so “which model” for a kitchen usually means identifying the specific product line inside your kitchen. The common ones in Hialeah homes are Boral engineered stone and quartz surfacing on counters, Boral trim and moulding profiles around cabinetry and soffits, and Boral’s exterior cladding products that sometimes show up on lanai-adjacent kitchen walls after a remodel. Identification starts with the original spec sheet or invoice if you kept it. If not, look for a stamped or printed name on the underside of counter overhangs, on the back edge of trim stock, or on the packaging label a prior installer left behind.
Where it gets tricky: Boral trim profiles are sold by profile number and nominal dimension, and a 5/8-inch versus 3/4-inch depth changes how a replacement seats against existing cabinetry. Measure before you order, not after. On the counter side, engineered stone slabs are sold by the slab, not the square foot, so a repair that touches one seam may still require a full-slab conversation if the original colorway is discontinued. For the OEM-versus-aftermarket call: on trim and moulding, a quality equivalent profile is fine and often cheaper. On engineered stone colorways, matching the original mill lot is the only way to get a true seam blend, and we’ll tell you honestly when it isn’t possible.
For reference, we also work with KraftMaid, Cambria, and Silestone across our Hialeah kitchen projects. Rowan Construction Group Hialeah is an independent contractor and is not affiliated with Boral.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Kitchen Remodeling Is Failing
Here’s what actually shows up when we open up a kitchen in Hialeah and the surrounding neighborhoods:
- Grout cracking along a backsplash joint, repeatedly. Usually movement between the wall and the counter, not the grout itself. In Hialeah’s humidity and heat cycling, a rigid joint with no movement accommodation will crack within a season or two.
- Caulk failure at the counter-to-wall seam. The caulk pulls away, re-caulking holds for a few months, then it opens again. That pattern points to substrate movement rather than a bad caulk product.
- Trim separating from cabinetry or soffit. Boral trim is dimensionally stable, but the substrate behind it isn’t always. If the gap opens seasonally, the fastener pattern or the backing material needs attention.
- Dark or soft spots at the base of a counter run or cabinet toe kick. This is water tracking behind the finish, typically from a sink seal or a lanai wall. By the time it’s visible at the surface, it’s been there a while.
- Counter seam shadowing or a visible line at a joint. Engineered stone seams that were set with the wrong adhesive or without color-matched fill will telegraph over time. It’s cosmetic until it isn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the work around a failed Boral kitchen component in Hialeah breaks down like this. These are the ranges we quote, and they’re the same numbers you’ll see on any written estimate from us:
| Scope | Installed Range |
|---|---|
| Kitchen remodel (full) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: slab availability if the colorway is discontinued, whether the substrate needs repair behind the finish, and whether the trim run has to be custom-profiled. Your quote is a flat price with a written scope – materials and labor itemized – and no change proceeds without a signed change order. Workmanship is covered under our 365-Day Done Right Promise.
DIY or Call Us?
Some things you can check safely. Measure the gap at a separating trim joint. Photograph the caulk failure and note how often it recurs. Look under the sink for moisture and note any softness at the cabinet base. Those observations help us quote accurately and cost you nothing.
What goes wrong on a DIY attempt: re-caulking a seam that’s moving without addressing the movement just delays the next failure. Cutting into engineered stone to remove a seam without the right tooling will crack the slab, and that turns a seam repair into a countertop replacement at $2,000 to $6,500 installed. Setting Boral trim to an uneven substrate without correcting the substrate produces the same seasonal gap within a year. If you’re unsure which of these you’re looking at, call us at (888) 836-5914 and we’ll tell you straight. The estimate is free, and so is a second opinion on any written estimate you already have from another contractor.
FAQs

Boral engineered stone and trim products are built to last decades under normal conditions, but the failures we see in Hialeah come from moisture and heat cycling rather than from the product itself. Improperly sealed seams and joints that don’t accommodate movement are where the breakdown starts. Call (888) 836-5914 for an assessment of what you actually have.
Often yes – caulk and grout failures on a Boral surface can frequently be corrected by fixing the movement underneath, not just re-sealing the surface. Whether it’s a repair or a replacement depends on what the substrate looks like once we open it up. We’ll tell you which one it is before any work starts. Call (888) 836-5914 for a free estimate.
A single trim or seam repair is typically a one-day job; a countertop replacement runs longer and depends on slab lead time. We give you a realistic schedule in the written scope, not a guess on the phone. Call (888) 836-5914 to schedule your free estimate.
We source through our network of vetted material suppliers, and we’ll confirm the specific Boral product line and current availability before we commit to a price. If the original colorway or profile is no longer produced, we’ll tell you that up front and walk through the matching options. Call (888) 836-5914 – estimates are free, and you’ll get a written price before we order anything.
If your Boral kitchen component is failing, the first step is a free estimate with a written price and a written scope – no guesswork, no “call for a quote.” Call (888) 836-5914 to schedule yours. We serve Hialeah and nearby areas across kitchen remodeling and six other trades, and we’re happy to review a competitor’s written estimate line by line at no charge.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












