







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The Hialeah Owner’s Guide
We build and finish Schluter-spec home additions and ADUs in Hialeah, and the all-in number for a permitted addition here runs $45,000 – $130,000, with ADU construction at $90,000 – $220,000 and a garage conversion at $30,000 – $80,000. That range is a written flat price, not a “starting at.” The Schluter element most Hialeah owners discover late is the waterproofing and uncoupling layer under the tile: when KERDI or DITRA fails, you don’t see a broken part, you see a grout line that keeps turning dark, a hollow thud underfoot, or a soft spot at the shower curb months after a slab addition was tiled. That’s the failure signal this page unpacks.
Which Schluter Models This Applies To
Schluter isn’t one product; it’s a system, and the “model” you need depends on where the part sits. For tile over a concrete slab addition, DITRA and DITRA-HEAT uncoupling membranes come in roll widths (roughly 3′ 3″ and 1-meter formats) and are matched to tile size and substrate, not to a serial number. For wet areas (shower floors, ADU bath pans), KERDI and KERDI-BAND are the waterproofing family, and the band width and fleece spec have to match the drain flange and curb profile. Schluter-SHEET membranes are thinset-bonded; KERDI-FIX is the adhesive for the joints. To identify the right part, read the printed edge of the membrane roll (the width and product code are stamped there), measure the drain flange diameter, and note whether your substrate is slab-on-grade, wood subfloor, or a Schluter shower tray. The OEM-versus-equivalent call: Schluter fleece and its bonding pattern are the reason the warranty holds, so we match genuine Schluter on the wet-side layers and only consider equivalents on trim and transition pieces where the spec allows it. Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Schluter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
- Grout lines that stay dark after cleaning. Moisture is wicking up through a compromised KERDI seam, which usually traces to a band that wasn’t overlapped or thinset that skinned over before the membrane went down.
- A hollow sound underfoot. Tap the tile with a screwdriver handle; a dull hollow note means the DITRA lost bond, often where the slab cured unevenly in Hialeah’s humidity and the thinset never fully grabbed.
- A soft, spongy spot at the shower curb or ADU bath threshold. That’s a curb wrapped without the proper KERDI-BAND overlap, letting water reach the framing for weeks before you notice.
- Lippage (one tile edge sitting above its neighbor) that grows over a season. Uncoupling membranes handle minor movement, but a failed sheet lets the slab’s seasonal swell telegraph straight through to the tile face.
- Efflorescence, a white chalky bloom, at the base of an exterior wall of the addition. Water is moving behind the tile and finding the path of least resistance, a real concern on the west-facing walls that take Hialeah’s afternoon storms.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Hialeah addition or ADU, the waterproofing and membrane scope is bundled into the overall project, and the lead range for the full build is $45,000 – $130,000; an ADU runs $90,000 – $220,000 and a garage conversion $30,000 – $80,000. What drives the number is square footage of tiled wet area, whether the existing tile and thinset have to be demoed and the slab prepped, and whether DITRA-HEAT is going back in. The quote separates Schluter material from labor line by line so you can see what the membrane and waterproofing actually cost. Under Clause 1 of The Haven Standard, that price is written before anyone picks up a tool, and no change proceeds without a signed change order. The work carries the 365-Day Done Right Promise and a documented photo record of every layer before it’s covered.
DIY or Call Us?
You can safely do the diagnosis: press a paper towel against a suspect grout line to check for wicking, tap tile for hollow spots, look at the printed edge of the membrane, and photograph the efflorescence. Where it goes wrong is the repair itself. Rebuilding a KERDI shower pan or re-bonding DITRA means cutting out to sound substrate, matching the drain flange geometry, and getting a continuous waterproof layer with correct overlaps, and a seam that’s missed by an inch leaks exactly as much as no membrane at all. That’s not a weekend job done correctly, and redoing it a second time costs more than doing it once. Call (888) 836-5914 and we’ll come look, tell you what failed, and put a price in writing.
FAQs

How long does Schluter waterproofing last? A properly installed KERDI and DITRA system should hold for the life of the tile, 25 years or more, but in South Florida the variable is heat and humidity during install, not the product; thinset that skinned over before the membrane went down is what shortens that life in Hialeah. Call (888) 836-5914 for an exact quote on diagnosis and repair, free.
Can it be repaired instead of fully replaced? Sometimes, if the failure is isolated to one seam or a single curb, we can cut out the affected area and rebuild it; a membrane that has been letting water reach framing usually needs the section opened to check for rot. We’ll tell you which it is after inspection, not before. Estimates are free.
How long does the swap take? A localized membrane repair is a few days including cure and re-tile; a full shower pan rebuild on an ADU bath runs one to two weeks, and a whole-addition re-waterproofing is scoped into the larger project timeline. Call (888) 836-5914 and we’ll put the schedule in writing.
How do you source the Schluter part? We match the genuine Schluter membrane, band, and drain flange spec to your existing assembly through our vetted supply chain and confirm the product code against the roll’s printed edge before ordering, so the same failure doesn’t recur. We also work alongside KraftMaid, Cambria, and Silestone finishes when an addition is being finished out. Call (888) 836-5914 for a written price before work starts.
If you’ve got a damp grout line, a hollow tile, or a soft curb in a Hialeah addition, the useful next step is a look at what actually failed and a number on paper. Call Rowan Construction Group Hialeah at (888) 836-5914 for a free estimate, bring any prior written quote and we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












