







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Windows & Doors: The Hialeah Owner’s Guide
We install and replace IKO windows and doors across Hialeah, and most full-window projects land between $4,500 and $15,000 for a standard replacement and $8,000 to $25,000 for impact-rated units, quoted as a flat written price before any work starts. Single failed components – a sash, a glazing unit, a hinge set, a weatherstrip run – usually fall well below those figures and can often be scheduled without a long wait. Most Hialeah owners find out something has gone wrong the same way: a fogged pane they can’t wipe clear, a door that started dragging after the summer rains, or a window that whistles during a tropical system. South Florida heat and salt air are hard on window seals and door hardware, and IKO products are no exception.
Which IKO Models This Applies To

IKO builds windows and doors for both new construction and replacement work, and the part you need depends on which line the unit belongs to. The fastest way to identify yours is the manufacturer label – usually a sticker on the top or side of the sash, or inside the door jamb – which lists the series, the unit size, the glass package, and the production date. Photograph that label before you order anything. The next step is measuring the rough opening and the visible glass area; IKO replacement sashes and glazing units are sized to the frame, not the wall, so a tape measure on the exterior trim tells you very little.
Then the OEM-versus-aftermarket decision. OEM IKO parts match the original extrusion, hardware pattern, and glass spec exactly, which matters most on impact-rated units where the assembly was certified as a system. Aftermarket equivalents can work well for non-structural pieces like weatherstrip, sweeps, and standard hinges, and they cost less. For impact glass and structural frame components, we source to the original specification – swapping in an uncertified glazing unit on a Miami-Dade or Broward product-approval assembly can void the rating you paid for. We’re an independent service provider and not affiliated with IKO, so we’ll tell you plainly when OEM is the right call and when it isn’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Windows & Doors Is Failing
Windows and doors rarely fail all at once. They give you signals for months first, and catching them early is the difference between a $200 hardware fix and a full unit replacement. Here’s what we see most often in Hialeah homes.
- Fogging or condensation between the panes. The seal on the insulating glass unit has failed, letting moisture into the air space. It’s cosmetic at first and gets worse every wet season – the desiccant eventually saturates and the glass stays cloudy year-round.
- Water staining or soft wood at the sill. This is the one that worries us. It usually means the sill pan or the sealant line has opened up, and water has been getting behind the frame. Left alone, it reaches the wall sheathing and the repair stops being about the window.
- A door that drags, sticks, or won’t latch flush. In Hialeah’s humidity, wood and composite door slabs swell and the hinges sag under their own weight. Sometimes it’s a hinge adjustment; sometimes the frame itself has racked and the whole opening needs attention.
- Drafts, whistling, or visible daylight at the edges. Worn weatherstrip and failed sweeps are the usual cause, and they let both air and water in. During a tropical system this is exactly where wind-driven rain finds its way inside.
- Hardware that won’t operate smoothly. Handles that stick, locks that need two hands, rollers that grind – corrosion and wear on the operating hardware. On impact units, this is also a safety item, because the lock and latch have to engage properly for the unit to perform as tested.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Hialeah, budget $4,500 – $15,000 for a standard window replacement project and $8,000 – $25,000 for impact window installation. The range is driven by three things: how many openings, whether the units are impact-rated, and what we find when the old unit comes out. A straight swap into a sound opening sits at the low end. Rotted sill framing, a failed sill pan, or stucco that needs to be cut back and patched pushes it toward the top.
Every quote is a flat written price with a written scope, so you know what’s included before anyone picks up a tool. Parts and labor are broken out line by line. If we open a wall and find something the original quote couldn’t have seen, no work proceeds on that change until you’ve signed a change order – that’s the discipline behind our record of keeping projects within a few percent of the agreed number. The installation carries our 365-Day Done Right Promise, and every visit includes a documented photo record of what we found and what we did.
DIY or Call Us?
Some things you can safely check yourself. Clean the weep holes at the bottom of the frame so water can drain. Look at the weatherstrip and sweeps for obvious wear. Wipe down and lubricate the hinges and lock hardware. Photograph the manufacturer label and measure the opening. Those steps cost nothing and help you get an accurate quote.
Where DIY goes wrong is the part that involves the glass and the frame. Replacing an insulated glazing unit means handling a sealed assembly that can crack under uneven pressure, and on impact-rated products, reinstalling it incorrectly can compromise the rating the unit was certified with. Water intrusion repairs are worse: the visible damage is usually the smallest part of the problem. If you’ve got fogged glass, a soft sill, or a door that won’t latch, call us at (888) 836-5914 and we’ll give you a written price for the fix. Estimates are free.
FAQs

Most IKO window and door assemblies hold up for 20 to 30 years, but in Hialeah’s heat, humidity, and salt air, seals and hardware typically need attention sooner – often in the 10-to-15-year range. The glass unit seal is usually the first thing to go, followed by weatherstrip and hinge hardware. Replacing a failed component early will usually extend the life of the whole assembly. Call (888) 836-5914 for an exact quote on your unit.
Often, yes. A fogged pane can be reglazed without replacing the frame. A dragging door frequently needs a hinge adjustment or a new sweep set. Repairs make sense when the frame is sound and the failure is limited to one component; replacement is the better call when the frame has racked, the sill has rotted, or multiple parts have failed at once. We’ll tell you which one you’re looking at before you spend anything. Call (888) 836-5914 to schedule a free assessment.
A single window reglaze or door hardware repair usually takes a few hours, while a full window replacement project runs one to three days depending on the number of openings. Impact-rated units and projects with framing repairs take longer. We’ll give you a realistic timeline in the written quote so you can plan around it. Call (888) 836-5914 for a schedule and a price.
We start with the manufacturer label on your unit – the series, size, and glass package listed there tell us exactly what to order. For impact-rated products, we source to the original specification so the assembly’s rating stays intact; for standard hardware and weatherstrip, we’ll quote a quality aftermarket equivalent if it saves you money. We don’t stock IKO parts locally, so lead time depends on the part, and we’ll tell you upfront how long it will be. Call (888) 836-5914 for a free written estimate.
We also work with KraftMaid, Cambria, and Silestone on the interior side of these projects. If you’re weighing a window replacement against a larger remodel, we’ll walk you through both numbers in writing.
Call Rowan Construction Group Hialeah at (888) 836-5914 to schedule your free estimate. Bring a competitor’s quote and we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












