







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Hialeah Owner’s Guide
We install Boral-specified home additions and ADUs in Hialeah, and the installed price for a Boral-clad addition runs $45,000 – $130,000, while a detached ADU lands at $90,000 – $220,000. Those numbers assume a written flat price and a scope document before anyone touches the lot. We are an independent contractor and are not affiliated with Boral, though Boral is one of the brands we build with.
Hialeah owners usually find out something is wrong with a Boral assembly slowly, and then all at once. A hairline seam opens between a siding panel and the trim, a window head after a summer storm lets water in behind the weather barrier, or the addition stops holding temperature the way it did the first year. In every case, the culprit is almost always a specific component that failed, not the whole addition.
Key Takeaways
- Installed addition pricing in Hialeah: $45,000 – $130,000; detached ADU: $90,000 – $220,000.
- Boral systems differ by series and profile. Matching the part requires the accessory label, not a photo.
- The classic Hialeah failure is UV and wind-driven rain working a seam open, then water reaching the sheathing.
- We quote a flat written price before work starts and will not proceed on a change without a signed change order.
Which Boral Models This Applies To

Boral makes several exterior and interior systems that land in a Hialeah addition or ADU, and the part you need depends on which one is in the wall. The most common are Boral siding profiles, Boral trim and fascia, Boral cladding systems for the ADU envelope, and Boral brick or stone veneer. Each has its own series and profile line.
Before you order anything, find the accessory label. On siding it’s usually printed on the back of a panel or tucked inside the carton; on trim it may be stamped on an end. Note the series name, the profile, and the nominal dimensions. Then measure the installed piece at three points, because a labeled profile can still be trimmed in the field.
The OEM decision is the one that matters. For Boral-specific parts, buy the OEM part. A generic match may look close and fail differently, especially with textured or veneer products where the profile and substrate bond are engineered together. For fasteners and sealants, a quality aftermarket equivalent is fine as long as it meets the same specification.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
Here’s what homeowners describe when they call us in Hialeah. Each symptom points to a specific component.
- Water staining or soft spots near a seam or window head. The weather barrier or flashing has failed, and wind-driven rain from a summer storm is reaching the sheathing behind the Boral cladding. Left alone, this is where rot starts.
- Panels lifting, cupping, or rattling in wind. Fasteners have backed out or the clip system has loosened. In Hialeah’s sustained heat, fasteners and clips take a beating and the panel starts to move.
- Chalky, faded, or uneven color on a sun-facing wall. UV exposure has degraded the finish on that elevation. It’s cosmetic at first, but it signals the surface is aging faster than the rest of the addition.
- Cracks at corners and joints. This points to movement, either in the framing or in the veneer bond. Historic temperature swings and building movement open joints, and water follows the crack.
- An addition that won’t hold temperature or feels humid. The envelope has a gap. Air and moisture are moving through a failed part, and the indoor climate pays for it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the numbers look like in Hialeah for parts and installation on a Boral addition or ADU envelope.
| Scope | Installed Range (Hialeah) |
|---|---|
| Spot repair of a single failed component | $450 – $2,500 |
| Section replacement (one elevation) | $3,000 – $12,000 |
| Full addition envelope re-clad | $18,000 – $55,000 |
| Home addition (full) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
The range is driven by how much material has to come off to reach the failed part, whether the sheathing beneath is sound, and the series and finish you choose. We give you the part cost and the labor cost as separate line items so you can see what you’re paying for. Our technicians have up to 19 years of experience with Boral systems. Every job carries our 365-Day Done Right Promise: if it is not done right, we make it right.
DIY or Call Us?
There’s a clear line here. You can safely check a few things yourself: look for water staining on interior walls near the addition, photograph any lifting or cracked panel, and note the model label on a spare piece. That information is useful to us and costs nothing.
What you should not do is pull cladding off an addition to chase a leak, or attempt anything that involves the structural sheathing, weather barrier, or fastening system. Removing Boral cladding without knowing what’s behind it can open a water path that wasn’t there, and once the weather barrier is disturbed the wall is far more vulnerable than before. That work needs a trained installer who understands how the layers go back together.
Call us at (888) 836-5914 for a free estimate. We’ll tell you what we found and what it takes to fix it, in writing, before any work starts.
FAQs

With correct installation and maintained flashing and sealant, a Boral-clad addition should serve 30 years or more. In Hialeah, the variables that shorten that are wind-driven rain reaching the barrier and UV exposure on sun-facing elevations, so the flashing and the sealants at the seams are the parts that govern lifespan, not the cladding itself.
Often, yes. A single lifted panel, a failed sealant joint, or a localized flashing issue can usually be repaired without re-cladding the elevation. The deciding factor is whether the sheathing or weather barrier behind it has been compromised, which we confirm by inspection before we recommend repair or replacement. Call (888) 836-5914 and we’ll give you an honest answer.
A single-component repair is usually one day. A section replacement on one elevation runs two to four days. A full envelope re-clad takes one to three weeks depending on size and weather. We put the schedule in the written scope before we start, so there’s no guessing about how long your Hialeah addition will be open.
We match to the series and profile from the accessory label and field measurements, then order the OEM part for Boral-specific components. We don’t guess from a photo, and we don’t substitute a look-alike when the profile and substrate bond have to match. If the part is back-ordered, we tell you the lead time up front. We also source KraftMaid, Cambria, and Silestone for the interior side of the same addition. Call (888) 836-5914 for a free estimate and a written price before anything is ordered.
Rowan Construction Group Hialeah works across seven trades and fifty-plus vetted brands, and every job is quoted with a flat written price and a written scope first. Bring a competitor’s estimate and we’ll review it line by line at no charge with our Free Second Opinion.
Call (888) 836-5914 to schedule your free estimate in Hialeah.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












