







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Driveway & Pavers: The Hialeah Owner’s Guide
Cambria doesn’t make driveway or paver material, and that’s the first thing to get straight. Cambria is a quartz surfacing brand, made in Le Sueur, Minnesota. What Hialeah owners actually mean when they search this page is one of two things: a Cambria-surfaced walkway or entry inlay set into a paver driveway, or a driveway and pavers project being planned alongside a Cambria kitchen or countertop job through the same contractor. Rowan Construction Group Hialeah handles both under one written price. Paver driveway installation in Hialeah runs $7,000 – $18,000, and paver patio work runs $3,500 – $11,000, with a written scope and flat price before anything gets dug out.
Owners usually land here the same way. The quartz inlay at the front step has cracked, or the pavers around it have heaved after a wet season in Hialeah, and the joint between the two materials holds water it never used to. Paver edges settle, sand works out of the joints, and a driveway that looked flat two summers ago now pools a half-inch of rain against the garage sill. That’s the symptom picture. Under Clause 1 of the Haven Standard, we put the price in writing before work starts, every time.
Key Takeaways
- Cambria is quartz surfacing, not a paver brand; we set and repair Cambria inlays inside paver driveways and walkways.
- Installed paver driveway work in Hialeah: $7,000 – $18,000. Driveway sealing: $250 – $700.
- Florida weather is the driver: drainage, sun, and the afternoon rain cycle across Hialeah beat up joints faster than most of the country.
- Written flat price and written scope before any work. No change without a signed change order.
- Rowan Construction Group Hialeah is an independent service provider, not affiliated with Cambria.
Which Cambria Models This Applies To

On the paver side, Cambria’s role is surface, not structure. Cambria quartz is a slab format with standard thicknesses around 1, 2, and 3 centimeters, and it sits fine in a non-load-bearing context: a front entry landing, a walkway inlay, a patio border, the step cap at a garage transition. It is the wrong choice for anything that has to take vehicle weight across a span, which is why on a Hialeah driveway the quartz sits in a framed inset over a concrete or properly compacted base, never as a floating pavers substitute. Cambria is sold through fabricators and slab yards rather than as a catalog part, so the way you identify what you have is by slab, not by model number: a fabricator usually stamps the underside or records the bundle, and measuring slab thickness and edge profile tells you more than any tag will if the tag is gone.
The pavers side has real model families: Belgard and Techo-Bloc are the brands we source through vendors, each with their own series of interlocking units and color blends. When you’re matching a replacement piece to existing pavers, the model name and color line matter more than the dimensions on the box, because color lots shift between manufacturing runs. Hialeah owners run into this constantly: a paver ordered as “the same” as what’s underfoot shows two shades off in direct sun. Bring a loose paver or a photo in daylight, and we’ll match the family and the color line before ordering.
On the OEM-versus-aftermarket question for Cambria, the honest answer is there isn’t a genuine/aftermarket split the way there is for a car part. Cambria is one mill’s quartz. What exists is the fabricator quote versus the imported quartz quote, and the imported options from Silestone and Caesarstone are legitimate, different materials with different price points and different behavior. A Cambria quote will carry a Cambria number.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Driveway & Pavers Is Failing
Most failing driveway and paver jobs in Hialeah show two or three of these at once, not just one.
- Heaving near the garage apron. The base compacted under the pavers wasn’t deep enough, or the water table and runoff are working the sub-base. If a paver rocks underfoot, the bed has lost support.
- Sand washing out of the joints. Polymeric sand breaking down from sun and rain. Once it’s gone, water gets under the surface and the next step in the failure shows up fast.
- Standing water after a storm. Hialeah’s afternoon rain cycle sits in whatever low spot it can find. A low spot means slope, base, or drainage was missed at install, or the pavers have moved.
- Cracks in the Cambria inlay. The quartz cracked because whatever it sits on flexed, or the edge joint was set tight with no relief. A crack in the slab is a base problem showing through the surface.
- Efflorescence (white salt staining). Water pushing through the pavers from underneath and reacting with the mix in the base. It looks like surface dirt but the cause is below.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the number looks like in Hialeah, broken out by scope:
| Scope | Installed price range |
|---|---|
| Paver driveway installation (full run) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (existing dug out) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway (for comparison) | $4,500 – $12,000 |
What drives the range: total square footage, whether the existing surface gets removed or sits as a base, how deep the base has to go to hit stable soil, drainage corrections, and whether the Cambria inlay is a set-piece or a complex shape. Cambria is priced separately as a slab on top of the paver scope; a 2-centimeter Cambria slab for a front walkway inlay is not a small line item, and we quote it as its own line.
On every quote: a flat written price, a written scope, the material list with the brand and series named, and the 365-Day Done Right Promise. If it’s not done right, we make it right. Bring a competitor’s written estimate and we’ll review it line by line at no charge through the Free Second Opinion. No work proceeds on a change without a signed change order, which is how projects stay within a few percent of the agreed number.
DIY or Call Us?
There’s a real split here. What you can safely check on your own: walk the paver field and note where it rocks, look for low spots by hosing down the driveway and watching where the water sits, sweep the joints and see how much sand falls out, and photograph the Cambria inlay from a few angles so you can see cracks and joint separation in daylight.
Where DIY goes wrong: re-sanding joints without fixing the base, patching a low spot by adding pavers on top, or trying to lift and reset pavers around a Cambria inlay. That last one is the dangerous one. A 2-centimeter Cambria slab is heavy and slippery, and the wrong pinch under a lifted piece can land squarely on a hand or a foot. Do not lever a quartz inlay on your own. The base prep and the reset are jobs for a crew with the right edging and tamping gear.
We work with background-checked, uniformed technicians, and every visit includes a documented photo record of what we found and what we did, included as standard. Call (888) 836-5914 for a free written estimate.
FAQs

A properly set paver driveway commonly runs 20 to 30 years; a Cambria quartz inlay on a stable base runs the life of the surrounding installation. The failures we see in Hialeah are almost never the material. They’re the base and the joint maintenance. Reseal every two to three years and you stretch the surface life. Call (888) 836-5914 for a free estimate on repairs or a full install.
Often yes. If the failure is sand washout, a few lifted pavers, or one cracked slab of the Cambria inlay, we can reset the pavers, re-set the inlay, and re-sand joints without tearing out the driveway. We tell you honestly on the visit whether repair or replacement is the better spend. Call (888) 836-5914 for a free estimate.
A repair or a small inlay reset runs one to two days. A full paver driveway rebuild typically runs three to five days on site, plus material lead time for pavers and any Cambria slab the fabricator has to cut. You get the schedule in the written scope. Call (888) 836-5914 for a free estimate.
Cambria comes through fabricators and slab yards, so we get the slab ordered and cut to the inlay dimensions from a Cambria yard. Pavers come through our vendor network from brands like Belgard and Techo-Bloc, matched to your existing color line. For a Cambria countertop or bath surface job alongside, we also handle KraftMaid, Silestone, and Kohler through the same written quote. Call (888) 836-5914 for a free estimate.
Rowan Construction Group Hialeah works across seven trades, from Driveway and Pavers through Kitchen Remodeling and Home Additions, under the Haven Standard: written price first, signed change order for any change, documented photo record on every visit, and the 365-Day Done Right Promise. Our technicians have up to 19 years of experience. We’re an independent service provider, not affiliated with Cambria. Call (888) 836-5914 for a free written estimate on your Hialeah driveway and paver project.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












