







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Hialeah Owner’s Guide
We install and service Therma-Tru-compatible roofing components in Hialeah, and the installed price for the work most owners actually need lands between $400 and $1,800 for repairs and $8,000 to $20,000 for a full roof replacement in this market. When your Therma-Tru roofing assembly fails, you usually find out from a brown water stain spreading across a ceiling, granules collecting in the gutter after a storm, or a soft spot you can feel underfoot on the patio edge. In Hialeah, the discovery almost always follows a summer squall rather than a slow leak, because the region’s afternoon downpours push water sideways against seams that held fine during the dry months. We’re an independent contractor and not affiliated with Therma-Tru; we work with the brand’s components and the compatible parts that match them.
Key Takeaways
- Repair runs $400 to $1,800 in Hialeah; full replacement runs $8,000 to $20,000.
- Hialeah’s salt air and UV load age roofing faster than inland Florida.
- Your written price comes before any work starts, under Clause 1 of the Haven Standard.
- We match parts to your Therma-Tru model number, not to a guess.
- Calls are answered by a live person 24/7.
Which Therma-Tru Models This Applies To

Therma-Tru’s roofing-adjacent line is mostly in the door-and-entry-product family, so the part you’re chasing depends on whether it’s a door surround, a threshold cap, a trim and flashing kit, or a component tied to a roof penetration above an entry. The fastest way to identify your exact assembly is to look for the Therma-Tru label on the door jamb or frame, which carries a model and series number, and then measure the rough opening width and height in inches before you call anyone. That label plus those two measurements are what let us match the part on the first trip instead of guessing twice.
For a brand like Therma-Tru, the OEM-versus-aftermarket decision matters more than people expect. The OEM part gives you an exact dimensional fit and keeps any manufacturer warranty on the assembly intact. A quality aftermarket equivalent can cost a third less and perform fine for a threshold or trim piece, but for anything with a weather seal or a flashing detail, an off-dimension substitute opens a gap that Hialeah rain will find. We carry sourcing depth across more than fifty vetted brands, so we can quote you both an OEM path and a compatible path and let the numbers decide. We don’t claim to keep parts on a truck; we source the right part and schedule the install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
- Granules in the gutter or along the drip edge. The protective granule layer on a shingle system is wearing off, which exposes the asphalt beneath to Florida UV and speeds up the decline.
- A ceiling stain that grows after each storm. Water is getting past a flashing or seal detail, often right where a roof meets a Therma-Tru entry surround or a wall penetration.
- Soft or spongy decking you can feel at the edge. Moisture has soaked the sheathing, and that rot spreads quietly under a sound-looking surface.
- Cracked or curling sealant along the threshold and flashing. Hialeah’s heat cycling and salt air dry out the sealant faster than inland buyers expect, opening a path for water.
- Daylight or a draft at the frame-to-roof junction. A separation at the joint means the flashing is no longer shedding water where it should.
If you see any of these, it’s worth a look before the next rainy season. Small flashing failures become sheathing repairs fast in this climate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the numbers look like in Hialeah for Therma-Tru-compatible roofing work:
| Service | Installed Price Range |
|---|---|
| Roof repair (flashing, seal, localized) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
The range moves with the size of the area, the deck condition once we open it up, the material you choose, and whether the flashing detail is simple or tied into an entry surround. You get a flat written price with a written scope and a written warranty before work starts, so the parts-plus-labor math is transparent rather than a surprise line at the end. If the sheathing turns out worse than expected, no work proceeds on a change until the change order is signed. The 365-Day Done Right Promise backs the work; if it’s not done right, we make it right. Bring a competitor’s quote and we’ll review it line by line at no charge.
DIY or Call Us?
You can safely check a few things yourself: look for the Therma-Tru label and note the model and series, measure the rough opening, and photograph any staining or soft spots so the numbers travel with you. What you should not do is get up on a wet or steep roof to pry up flashing or re-seal a joint. Roof work on a pitch is where DIY goes wrong, and in Hialeah the afternoon storms arrive without much warning. A misplaced seal or a flashing pried up and re-set badly can turn a $400 repair into a $1,800 one. If you’ve spotted a leak or a separation, call us at (888) 836-5914 and we’ll talk through what you found. Estimates are free.
FAQs

How long does Therma-Tru-compatible roofing last in Hialeah? Most well-installed systems last 15 to 25 years depending on material, but Hialeah’s salt air and high UV shorten that compared to inland Florida. Sealants and flashing details wear first, so a repair every few years often stretches the roof’s life. Call (888) 836-5914 for an exact quote on replacement; estimates are free.
Can it be repaired instead of replaced? Often, yes. A localized flashing or seal failure is usually a repair, while widespread granule loss or soft decking points to replacement. We tell you which one applies after we look. Call (888) 836-5914 to schedule a free estimate and we’ll give you a written answer.
How long does the swap take? A localized repair is often a few hours; a full replacement typically runs one to three days depending on the area and material. You’ll get a written timeline with the scope before anything starts. Call (888) 836-5914 for your exact number; estimates are free.
How do you source the part? We match your Therma-Tru model number and measurements against our vetted supplier network and quote you both an OEM and a compatible option. No part is ordered on a guess. Call (888) 836-5914 so we can match yours; estimates are free.
We also service KraftMaid, Cambria, and Silestone when your project spans more than the roof.
Ready to get a number in writing? Call Rowan Construction Group Hialeah at (888) 836-5914 for a free estimate. We’ll confirm the flat price, the written scope, and the documented photo record before anyone picks up a tool. Our technicians have up to 19 years of experience, and calls are answered by a live person around the clock.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












