







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Hialeah Owner’s Guide
We install and repair Boral-compatible clay and concrete roof systems across Hialeah, and roof replacement runs $8,000 – $20,000 for most single-family homes here, while targeted roof repair lands between $400 and $1,800. Tile roof repair specifically, which is what most Boral failures need, runs $600 – $2,500 depending on how many pieces broke and how much underlayment has to come up with them. Replacement tile and underlayment work is scheduled, not same-day; we quote in writing before anything starts.
Hialeah owners usually find out something is wrong one of two ways. Either a tile slides loose in a storm and a neighbor points it out, or a brown water stain blooms on a ceiling after a summer afternoon downpour. Boral tile itself is durable; the failures we see are almost always in what sits underneath it or in how it was fastened when the roof went on.
Which Boral Models This Applies To

Boral makes clay and concrete roof tile in several profiles, and the part that matters differs by profile. The common ones on Hialeah roofs are flat-shake and barrel profiles in the concrete lines (Sierra, Saxony) and the clay flat and barrel tiles. Identify your tile by pulling the profile name off the original roofing paperwork if it survived, or by measuring a single piece: the exposed width, the length, and the thickness. Barrel tiles and flat tiles do not interchange. Neither do the different barrel curves, and that’s the compatibility gotcha that bites people: a barrel tile pulled from a Saxony run won’t seat against a different barrel radius, and the roof will never lie flat again in that course.
Underlayment is the second half of the equation, and it’s brand-agnostic. Boral tile sits on a membrane, and in South Florida that membrane is what actually keeps water out. Our technicians have up to 19 years of experience reading both. On the OEM-versus-aftermarket question: for tile, match the profile, color, and thickness to the existing course, because a mismatched piece looks wrong for the life of the roof. For the underlayment and fasteners, a quality self-adhering membrane and corrosion-rated fasteners meet the same spec Boral’s installation guidance calls for. We don’t carry parts on a truck and we don’t stock tile; every piece is sourced to your profile after we’ve measured. Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Boral.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
- Cracked or slipped tiles after a storm. Wind lifts the edge of a flat or barrel piece and drops it back out of line, breaking the interlock that holds the course. One gap lets the next wind gust start on its neighbor.
- Ceiling stains, not roof stains. The tile is doing its job overhead; water is getting past the underlayment seam or a flashing at a valley, vent, or wall. By the time it reaches the ceiling, the membrane has been failing for a season or more.
- Granules in the gutters or at the drip edge. On concrete tile, surface material shedding early points to a weathered batch or a roof that spent years without proper slope drainage. Piles at the weep screed mean water is running where it shouldn’t.
- Visible sagging or a soft spot underfoot. This is a decking and framing sign, not a tile sign, and it needs a look before anything else. Hialeah’s humidity accelerates rot in any wood the membrane has been leaking onto.
- Lifted hip and ridge pieces. Ridge tiles are fastened, not just mortared, on a correct install. When they loosen, it’s usually aged mortar and a fastener that has given up, and each one is an open door to wind-driven rain.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Hialeah, a Boral tile roof replacement runs $8,000 – $20,000 installed; tile roof repair runs $600 – $2,500. The range is driven by three things: square footage, how much tile must be sourced to match your profile, and whether the underlayment comes up with the tile. Repair pricing includes matching pieces, the membrane patch, fasteners, and labor.
- Roof replacement, full tile system: $8,000 – $20,000
- Tile roof repair, broken or slipped pieces: $600 – $2,500
- General roof repair, flashing and leaks: $400 – $1,800
- Metal roof installation, if you’re weighing a switch: $15,000 – $40,000
You get a flat written price and written scope before we start. No change proceeds without a signed change order, so the number you agree to is the number on the invoice, not a few hundred dollars above it. Every visit includes a documented photo record, and the 365-Day Done Right Promise covers the work: if it’s not right, we make it right.
DIY or Call Us?
You can safely look from the ground. Note slipped or cracked tiles, check the ceiling inside for stains after rain, and clear debris from valleys and gutters with a long pole. That’s the limit of what we’d recommend.
Getting on a tile roof is where DIY goes wrong. Tile is brittle, the pitch on most Hialeah roofs is steep, and walking a barrel course wrong cracks pieces that can’t be matched once they’re off. South Florida heat and sudden storms make the timing worse. The membrane and flashing work underneath is where nearly every leak lives, and that’s not a surface fix. Call Rowan Construction Group Hialeah at (888) 836-5914 for a free estimate, and we’ll put the price in writing before anything gets touched.
FAQs

A well-installed Boral tile roof can serve decades, but in Hialeah the underlayment is the limiting factor, not the tile. Under South Florida sun and humidity, membranes commonly need attention well before the tile does, which is why we inspect the layer beneath when we’re up there. The tile may last far longer than the roof system holding it. Call (888) 836-5914 and we’ll tell you what we find.
Often, yes. Isolated cracked or slipped tiles, a leaking valley, and worn flashing are all repairable, and tile roof repair runs $600 – $2,500 here. If the underlayment is failing across whole slopes or the decking shows rot, replacement is the honest answer. We quote both and let you decide. Call (888) 836-5914 for an assessment.
A small repair, a handful of pieces and a membrane patch, is usually a partial-day job once the matching tile is on site. Full replacement is scheduled over multiple days. Because we source tile to your profile after measuring rather than carrying it, timing depends on the run. We give you the schedule in writing. Call (888) 836-5914 for a written timeline.
We measure your existing pieces and match the profile, color, and thickness, then source them from our vetted supplier network rather than guessing at a lookalike. Fifty-plus material brands run through our sourcing, and the same discipline applies to tile as to our KraftMaid, Cambria, and Silestone work indoors. You get the match confirmed before install. Call (888) 836-5914 to start the measurement.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












