







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The Hialeah Owner’s Guide
We install and remodel American Standard-compatible kitchens in Hialeah, and a full kitchen remodel here typically runs $14,000 – $45,000 installed, with a written flat price before any work starts. Smaller updates like cabinet installation ($4,000 – $13,000) or a countertop swap ($2,000 – $6,500) are quoted the same way. Most Hialeah owners don’t wake up planning a remodel because a part failed. They arrive there sideways: the cabinet door that finally came off its hinge was hiding a sagging box, the faucet that dripped through every Miami-Dade wet season left a soft spot under the sink, or the American Standard fixture they inherited from a previous owner no longer lines up with the drain cutout. This page is for that owner, who already knows the brand and needs honest numbers before making a call.
Rowan Construction Group is an independent contractor and is not affiliated with American Standard. We work with the brand’s fixtures every week and know where the fit-and-finish questions hide.
Key takeaways
- A Hialeah kitchen remodel runs $14,000 – $45,000; a smaller kitchen is $9,000 – $20,000.
- AmeriStandard fixtures follow nominal sizing, and that’s where most fit problems start in older Hialeah homes.
- Every job gets a written flat price and a signed change order before work moves ahead.
- Calls are answered by a live person, and every visit ends with a documented photo record.
Which American Standard Models This Applies To

American Standard kitchen products come from a small number of lines, and knowing which line you have tells you what to expect when you renovate around it. Sinks fall into the Americast and stainless lines, and the Americast models – the classic drop-in doubles like the 20- and 33-inch widths – were built to nominal cabinet cutouts that line up cleanly with new KraftMaid or Wellborn boxes. Faucets are the part most likely to stay in a remodel: the Colony and older Reliant lines run a standard 8-inch widespread spread on centers, so you can reuse one only if the deck thickness matches your new countertop.
Here’s the check that saves the most headaches. Before we order anything, we read the model plate or the stamped code on the underside of the sink rim and measure the existing cutout, not the sink exterior. Those two numbers differ by an inch or more on many American Standard models, and a Hialeah homeowner who replaced a sink on the outside dimensions alone ends up recutting a stone top. On cabinet boxes, the giveaway is the door hinge: American Standard doesn’t make cabinets, so if your kitchen has the brand on the sink and faucet only, the cabinetry is a separate brand – and we confirm it by reading the plate inside the door. For the OEM-versus-aftermarket call, an American Standard faucet cartridge or sprayer swap is fine with a quality aftermarket match when the OEM spec is out of production. New American Standard fixtures themselves are worth keeping if the line is current, and not worth chasing when it’s been discontinued.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
These are the signals we see most on Hialeah kitchen visits, what they usually mean, and what they preview for a renovation.
- The sink rocks or pulls from the countertop. The undermount clips have pulled loose, or the deck has swelled from years of a slow faucet leak. In Hialeah’s humidity, the cabinet deck under a hidden leak softens faster than most people expect, which means the fix may reach past the fixture.
- The faucet drips or the sprayer won’t fully retract. The cartridge or the weight-and-hose assembly is worn. American Standard’s ceramic cartridges last well but not forever, and a drip that runs 24/7 during a Miami-Dade wet season noticeably raises the water bill.
- The sink’s finish is blistering or pitting. Americast and stainless coatings break down fastest in homes near the coast or in older buildings with harder water. Pitting that starts small usually means a replacement rather than a touch-up.
- The faucet seat is soft or the base rocks. A compressible deck or a failed gasket lets water sit where the faucet meets the countertop. This is an early sign the countertop or cabinet below may already have taken water.
- The sink no longer matches the cabinet opening. A previous owner installed a replacement that doesn’t line up with the cutout, and the drip rail or seal never closed. That misalignment means a proper remodel, not a patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work actually costs in Hialeah, in installed ranges, so you can compare on a screenshot rather than a phone call.
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves with three things: the size of the kitchen, the countertop material you choose (Cambria and Caesarstone cost more than laminate), and how much plumbing has to move to make the sink and faucet match the existing American Standard footprint. We quote parts and labor separately, line by line, so a homeowner can see what the fixture costs and what the install costs. The 365-Day Done Right Promise covers the work, and every job is finished with a photo record of what we found and what we installed.
DIY or Call Us?
Some of this is safe to check yourself. Turn off the water under the sink, look at the cabinet deck for soft spots or staining, and measure the current cutout. Inspect the model plate so you know what American Standard fixture you’re working with. Those steps cost nothing and tell you a lot.
What moves past a check is where DIY goes wrong. Re-seating an undermount sink, replacing a faucet on a soft deck, or cutting a cabinet or stone top to fit a new American Standard fixture is easy to get wrong, and a small mismeasurement means a cracked countertop. The faucet and the sink are under pressure, and water held in the wrong place behind them does the slow damage a homeowner regrets. Cabinet and stone work is fiddly enough that most people who try it end up paying twice. Call (888) 836-5914 for a free written estimate; we’ll tell you plainly what you can check and what should be left to a crew.
FAQs

An American Standard faucet cartridge typically last five to fifteen years depending on water quality, while a sink can last decades if the finish holds. In Hialeah’s humidity and coastal air, a sink finish often shows early pitting within a decade. The lifespan you actually get depends on what the fixture’s built from and how well it’s installed – call (888) 836-5914 for an honest read on yours.
Yes, in many cases. A faucet cartridge, sprayer, or the sink’s clip assembly can often be repaired rather than replaced if the fixture is still in production. If the sink deck is soft or the finish has failed, a repair is short-lived, and we’ll tell you which path gives you the better outcome. Call (888) 836-5914 and we’ll walk through it.
A faucet or sink swap is usually a half day. A full kitchen remodel in Hialeah typically takes several weeks depending on scope. We’ll put the timeline in writing with the scope so you know what to expect, and no work moves ahead on a change until you sign the change order. Call (888) 836-5914 for a free estimate.
We read the American Standard model plate first, then order the specification that matches your fixture rather than guessing from the sink’s exterior size. We work across more than fifty vetted brands – KraftMaid, Cambria, Silestone and others – and the written price tells you exactly what will be ordered and what it costs. Call (888) 836-5914 for a free estimate.
We’ve put 4,000-plus Hialeah-area projects behind a written flat price and a documented record, so you know what you’re paying before a tool comes off the truck. Ready to get the number in writing? Call (888) 836-5914 for a free estimate, and bring a competitor’s quote if you have one – we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












