







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Home Additions & ADU: The Hialeah Owner’s Guide
We build Atlas-compatible home additions and ADUs in Hialeah, and the installed price for a home addition runs $45,000 – $130,000, with a detached or attached ADU between $90,000 and $220,000. If your existing Atlas addition is failing, you usually find out one of three ways: a hairline crack that keeps reopening along the block wall, a ceiling stain after a July downpour, or a door that suddenly won’t latch square. Rowan Construction Group Hialeah is an independent contractor and is not affiliated with Atlas, though we work with these structures often.
Key Takeaways
- Atlas addition and ADU assemblies in Hialeah fail mainly on waterproofing and tie-in detail, not on the block or framing itself.
- Installed addition pricing: $45,000 – $130,000. ADU: $90,000 – $220,000. Garage conversion: $30,000 – $80,000.
- The number is written before anyone starts. No change proceeds without a signed change order.
Which Atlas Models This Applies To

Atlas builds its addition and ADU systems around modular wall panels and roof trusses, and the version matters because the truss spacing and panel tie-in changed across production runs. The reliable way to identify yours is the data plate on the interior of the nearest exterior panel, usually inside a closet or utility chase, plus a tape measure across two or three panel seams. Record the panel width, the truss spacing, and the model or series code on that plate before you call anyone.
On the OEM question: Atlas-branded replacement panels are the cleanest fit when the plate is legible and the series is still in production. When it isn’t, a quality aftermarket panel matched to the same width and load rating does the job, and you should insist the quote says which one is being used. Across our vetted brands we work with KraftMaid, Cambria and Silestone on the interior finishes, and we name every component in the written scope rather than describing it as “matching materials.”
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Atlas Home Additions & ADU Is Failing
- A crack that reopens after patching. This usually points to movement at the foundation or a missing control joint, not bad mortar. Patching the face hides the cause for a season.
- A ceiling or wall stain after heavy rain. In Hialeah’s summer pattern, a stain means the roof-to-wall flashing or the panel seam has let water in. The stain is the second problem; the entry point is the first.
- A door or window that’s gone out of square. When a door stops latching, the frame has moved. That can be settling, or it can be a truss connection that’s loosened.
- Soft or bubbling drywall near the floor line. Rising damp and a failed moisture barrier show up low first. By the time it bubbles, the framing behind it is wet.
- Visible daylight or draft at a panel seam. A seam that’s opened has lost its seal. In an ADU that’s a weather and a security problem at the same time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

What drives the range is scope: how much of the failing assembly is being replaced, whether the roof tie-in is opened, and whether permits and inspections apply. A repair to a failing seam sits at the low end; a full addition rebuild sits at the high end of $45,000 – $130,000. A garage conversion runs $30,000 – $80,000, and a standalone ADU $90,000 – $220,000.
Every Rowan quote is a flat written price with a written scope, delivered before work starts. Parts and labor are broken out line by line. The work carries our 365-Day Done Right Promise: if it isn’t done right, we make it right, backed by The Haven Standard and a terms page, not an asterisk. No change order gets signed without your signature first.
DIY or Call Us?
What you can safely do yourself: find and photograph the data plate, measure the panel width and truss spacing, and note where the water is coming in. That’s information, and it makes the quote better. What we’d steer you away from is opening a panel seam or pulling back flashing on a structure that’s holding a roof load. That’s not a scare tactic; it’s the difference between a check and a repair, and the failure mode there involves structural loading, not just a wet wall.
If you’ve already got a competitor’s written estimate, we’ll review it line by line at no charge. Call (888) 836-5914 to schedule a free estimate.
FAQs

With intact flashing and a functioning moisture barrier, the block and framing run decades; the waterproofing detail is what fails first in Hialeah’s rain and humidity, usually within 10 to 15 years if it was marginal to begin with. Call (888) 836-5914 for a free assessment of yours.
Often yes, if the leak hasn’t reached the framing. A seam that’s simply lost its seal can be resealed and re-flashed; a seam with wet framing behind it needs more. We tell you which one you have, in writing, before work starts.
A flashing or seam repair is typically a one- to two-day job. A panel or section replacement runs longer because it depends on permit and inspection timing in Hialeah. Your written scope states the schedule and the permit steps up front.
We start from your data plate and measurements, then match to Atlas OEM where the series is in production and to a quality aftermarket equivalent where it isn’t, with the choice named in the quote. Call (888) 836-5914 and have the plate number ready.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












