







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Hialeah Owner’s Guide
We build and finish Mr-Glass-compatible home additions and ADUs in Hialeah, and a full addition typically runs $45,000 – $130,000 depending on footprint, roof tie-in, and whether you’re adding a bathroom or kitchen. Detached or garage-conversion ADUs run $90,000 – $220,000. This page is for owners whose Mr-Glass addition or accessory unit has a specific failed component – a window unit, a door, a glazed opening, a roof transition – and who want that part matched correctly to their model before anything gets ordered.
Most Hialeah owners discover the problem the same way: a glazed unit in the addition starts fogging between the panes, or a sliding door in the ADU stops tracking square, or a corner of the tie-in wall shows a stain after a summer storm. Mr-Glass is the glazing and opening brand on the structure, not the whole build, so the fix usually lives in one assembly rather than the addition itself. We’ll tell you which one from a photo record and a measurement, not a guess.
One thing up front: Rowan Construction Group Hialeah is an independent service provider. We’re not affiliated with Mr-Glass, and we don’t claim to be. We work on Mr-Glass units every week, and we also handle KraftMaid, Cambria, and Silestone on the interior finishes that connect to the addition. Under Clause 1 of the Haven Standard, you get a written price before any work starts. That’s the whole discipline.
Key Takeaways
- Installed addition pricing in Hialeah: $45,000 – $130,000. ADU: $90,000 – $220,000.
- We match parts to your Mr-Glass model by label and measurement, not by assumption.
- The part that fails is almost always the glazed unit itself, the track, or the tie-in flashing – not the framing.
- Written price, signed change orders, 365-Day Done Right Promise on the work.
Which Mr-Glass Models This Applies To

Mr-Glass builds glazed additions and accessory units across a couple of product families, and the parts don’t cross over cleanly between them. The reliable identifier is on the unit itself, not on your paperwork. Look for a manufacturer label in one of three places depending on the assembly: the head jamb of a sliding or hinged glazed door, the inner face of the operable sash frame on a window unit, or a plate inside the utility chase on the ADU shell. That label carries a model or series code, a date of manufacture, and often a glass spec code – the spec code matters because it tells you whether the unit was built with laminated impact glazing, insulated double-pane, or a single laminate, and those behave differently in Florida heat and storm pressure.
If the label is gone or painted over, we measure instead. Frame width, height, sill depth, and the glazing thickness in millimeters get us to a matchable part. That measurement step is where most ordering mistakes happen – an owner eyeballs a sash, orders a replacement, and finds it doesn’t seat because the unit was built to a slightly different rough opening.
The OEM-versus-aftermarket call is honest and depends on the part. For a track, a roller, a lock mechanism, or a weather seal, a quality aftermarket equivalent is fine and often the only thing still made for an older Mr-Glass series. For a full glazed unit or a door slab, we recommend spec-matched replacement rather than a generic panel, because the glass spec and the impact rating have to line up with what the structure was built to carry. We don’t stock parts and we don’t carry parts on a truck – every part is sourced to your model. That’s why the label or the measurements matter so much. Our technicians have up to 19 years of experience reading both.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
These are the symptoms we actually see on Hialeah additions. Each one points to a different part, and the cause is usually specific.
- Fogging or haze between the panes. That’s seal failure in an insulated unit – moisture has gotten past the perimeter seal. In Hialeah’s humidity, an unsealed unit fogs within a season or two once the seal goes, and it will only get worse.
- Water staining at the tie-in wall after summer storms. The flashing where the addition roof meets the main house has lifted or the sealant has dried out. This is the number one cause of interior damage on additions here, and it’s a part problem, not a framing problem.
- A sliding or glazed door that drags or won’t track square. Either the rollers are worn flat or the track has filled with grit and lost its profile. If the door still seals when closed, it’s usually the hardware; if it hangs, the track is suspect.
- Condensation on the inside face of the glass, not between panes. That points to a failed perimeter weather seal or a poor thermal break, which lets the humid interior air reach cold glass. Different fix than seal failure between panes.
- Locks, handles, or hinges that won’t latch cleanly. Hardware wear, most often, and the cheapest of these to correct. If the door still locks but takes effort, catch it early.
Replacement Cost & What’s Included

A single failed glazed unit or door in a Mr-Glass addition typically lands inside the addition range we quote – $45,000 – $130,000 is the full-structure number, and a discrete part replacement is a fraction of that. For the practical line items on a Hialeah addition or ADU finish, here’s how it breaks down:
| Work | Installed Range (Hialeah) |
|---|---|
| Home Addition (full) | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Window Replacement (glazed unit) | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
What drives the range on a three-story material like this: footprint, roof tie-in complexity, whether the addition adds a wet wall, and the glass spec on the Mr-Glass units. Every one of those is line-itemed in the written quote before anyone starts. The parts-plus-labor split is shown transparently. The 365-Day Done Right Promise covers the work – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a safe middle ground and a dangerous edge. On the safe side: you can clean and inspect the tracks, check whether hardware latches cleanly, photograph where water is staining, and read the manufacturer label so we can match the part. All of that helps and none of it puts you at risk.
The edge is the glazing and the roof tie-in. A failed insulated unit or a lifted flashing runs under storm pressure in South Florida; a glazed door under load can drop if the track is pulled before the frame is supported; and an addition tie-in that gets resealed wrong lets water into the wall instead of out of it. A real expert flags that plainly. If the symptom is a fogged unit, a leaking tie-in, or a door that’s dropped, don’t take it apart. Call (888) 836-5914 and we’ll tell you which part failed, price it, and schedule the fix.
FAQs

Hardware and weather seals typically fail first inside 8 – 12 years in Florida’s heat and humidity, while well-matched glazed units run longer if the perimeter seal holds. If the seal goes, fogging shows within a season or two. Call (888) 836-5914 for an exact read on your unit – estimates are free.
Often yes – worn rollers, hardware, and weather seals are repaired or swapped rather than replaced, while failed insulated glazing and lifted flashing usually call for replacement. It depends on which part the symptom points to. Call us and we’ll say which – the written price comes before any work.
Hardware and seal swaps are usually a single visit, while a full glazed unit or a roof tie-in reflash runs longer and depends on the part arriving spec-matched. We give you the actual window in the written quote, not a promise. Call (888) 836-5914 to get it scheduled around your Hialeah address.
We match by the manufacturer label or by measurement – frame width, height, sill depth, glazing thickness – and order to your specific model and glass spec. We don’t stock parts and don’t carry them on a truck, so accuracy up front is the whole game. Call (888) 836-5914 and bring the label info if you have it.
Get Your Hialeah Addition or ADU Priced in Writing
Whether it’s a single fogged Mr-Glass unit or a full addition or garage-conversion ADU, the next step is the same: a free estimate with a flat written price, a written scope, and the 365-Day Done Right Promise printed on the page. Crews are background-checked and uniformed, a live person answers calls 24/7, and every visit includes a documented photo record as standard. Call (888) 836-5914 for your free estimate, and bring any written estimate you’ve already got – our Free Second Opinion will review it line by line at no charge.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












