







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Bathroom Remodeling: The Hialeah Owner’s Guide
Bathroom remodeling in Hialeah with Therma-Tru entry and shower doors typically runs $9,000 – $28,000 installed, and a quote is written before any work starts. When a Therma-Tru door in a Hialeah bathroom fails, owners usually notice the same three things in order: the door dragging on the threshold, a draft or moisture film along the frame, and finish peeling at the bottom rail within a season of the first two. That pattern points to a specific set of parts and adjustments, and it is worth identifying the exact cause before you price a replacement.
Which Therma-Tru Models This Applies To
Therma-Tru builds fiberglass and steel entry doors, patio doors, and interior doors, and the bathroom work we see in Hialeah most often involves entry doors to a bathroom wing, garage-to-house doors, and shower or privacy door assemblies that sit in high-humidity rooms. The parts we source depend on the series: hinges, thresholds, weatherstripping, sweeps, and glass frames are not universal, and a hinge cut for one door line often will not seat in another. The fastest way to identify your unit is the label on the hinge-side jamb, which lists the model and a door size that reads as width by height by thickness. Measure the slab and the rough opening yourself and you’ll usually match the label. On the OEM-versus-aftermarket question, Therma-Tru’s own parts fit right the first time; quality aftermarket equivalents cost less and last when the spec matches, so we quote both options with the difference spelled out. Rowan Construction Group is an independent service provider and is not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Bathroom Remodeling Is Failing
- The door drags or sticks at the bottom corner. That’s usually a hinge that has loosened in the jamb under humidity cycling, or a threshold that has swelled. Both are fixable without replacing the door.
- Peeling finish along the bottom rail. In Hialeah bathrooms, moisture trapped behind weatherstripping causes this before anything else. It signals a sweep or seal problem, not a paint problem.
- Moisture or fog between glass panes. A failed seal let humid air in. The glass unit needs replacing rather than cleaning; the frame itself is usually salvageable.
- A draft or light gap at the perimeter. Weatherstripping has compressed or pulled loose. It is a cheap part, but it explains most of the comfort complaints we get in Hialeah.
- The latch won’t catch or the handle feels loose. The latch or strike plate has shifted out of alignment, usually from door movement rather than a broken lock. Adjusting or replacing the hardware resolves it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Most Hialeah jobs involving Therma-Tru parts and bath-door work fall in the $9,000 – $28,000 bracket for a full bathroom remodel with the door and trim sorted out; a smaller project, such as a door swap and seal replacement, sits well below that. The range moves with the number of fixtures touched, whether the door needs a new slab or just hardware, the finish level, and whether tile or flooring gets replaced. Our written quote breaks parts and labor into separate lines, and it is flat: nothing changes unless a change order is signed. Every project is covered by the 365-Day Done Right Promise, and any crew member who comes to your home is background-checked and uniformed.
DIY or Call Us?
You can safely check a few things yourself: open and close the door to feel where it drags, look for a light gap at the edges, and photograph the label on the jamb. You can also tighten a loose hinge screw with a standard screwdriver. What gets risky is pulling a fiberglass door out of a frame, replacing a glass unit, and resetting a threshold; a misaligned slab can crack, and a bad seal leads to water damage behind the wall. For anything beyond a screwdriver and a photo, call us. We’ll quote the parts and labor in writing, and the call is answered by a live person. Call (888) 836-5914 for a free estimate.
FAQs

Expect 15 – 20 years for a fiberglass door in a covered, ventilated space, and closer to 10 – 15 years in Hialeah’s humidity if the seals aren’t maintained. A failed seal, not the door itself, is the usual reason people replace one sooner. Call (888) 836-5914 for a free estimate.
Often, yes. Weatherstripping, sweeps, hinges, and latch hardware are replaceable, and that is the first thing we check. The door slab or glass unit only needs replacing when the frame or seal is physically compromised. Call (888) 836-5914 for a free estimate.
A hardware and seal replacement usually takes an hour or two, while a full door slab swap runs most of a day. If tile or trim has to be opened up, plan for a second day. Call (888) 836-5914 to schedule the visit.
We read the jamb label, confirm the series and measurements, and quote both the OEM part and a quality aftermarket equivalent, with the difference stated. That way you can decide based on fit and price with both numbers on paper. Call (888) 836-5914 for a free estimate.
If you’re weighing a Therma-Tru replacement or a full bathroom remodel and want a real number in writing before anyone touches a tool, call Rowan Construction Group Hialeah at (888) 836-5914 for a free estimate. We’ll explain what we found, show you the photo record, and give you a flat price. We also work with KraftMaid, Cambria, and Silestone on the cabinetry and countertop side of the same project.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












