







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Bathroom Remodeling: The Hialeah Owner’s Guide
We remodel bathrooms in Hialeah with Mr-Glass-compatible enclosures, shower surrounds and glass panel systems, and a full bathroom remodel typically runs $9,000 – $28,000 installed. A smaller scope focused on the glass and surround often lands between $5,000 – $12,000. Those are written, flat prices before anyone picks up a tool, not estimates that drift once the old tile comes off.
Owners usually discover the failure the same way. A frameless shower door in a 1970s Hialeah ranch starts dragging on the bottom sweep, or the roller on a bypass panel jumps the track and won’t seat again. Then the water spots stop coming out, the sealant beads pull away from the tile, and the glass feels loose when you press on the handle. Mr-Glass builds bathroom glass and shower systems that hold up well, but the South Florida combination of humidity, hard water and daily use works on the hardware and the seals, not the glass itself.
Which Mr-Glass Models This Applies To

Mr-Glass makes a broad line of shower doors, tub enclosures, framed and frameless sliders, and mirror and glass panel systems. The parts that fail are almost always the hardware and the seal: rollers, pivot hardware, handles, sweeps and the elastomeric seals around the fixed panel. The glass rarely fails on its own.
To match the right part, you identify your unit three ways. First, look for the label Mr-Glass applies to the fixed panel or the header, usually a small foil or printed tag with a series reference. Second, measure the thickness of the glass with calipers: framed sliders are commonly 3/16-inch or 1/4-inch, frameless panels often 3/8-inch to 1/2-inch. Third, measure the door opening and the track width, since the roller and track profile is what you actually replace.
On OEM versus aftermarket: for a Mr-Glass unit, genuine hardware is the safest fit if the series is still supported, and quality aftermarket rollers and sweeps match many of the common profiles exactly at lower cost. Where the two diverge is the track profile and the glass thickness tolerance. A roller that’s a few thousandths off the original will jump the track within months. We’re an independent service provider, not affiliated with Mr-Glass, so we match to your unit and tell you plainly which option fits.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Bathroom Remodeling Is Failing
Here’s what we actually see in Hialeah bathrooms, with the cause behind each one:
- Door drags or won’t close flush. Worn rollers or a dropped pivot, usually after years of daily use and the humidity that softens the hardware tolerances.
- Water leaking at the fixed panel. The seal has pulled away from the tile or the glass, letting water behind the panel and into the framing.
- Cloudy, etched glass you can’t clean. Hard water mineral deposits have bonded to the surface, and once they etch in, cleaning won’t bring it back.
- Loose handle or hinge. Fastener hardware has backed out or the glass has flexed enough to loosen the mount, which is a safety issue on a heavy frameless door.
- Mildew in the sealant lines and sweeps. Old silicone and sweeps trap moisture, and in a Hialeah bathroom the growth comes back no matter how often you scrub it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Hialeah, a full Mr-Glass bathroom remodel runs $9,000 – $28,000 installed. A smaller bathroom remodel sits at $5,000 – $12,000, a walk-in shower installation at $4,500 – $12,000, a tub-to-shower conversion at $3,500 – $10,000, and a straight shower replacement at $3,000 – $8,500. A vanity installation alone is $800 – $3,000.
| Scope | Installed range (Hialeah) |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
What drives the number: glass thickness and panel count, tile versus acrylic surround, and whether the substrate behind the old unit is sound. Our quote is a flat price with a written scope and a written warranty, parts and labor split out line by line, so you see the hardware cost against the install cost. Work is covered by the 365-Day Done Right Promise.
DIY or Call Us?
There’s a real split here. You can safely check the label and measure glass thickness, inspect the rollers and sweeps, and clean and re-caulk a pulled seal. That’s low-risk.
What goes wrong with DIY: a frameless shower door is heavy, tempered glass, and a dropped panel or a hinge that lets go under load sends glass and edges where a person is standing. Tempered glass shatters into small pieces, but it still cuts. The installation of the glass panel and the pivot or roller hardware is where the real skill sits, and where we see homeowner installs fail is at the seal and the mounting, not the glass. If the door feels loose or a hinge is backing out, that’s the point to stop and call. Call (888) 836-5914 for a free estimate and a written scope. Our technicians have up to 19 years of experience.
FAQs

How long does a Mr-Glass shower enclosure last in Florida? The glass holds for many years, but the hardware and seals wear in five to ten years of daily use in South Florida humidity and hard water. Replacing the rollers, sweeps and seals usually restores the whole unit. Call (888) 836-5914 for an exact quote, and estimates are free.
Can the glass be repaired instead of replaced? Often yes. If the panel is intact and the glass is just scored or etched, hardware and seal replacement handles it. If the glass is cracked or chipped at an edge, replacement is the right call. We’ll tell you which after we look.
How long does a replacement take? A hardware and seal swap runs a few hours. A full shower replacement usually takes a few days once parts are matched and scheduled. We give you a written timeline, not a guess.
How do you source the part? We match your Mr-Glass series by the panel label and measurements, then quote genuine hardware or a matching aftermarket equivalent at the lower cost. We don’t carry stock, so we quote the exact part before we order. The Free Second Opinion on any written estimate applies if you have a competitor’s quote.
If you’re in Hialeah and your Mr-Glass bathroom glass needs a match, a fix or a full remodel, we put the price in writing before anyone touches it. Call (888) 836-5914 for a free estimate and a written scope, and we’ll talk through what’s actually failing and what it costs to make it right.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












