







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Roofing: The Hialeah Owner’s Guide
We install and repair Schluter roofing systems across Hialeah, and most of the work lands in the $400 – $1,800 band for a repair and $8,000 – $20,000 for a full replacement when the underlying roof has failed. Schluter isn’t a shingle or tile brand in the way most Hialeah homeowners assume. It’s a system of waterproofing, drainage, and edge components (membranes, profiles, and trim) that sits under and around the finished roof surface, which means a Schluter failure usually shows up as water where it shouldn’t be, not as a missing shingle. Most owners discover the problem after a hard summer rain pushes water past a termination bar, or when a roofer pulls back the tile and finds the membrane beneath it has gone brittle.
Which Schluter Models This Applies To

Schluter’s roofing-adjacent lineup is broad, and the right part depends entirely on which component failed. The names you’ll see on packaging and labels include KERDI waterproofing membrane, KERDI-BAND seaming strip, KERDI-FIX adhesive, DILEX movement joints, SCHIENE edge profiles, TREP-E stair-nosing profiles, and RONDEC trim profiles. On the roof side, the components that fail most in Hialeah’s climate are the waterproofing membrane and its termination details, not the visible profiles.
To identify the correct part, look for the printed series name and dimensions on the roll or profile itself, then measure the actual width and depth. KERDI membrane ships in several widths, and a 5-inch roll won’t substitute for a wider one where coverage matters. The OEM-versus-aftermarket decision matters here: Schluter’s own membrane and banding are engineered as a matched system, and the fleece facing is what bonds to thin-set. A generic “equivalent” waterproofing sheet with a different fleece weight may not bond the same way, and on a Hialeah roof deck that difference is what fails first in the wet season. We match the part to the printed spec rather than to a photo.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Roofing Is Failing
- Water staining or damp patches on the ceiling below the roof edge. This usually points to a failed termination bar or a membrane seam that has lifted, letting water track under the profile.
- Brittle or cracked membrane visible with the tile or surface lifted. Florida’s UV load and heat cycling make the fleece and membrane backing stiffen over time, and a membrane that cracks loses its waterproofing function entirely.
- Lifted or separated KERDI-BAND seaming strips. Adhesive failure at a seam is the most common entry point, and it often looks fine from above until water finds it.
- Water pooling at a valley or low edge after rain. Schluter drainage components rely on slope and correct overlap; a profile installed without enough fall traps water and forces it back under the system.
- Visible corrosion or separation at metal edge profiles. Screw fasteners and trim can back out or corrode in salt-air conditions, opening a gap that the membrane alone can’t close.
Each of these is a symptom, not a diagnosis. The point of naming them is so you can describe what you’re seeing accurately when you call, which shortens the inspection.
Replacement Cost & What’s Included

Installed cost in Hialeah depends on how much membrane and trim has to come out, and whether the roof surface above it has to be removed to reach it. A localized membrane repair with re-termination typically runs in line with our roof repair range of $400 – $1,800. A broader waterproofing rebuild under tile or shingle can climb toward our tile roof repair range of $600 – $2,500, and if the deck itself is compromised, the work moves into roof replacement territory at $8,000 – $20,000.
What drives the range: how much of the surface must be opened, how many seams and terminations need redoing, the membrane width required, and whether the substrate (the deck material under the membrane) is sound or rotted. Our quote is a flat written price with a written scope, delivered before any work starts. No change proceeds without a signed change order. The work carries our 365-Day Done Right Promise, backed by The Haven Standard, and every visit includes a documented photo record so you can see what was found and what was replaced.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check the obvious things: look for water stains, feel for soft spots on the deck from inside, and note where water pools. Those observations are useful and cost nothing. Where DIY goes wrong is at the waterproofing layer itself. Correct membrane installation depends on surface prep, thin-set coverage, overlap direction, and termination detail, and a small error there doesn’t show up until the next heavy rain, often months later and after the surface has been closed back up. Working on a wet roof edge also carries fall risk, and opening a waterproofed assembly without the right materials to close it properly can make the leak worse.
If you’re seeing active water intrusion, the safer move is to get it inspected before you start pulling anything apart. Call (888) 836-5914 for a free estimate and we’ll document the condition in plain terms before recommending a repair.
FAQs

A properly installed Schluter membrane can last many years, but Hialeah’s UV exposure, heat cycling, and wet-season load shorten the service life of any waterproofing layer, and the seams and terminations fail long before the sheet itself does. The realistic lifespan depends more on installation quality and drainage than on the product name.
Often yes. A localized seam or termination failure is usually a repair, not a full replacement, and that’s the cheaper path when the membrane beneath is still sound. The only way to know is to open the surface at the failure point and inspect the membrane condition directly. Call (888) 836-5914 for a free estimate.
A focused membrane or termination repair is typically a one- to two-day job once the surface is opened, while a broader waterproofing rebuild under tile takes longer because the finish has to come off and go back on. You get the written scope and timeline before we start, and no change happens without a signed change order.
We match the part to the printed series name and measured dimensions on your existing component, then source the correct OEM spec through our vetted material suppliers. Schluter is one of fifty-plus brands we work with, alongside roofing lines like GAF and Owens Corning, and cabinet and stone brands like KraftMaid, Cambria, and Silestone when a project crosses trades. We don’t carry parts on a truck and we don’t claim stock; the part is ordered to your spec.
Talk to Us About Your Schluter Roofing in Hialeah
Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Schluter. If a Schluter component on your Hialeah roof has failed, we’ll inspect it, name the price range in dollars before anyone picks up a tool, and put the scope in writing. Our technicians have up to 19 years of experience, crews are background-checked and uniformed, and a live person answers calls around the clock. Call (888) 836-5914 for a free estimate, and bring any written estimate you already have for a free second opinion, reviewed line by line at no charge.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












