A Rowan company - serving Hialeah, FL
A home with a brand-new roof and gutters at golden hour
Tamko · Hialeah

Tamko Windows & Doors in Hialeah, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Hialeah
A newly finished roof with a ridge vent and step flashing
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
A new casement window over a kitchen sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Windows & Doors: The Hialeah Owner’s Guide

We install and repair Tamko-compatible windows and doors throughout Hialeah, and full window replacement in this market runs $4,500 – $15,000 for a typical home, while impact-rated window installation runs $8,000 – $25,000. Single parts like a sash balance, sweep, lock set, or hinge set are usually replaced inside one visit once we’ve matched the part to your door or window series. Most Hialeah owners discover a failed part the same way: a door that suddenly needs a hip-check to latch, a window that creeps down on its own, or a bottom sweep leaving a pencil line of light and rain on the threshold during a summer downpour.

Call (888) 836-5914

Hialeah sits in a wind-borne debris region, and its combination of salt air, sustained humidity, and hurricane-season pressure changes is hard on every moving part of a window or door. Tamko components are no exception. What usually goes is the smallest, cheapest piece: the balance, the roller, the sweep, the lock.

Which Tamko Models This Applies To

New architectural shingles with a clean valley

Tamko’s line is wide, and parts do not cross between series. Sliding patio doors use different roller and track assemblies than swinging entry doors, and hung or sliding windows use spring or block-and-tackle balances that depend on the sash weight and the frame channel dimensions. A balance rated for one sash weight will not hold a heavier glass package. Confirming the model before ordering prevents the most common mistake we see: a part bought online that fits the brand but not the unit.

To identify your unit, check three places. First, the manufacturer’s label, usually in the head jamb of a door or the top frame of a window, often with a series code and a date of manufacture. Second, measure the visible glass and the frame opening yourself, in inches, to the nearest eighth. Third, photograph the failed part next to a tape measure showing its length. That last step matters more than most people expect: balances and hinges come in measured lengths, and a half-inch error is a returned part.

On the OEM-versus-aftermarket question, our answer is narrower than a sales pitch. For wear parts like sweeps, weatherstrip, rollers, and hinges, a quality aftermarket equivalent from a known supplier is usually as good and often better than an OEM part, and it costs less. For structural or safety pieces, particularly impact-rated glass, lock hardware on impact doors, and any component that carries the product approval, we use parts that match the original specification. In Florida, an impact-rated opening that gets the wrong lock or the wrong glazing is no longer the tested assembly, and that can affect both insurance and inspection.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Windows & Doors Is Failing

These are the symptoms we find most often on Tamko units in Hialeah, and what sits underneath each one.

  • The sash won’t stay up, or slides down on its own. The balance has lost tension or the cord has frayed. Balances are wear parts with a finite cycle life, and humidity accelerates the wear.
  • The door drags on the threshold or rubs the jamb. A worn roller, a dropped hinge, or a shifted frame. On sliding doors, a flattened roller is the usual cause; on swinging doors, look at the hinge screws and the frame first.
  • Daylight or water at the bottom of the door. The sweep or bottom seal has hardened and shrunk. In Hialeah’s heat, rubber sweeps lose flexibility faster than in cooler climates, and once the seal is gone, wind-driven rain follows.
  • The lock catches, sticks, or won’t fully engage. Misalignment from a settled frame, or worn lock hardware. This one deserves prompt attention, because a lock that doesn’t fully seat is a security gap, not just an annoyance.
  • Fogging between the panes of an insulated unit. The seal on the glass unit has failed and moisture has entered. This is not a part you can swap; the sealed unit itself is replaced.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Here is the honest picture for Hialeah, priced as installed work, not a bare part number.

  • Single part replacement, such as a balance, sweep, roller, or hinge set: typically a modest labor charge plus the part, confirmed in writing before we start.
  • Window replacement, full unit: $4,500 – $15,000.
  • Impact window installation: $8,000 – $25,000.

What drives the range upward: the number of openings, the glass package, whether the frames are impact-rated, and how much trim and stucco work the opening needs. What keeps it honest: we deliver a flat written price with a written scope before any work begins, and no change proceeds without a signed change order. That discipline is why our projects finish within a few percent of the number the customer agreed to. Every visit includes a documented photo record as standard, so you have evidence of what we found and what we replaced, and the work carries our 365-Day Done Right Promise. If it isn’t done right, we make it right.

DIY or Call Us?

Some checks are safe for any homeowner. Confirm the unit’s label and series, take measurements, photograph the failed part, and tighten visible hinge screws or clean a sliding track. Those steps help you describe the problem accurately, and they cost nothing.

Where DIY goes wrong: replacing a balance means working with a spring under tension inside the frame, and the wrong technique or the wrong part can let it snap back without warning. Replacing an impact-rated lock or glazing with a non-specified part can take a tested opening out of compliance. And reinstalling a sliding door or window unit so it sits square, seals against wind-driven rain, and drains properly is harder than it looks, especially on older Hialeah frames. The risk is not just an injury; it is water intrusion you won’t notice until the next storm.

If the diagnosis is uncertain, or the part is structural or safety-related, call us. A written price before work starts is our standard, and estimates are free. Reach us at (888) 836-5914.

FAQs

A second-story addition that matches the existing roofline

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new paver pool deckAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porch

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Hialeah

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Hialeah team

A local vetted partner works across Hialeah and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 836-5914
Local Service Coverage

Request a Free Estimate in Hialeah

Tell us what you need - Rowan Construction Group Hialeah responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch