







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Home Additions & ADU: The Hialeah Owner’s Guide
If you’re planning a Cambria-surfaced addition or backyard ADU in Hialeah, the installed range runs $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU, quoted as a flat written price before anyone swings a hammer. Cambria is quartz, not stone with a grain you can edge-match later, so the slab layout, seam placement and edge profile have to be locked in at design, not improvised on site. Most Hialeah owners discover the problem when a fabricator quotes a seam that lands dead-center in the island view, or when a permitted sunroom turns out to need a countertop that meets Florida’s impact and moisture realities. We install Cambria-compatible additions and ADUs across Hialeah, and we’re an independent contractor, not affiliated with Cambria.
Which Cambria Models This Applies To

Cambria doesn’t sell “models” the way a garage-door opener does. It sells quartz slabs by collection and color name – Britannica, Ella, Torquay, Annicca, the list runs past a hundred designs – and the same color can shift slightly between production lots. That’s the first compatibility gotcha: if your addition’s plans call for a specific Cambria design, order all the slabs for that job from a single lot, or your island and perimeter counters may read a half-shade apart under Hialeah’s bright afternoon light. Second: quartz slabs come in standard dimensions (commonly 56×120 inches, in 2cm and 3cm thicknesses), and 3cm is the better choice for an island with a seating overhang that needs support. To identify what you have, check the fabricator’s sticker or the underside stamp on an existing piece, and measure thickness with a tape – 2cm vs 3cm changes the edge build.
The OEM-vs-aftermarket question doesn’t apply the way it does to a mechanical part. With Cambria you’re choosing a fabricator and an edge detail, and the material itself is the material. What matters is a written slab layout showing every seam before cutting.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Home Additions & ADU Is Failing
- Hairline cracks near a seam or sink cutout. Quartz is resin-bound, and a seam that wasn’t properly joined or a cutout without a support rail will stress and crack over time – common in additions where the cabinet run wasn’t leveled first.
- Chipping along the edge profile. A thin 2cm edge with a sharp profile chips at the corner; a bullnose or eased edge holds up better in a busy ADU kitchen.
- Discoloration or a cloudy patch. Quartz resists staining well, but heat from a hot pan set down directly, or prolonged UV through an unshaded Florida window, can dull the resin surface.
- Separation from the cabinet or wall. This is usually a substrate problem, not the slab – an addition whose framing or cabinet base shifted after the slab went down.
- A visible mismatch between adjoining slabs. Two different Cambria lots side by side, which shows up most in an open-plan addition where the kitchen and a butler’s pantry share sightlines.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Cambria is a design decision inside a larger build, so the honest number is the project range, not a single part. In Hialeah, a home addition runs $45,000 – $130,000; an ADU runs $90,000 – $220,000; a garage conversion that adds a kitchenette sits at $30,000 – $80,000. Within that, the countertop line typically tracks our standard countertop installation range of $2,000 – $6,500 per run, and a kitchen island install runs $3,000 – $10,000. The range moves on slab square footage, edge profile, seam count, and whether the room needs new cabinetry under it.
Every quote is a flat written price with a written scope before work starts. No work proceeds on a change until the change order is signed. The 365-Day Done Right Promise covers the installation, and every visit leaves you a documented photo record of what we found and what we did.
DIY or Call Us?
You can safely check a few things yourself: measure the slab thickness, photograph the underside sticker, note where cracks start, and confirm your cabinet base is level with a 4-foot level. What you shouldn’t attempt is cutting or installing Cambria. Quartz slabs run heavy – a 3cm slab over an island can weigh several hundred pounds – and they need two people, a proper lift, and diamond tooling. A dropped slab is a several-thousand-dollar loss, and cutting quartz dry releases silica dust that’s a genuine health hazard without wet-cutting and a respirator. Fabrication and install belong with a trained crew. Our technicians have up to 19 years of experience, and they handle the slab layout, seams and edge work so the finished install in your Hialeah addition matches the plan.
FAQs

How long does a Cambria countertop last in a Hialeah addition? Cambria quartz is a durable surface expected to last decades with normal care – it’s non-porous and doesn’t need sealing. The wear items are the seams and edges, not the slab itself, so a clean install is what earns the lifespan.
Can a cracked or chipped Cambria surface be repaired instead of replaced? Small chips and hairline cracks can often be filled and blended by a fabricator, but a crack running through a seam or a sink cutout usually means the piece should be replaced. Call (888) 836-5914 for a free estimate and we’ll tell you which one you’re looking at.
How long does the swap take? A single countertop run can be templated, fabricated and set in about one to two weeks once the slab is chosen. A full addition or ADU with Cambria surfaces runs weeks to months depending on permits and framing, and your written scope lays out the schedule.
How do you source the Cambria slab? We source through our vetted brand network and confirm the specific design and lot with you before cutting, so seams and shade match the plan. Bring a competitor’s written estimate and we’ll review it line by line at no charge.
Ready to price your Cambria-surfaced addition or ADU in Hialeah? Call Rowan Construction Group Hialeah at (888) 836-5914 for a free estimate. We also work with KraftMaid, Silestone and Kohler, plus the rest of our fifty-plus vetted brands.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












