







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Home Additions & ADU: The Hialeah Owner’s Guide
We build Jerith-compatible home additions and ADU projects across Hialeah, and most of them land between $45,000 and $130,000 for a home addition, with full ADU construction running $90,000 to $220,000. These are planned builds, not same-day calls, so we quote a flat written price before any work starts and schedule the phases around your permits. We’re an independent contractor, not affiliated with Jerith itself.
Owners in Hialeah usually find a failing Jerith component the same way: a hairline crack opens along a wall-to-ceiling seam in a converted garage, a garden window unit stops latching as the frame shifts, or a screened enclosure panel starts separating after a storm. Those are not cosmetic dents. In Florida’s heat and humidity, a small structural gap in an addition or a failing enclosure assembly lets moisture into the framing envelope, and that is where the real damage starts. Our technicians have up to 19 years of experience reading exactly these symptoms.
Which Jerith Models This Applies To

Jerith makes a range of aluminum and vinyl fencing, railings, and screen enclosure systems, and their components turn up in all kinds of Hialeah additions and ADU projects: screened lanais folded into a room addition, garden-window and panel units set into sunroom walls, and railing systems used around raised patio additions. Because Jerith builds to its own extrusion profiles, a generic aftermarket bracket or panel usually won’t seat cleanly on a Jerith frame. That profile mismatch is the single most common compatibility gotcha we see.
To identify the right part, look for the manufacturer label on the inside of the frame or on the gate post, then measure the actual rail or panel length in inches, not the nominal size stamped on a box. Jerith profiles are typically specified by true extrusion width, and a quarter-inch difference in an aluminum frame member is the difference between a part that fits and one that rattles. On the OEM-versus-aftermarket decision: for load-bearing frames, structural posts, and anything holding glass or screen panels, we source to spec because a wrong-profile rail becomes a safety issue in wind. For cosmetic caps and trim, a quality aftermarket equivalent is often the honest, cheaper choice, and we’ll tell you which is which in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Home Additions & ADU Is Failing
- Vertical hairline cracks at wall-to-ceiling seams in a converted garage or addition. This usually signals settlement or thermal movement in the frame, not paint failure. In Hialeah’s slab-on-grade construction, shifting moisture in the clay-heavy soil is a frequent cause.
- Screen enclosure panels pulling loose or bowing after a storm. Wind pressure typically pops the spline out of the channel before the panel tears. That means the retaining channel or spline has aged out and needs replacement, not just a re-tension.
- Garden window or louvered panel that won’t latch or seal. A frame that has shifted out of square stops the latch from engaging. Left alone, that gap is where Miami-Dade rain gets in.
- Rusted fasteners and white oxidation bloom on aluminum rails. Salt-laden air in Hialeah accelerates corrosion on mismatched or bare-metal fasteners. The fix is usually stainless replacement hardware, not the whole assembly.
- Loose railing sections or posts that rock when you lean on them. This points to compromised post bases or anchor points. It’s a genuine safety failure and shouldn’t wait.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Hialeah, our installed ranges are the honest numbers we quote. A home addition runs $45,000 to $130,000, ADU construction runs $90,000 to $220,000, and a garage conversion to living space runs $30,000 to $80,000. The range is driven by square footage, whether the addition needs a new foundation or slab tie-in, permit and inspection fees, and how much of the existing Jerith enclosure or window system can be reused versus replaced to match current wind-load code.
Every quote is a flat written price with a written scope, delivered before any tool comes out. It separates parts and labor line by line so you can see what the Jerith-spec component costs versus the installation. No change proceeds without a signed change order, which is the discipline that keeps projects within a few percent of the agreed number. The 365-Day Done Right Promise backs the finished work: if it isn’t done right, we make it right. Bring a competitor’s written estimate and we’ll review it line by line at no charge under our Free Second Opinion offer. We also work with KraftMaid, Cambria, and Silestone on the interior finishes these additions often include.
DIY or Call Us?
An owner can safely do the inspecting: photograph the label, measure the component, check for loose fasteners, and note where water is intruding. That’s real, useful information. Where DIY goes wrong on Jerith structures is the structural work. Enclosure frames, load-bearing posts, and anything holding glass or a screen panel in a wind zone are not a weekend job. A mismatched fastener or an improperly anchored post base can fail in a Hialeah squall, and the repair after that costs far more than the original fix. Cutting or re-tensioning an aluminum frame under load can also cause it to snap back and injure you.
The safe path is a documented assessment. We send a background-checked, uniformed technician, photograph what we find, and give you a written price. Call (888) 836-5914 to schedule your free estimate, and bring any competitor quote for a no-charge second opinion.
FAQs

Plan on roughly 10 to 15 years for aluminum enclosure and frame components in South Florida’s salt air and heat, and expect screen spline to age out sooner, often in 5 to 8 years. Fasteners are the first thing to fail if they aren’t stainless. Call (888) 836-5914 for an exact assessment and quote, free.
Often yes, if the damage is cosmetic or limited to spline, fasteners, or trim caps, and we’ll quote the repair honestly rather than push a full replacement. Structural cracks at post bases, shifted frames, and glass-holding members usually call for replacement to meet current code. Call (888) 836-5914 and we’ll tell you which category you’re in.
A single component swap is typically a day of work once the correct part is on site, while a full enclosure section or addition phase takes longer and is scheduled around permits. Our written quote includes the timeline. Call (888) 836-5914 to schedule your free estimate.
We identify the model from the frame label and confirm the true extrusion measurement before ordering, then source the OEM-spec component when structural fit matters. We don’t carry parts on a truck or stock local inventory, so we order to your specific component. Call (888) 836-5914 to start with a documented measurement.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












