







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The Hialeah Owner’s Guide
We build KraftMaid-compatible home additions and ADUs in Hialeah, and a finished addition with KraftMaid cabinetry and storage runs $45,000 – $130,000 for the addition scope, with a standalone ADU at $90,000 – $220,000. These are planned builds, not same-day work: a written, flat price and written scope land before anyone picks up a tool. In Hialeah, owners usually discover a KraftMaid problem the same way, one hinge at a time. A cabinet door in a new addition starts hanging low, the soft-close drawer stops catching, or a pantry pull-out binds against the frame six months after the build. By the time you’re reading this, you’ve probably already tightened a screw and watched it work loose again.
Rowan Construction Group is an independent service provider. We are not affiliated with KraftMaid, and we say so plainly.
Key Takeaways
- Addition scope in Hialeah runs $45,000 – $130,000; a full ADU runs $90,000 – $220,000.
- KraftMaid box, door and drawer hardware is model-specific – the part number matters more than the brand name.
- Hialeah’s humidity is the leading cause of cabinet and hardware failure in new additions, not heavy use.
- You get a flat written price and written scope before work starts, and no change proceeds without a signed change order.
Which KraftMaid Models This Applies To

KraftMaid cabinetry shows up in additions and ADUs in two broad families: the framed lines (Vantage is the entry framed series) and the frameless lines, where the box has no face frame and the door sits flush against the cabinet edge. The distinction matters because the hardware, the filler strips and the panel sizing all change between them. A frameless door hinge will not fit a framed box, and the reverse is just as true.
To identify the right part, start inside the cabinet, not on the showroom floor. Open the door and look at the interior side wall for the series label and a model or part sticker. Failing that, measure the door or drawer front and note the overlay – the amount the door covers the cabinet opening. KraftMaid’s overlay dimensions are specific, and a generic “fits most” hinge bought off a shelf will usually sit proud or bind. On the OEM-versus-aftermarket question, our honest answer: for visible doors and drawer fronts, the OEM KraftMaid part is worth the wait because finish and grain matching only work within the same line. For concealed hinges, drawer glides and soft-close dampers, a quality aftermarket equivalent from a known hardware maker performs as well and costs less. We source across more than fifty vetted brands, and we’ll tell you which parts are worth the OEM premium in a Hialeah build and which aren’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Home Additions & ADU Is Failing
Cabinet and hardware failure in a Hialeah addition rarely happens all at once. It shows up in small ways first. Here’s what to watch for and what’s usually behind it.
- Doors that hang low or rub the frame. The hinge plate screws have loosened in the particleboard or plywood side wall, often because the humidity swells the substrate and the screws lose their bite.
- Soft-close drawers that no longer close softly. The damper inside the glide has worn out. It’s a small, replaceable part, not a reason to replace the whole drawer box.
- A pantry or corner pull-out that binds halfway. The glide is out of alignment or the cabinet box has shifted, which is common in additions where the wall settled slightly in the first year.
- Swollen or delaminating shelf edges. This is a moisture problem, and in Hialeah it usually traces to a poorly sealed addition envelope or a kitchenette with no exhaust, not to the cabinet itself.
- Sagging shelves under weight. Standard shelf pins in a wide cabinet can’t carry heavy pots or appliances. A shelf-pin upgrade or a mid-support is the fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what addition and ADU work runs in the Hialeah market, with the cabinet and hardware scope built into the number rather than bolted on afterward.
| Scope | Installed price range (Hialeah) |
|---|---|
| Home addition (full scope) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
The range is driven by square footage, whether you’re building up or out, the foundation and roof tie-in, and the extent of the KraftMaid cabinet and storage package. Parts and labor are quoted as separate written line items, so you can see what each piece costs. Every job carries the written warranty, and the 365-Day Done Right Promise backs the work: if it isn’t done right, we make it right. Under Clause 1 of the Haven Standard, the price is written before anyone starts.
DIY or Call Us?
Some of this you can safely check. Swapping a soft-close damper, replacing a shelf pin, or tightening a loose hinge plate with the right screw and a small amount of wood glue is within reach of a careful homeowner. Where DIY goes wrong is diagnosing the cause. A door that keeps sagging after you tighten the screws is telling you the substrate has failed, and re-driving screws into swollen particleboard makes it worse, not better. The bigger warning: any work that touches the addition envelope – cutting into a wall to fix a shifted cabinet box, addressing the moisture that swelled a shelf – can compromise waterproofing and ventilation if it isn’t done to spec. That work belongs with a trained professional who can read the whole build. When you’re ready for a straight answer and a written price, call (888) 836-5914 for a free estimate and a free second opinion on any written quote you already have.
FAQs

Quality KraftMaid cabinets hold up well for a decade or more, but hardware – glides, hinges, dampers – typically gives out first, often within five to eight years, because Hialeah’s humidity accelerates wear on moving parts and swells the substrate they anchor to. Call (888) 836-5914 for an exact quote; estimates are free.
Often, yes. Worn soft-close dampers, a single misaligned glide and loose hinge plates are frequently repairable without replacing a door or drawer box, and the repair is dramatically cheaper than a new cabinet. A failed or swollen cabinet box is the case where replacement makes sense.
Replacing a hinge set or a drawer glide is usually a same-visit job measured in minutes per part, not days. Larger scope – re-aligning a whole bank of cabinets or addressing moisture behind an addition wall – depends on what we find, and you’ll have a written scope before we start.
We identify the series and model from the cabinet’s interior label and the door overlay, then match the part to that spec – OEM for finish-critical doors and drawer fronts, a quality aftermarket equivalent for concealed hardware where it performs as well. We also carry Cambria, Silestone and Kohler in our material mix, so cabinet, counter and fixture choices line up in one written quote.
Rowan Construction Group brings more than fifty vetted brands and a written price to every Hialeah addition. Our technicians have up to 19 years of experience, crews are background-checked and uniformed, a live person answers calls around the clock, and every visit includes a documented photo record as a standard deliverable. Call (888) 836-5914 to schedule your free estimate.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












