







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The Hialeah Owner’s Guide
We build and finish Barrette-compatible home additions and ADUs for Hialeah homeowners, and the installed price range here runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU, quoted as a flat written price before any work begins. Rowan Construction Group Hialeah is an independent contractor and is not affiliated with Barrette. When owners call us, it’s usually because something at the seam has already gone wrong: a sliding door that won’t track straight, a wall junction that’s pulling away, or a permit that was never closed and now blocks the refinance.
Barrette’s structural and exterior product line shows up in a lot of Hialeah additions built between 2015 and 2025, and the failure pattern depends entirely on how the addition met the original house.
Which Barrette Models This Applies To

Barrette’s catalog covers more than fencing. For additions and ADUs, the Barrette components we’re called to work around are the structural connectors and framing hardware, the exterior railing and column systems, and the gate and threshold hardware on the addition’s exterior access. Identifying the exact part starts with the label: Barrette stamps a model or series code on the connector plate, the hinge barrel, or a foil tag inside the railing post. If that tag is painted over, we pull dimensions instead and match to the current spec sheet (post spacing, plate gauge, hole pattern).
The OEM-versus-aftermarket decision matters here. Barrette’s connectors are hot-dip galvanized to specific gauges, and on a Florida addition exposed to salt-laden air, gauge and coating are not interchangeable. A cheaper aftermarket plate with a thinner zinc coat on a Hialeah addition near the coast is a corrosion problem in three to five years, not fifteen. When an exact Barrette match is unavailable, we say so, and we quote the equivalent spec by number rather than a vague “similar.”
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
- Railing posts that shift under hand pressure. The base plate or anchor has loosened, usually because the original fasteners went into the wrong substrate or the galvanized coating failed and the bolt corroded.
- Sliding access door that jumps its track. A worn roller or a bent Barrette track section, common on additions where the door was reused from the original build.
- Visible rust bleeding along a connector or hinge plate. Coating breakdown, faster in Hialeah’s humidity than in drier markets.
- Roof-to-wall seam pulling open. Flashing or connector failure where the addition tied to the original structure, letting water in behind the stucco.
- Gate or threshold hardware that won’t latch consistently. A sagging post or a hinge that’s bent out of spec.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for a Hialeah owner, parts plus labor, transparency included:
| Scope | Installed range (Hialeah) |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the number: footprint and foundation type, whether you’re tying into an existing slab or pouring new, the exterior finish (stucco and impact glazing push it up), permit and inspection fees, and how much structural retrofitting the existing house needs at the connection. We quote a flat price with a written scope and a written warranty before anyone picks up a tool, so the parts and labor line items are yours to review. Every visit includes a documented photo record of what we found and what we did.
DIY or Call Us?
An owner can safely check a lot of this: test the railing posts by hand, look for rust stains at the connector plates, photograph the model tag inside the railing post, and confirm which permits were pulled on the original addition. What we don’t recommend is resetting a structural connector, re-flashing a roof seam, or repairing a sliding door track on a load-bearing wall. Those carry real risk of water intrusion and, at worst, a structural failure, and they’re the reason we pull permits and get each inspection signed off. Call (888) 836-5914 and we’ll schedule your free estimate.
FAQs

How long does a Barrette component on a Hialeah addition last? A properly galvanized connector in a Hialeah addition holds up 15 to 25 years inland, shorter near the coast where salt air accelerates corrosion. Inspect the plates every few years.
Can it be repaired instead of replaced? Sometimes. A loose anchor or a single corroded bolt can often be re-set, but a failed connector at a load path needs replacement, and we’ll tell you which it is in writing.
How long does the swap take? A single hardware or connector replacement is often a few hours; a full addition or ADU scope runs weeks to months. We’ll give you the timeline with the quote.
How do you source the part? We match the Barrette model tag or dimensions to the current spec sheet and quote the exact gauge and coating, not a generic substitute. If the OEM part is discontinued, we say so.
Call (888) 836-5914 for a free estimate. We also work with KraftMaid, Cambria, and Silestone throughout Hialeah projects, and every Rowan job carries the 365-Day Done Right Promise, a written price before work starts, and a free second opinion on any competitor’s estimate. Bring your Barrette part tag or a photo of the failure – we’ll review it line by line at no charge. Rowan has completed 4,000-plus projects with a written price and a documented record on every one.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












