







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Hialeah Owner’s Guide
We install KraftMaid-compatible kitchen cabinetry and handle the full remodeling scope around it in Hialeah, with cabinet installation running $4,000 – $13,000 and full kitchen remodels $14,000 – $45,000. Most Hialeah owners call us after a specific failure: a KraftMaid soft-close drawer that stops latching, a door hinge that sags and won’t hold adjustment, or a cabinet box that has swelled at the toe kick after a wet season. The part itself is usually small and cheap. What drives the decision is whether the box behind it is still sound, especially in Hialeah homes where humidity runs high most of the year.
Key Takeaways
- Cabinet installation in Hialeah: $4,000 – $13,000. Full kitchen remodel: $14,000 – $45,000.
- KraftMaid hinge and glide failures are usually part problems, not cabinet problems. Diagnose before you replace.
- We’re an independent service provider. We’re not affiliated with KraftMaid, but we know the product line.
- Written flat price and written scope before any work starts. No change without a signed change order.
Which KraftMaid Models This Applies To

KraftMaid sells through its own dealer network under several collected lines, and the cabinet’s construction tells you which hardware family you’re dealing with. The two things to identify before ordering any part: the hinge brand stamped on the hinge cup, and the drawer glide system (side-mount, under-mount, or a full-extension soft-close slide). KraftMaid has used different hardware suppliers across production years, so a door built in 2012 may take a different hinge than one built in 2019 even within the same door style.
The label inside the sink base cabinet is your best identification. It carries the cabinet’s model and finish code. Photograph it before you call anyone. If the label is gone, measure the door’s overlay – full overlay versus partial overlay changes which hinge fits – and measure the drawer box depth.
For KraftMaid specifically, OEM replacement parts come through dealer channels with lead times that can run two to six weeks depending on the part. Quality aftermarket equivalents from established hardware makers fit the same bore patterns and cost less, but they don’t always match the original. The trade-off is honest: OEM for a color or finish match, aftermarket for a functional glide or hinge failure where speed matters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
These are the failures we actually see, and what’s usually behind them.
- Doors that sag and won’t hold adjustment. The hinge plate has worn or the screws have stripped out of the cabinet frame. Stripped screw holes are common in particleboard core boxes after repeated adjustment.
- Drawers that close hard or won’t stay shut. Either the glide is failing or the drawer box is out of square. A soft-close mechanism that stops dampening is a glide replacement, not a box replacement.
- Swelling at the toe kick or around the sink base. Moisture has reached the core. In Hialeah, this shows up most around the sink and dishwasher where humidity and small leaks meet.
- Doors that rub on the frame when opened. The cabinet box has shifted out of square, often from a floor or wall movement rather than the door itself.
- Peeling or bubbling finish on door faces. Usually a finish failure on a thermofoil door, not something a part swap will fix. Door replacement is the real answer.
We note each of these in a photo record at the first visit, so the scope and price reflect what’s actually wrong.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Cabinet installation in Hialeah runs $4,000 – $13,000. A full kitchen remodel with KraftMaid cabinetry and new countertops runs $14,000 – $45,000. A small kitchen remodel lands at $9,000 – $20,000. Countertop installation is $2,000 – $6,500, a backsplash adds $800 – $2,500, and a kitchen island runs $3,000 – $10,000.
The range is driven by cabinet count, door style, box construction, and whether the layout changes. Moving a sink or range means plumbing and electrical, which is what pushes a job from the cabinet-only number into the full remodel band. We source KraftMaid-compatible cabinetry alongside Cambria and Silestone countertops and Kohler fixtures, so the written quote carries honest numbers rather than inflated ones.
Every visit includes a documented photo record and a written warranty on the work. Under Clause 1, the price is written before anyone starts, and no change proceeds without a signed change order.
DIY or Call Us?
There’s no high-tension or electrical danger in cabinet hardware, so some of this is fair for a careful homeowner. You can safely photograph the cabinet label, measure the door overlay, tighten a loose hinge screw with a longer screw, and replace a single soft-close glide on a side-mount drawer. Those are real, low-risk fixes.
Where DIY usually goes wrong: forcing a hinge into a stripped hole, which enlarges the damage, and replacing a glide without matching the drawer box depth, which leaves the drawer misaligned. When the box itself is swollen or out of square, no part will fix it and you’ll spend twice. If the diagnosis is unclear, call (888) 836-5914 and we’ll tell you honestly whether it’s a part or a box. A free second opinion on any written estimate is standing, too.
FAQs

Soft-close hinges and glides typically run 8 – 12 years before the dampening fails. In Hialeah’s humidity, cabinet boxes see more moisture cycling than in drier markets, which shortens the life of particleboard-core components near sinks and dishwashers. Call (888) 836-5914 for an exact quote on replacement – estimates are free.
Often yes. A stripped screw hole can be filled and redrilled, and a worn hinge plate can sometimes be re-tensioned. A failed soft-close cartridge cannot be rebuilt, only replaced. We’ll tell you which one you have before any work is priced.
A single hinge or glide swap is a same-visit job, usually under an hour. A full-kitchen hardware replacement typically runs a half day to a full day depending on cabinet count. The written scope states the time before we start.
From the cabinet label and the hardware brand stamped on the hinge or glide, matched to the production era. We compare OEM lead time against a quality aftermarket equivalent and give you both options in writing, so you choose based on fit, finish match, and how soon you need it.
Call Rowan Construction Group Hialeah at (888) 836-5914 to schedule your free estimate. We’ll identify the part, tell you what’s actually failing, and put the price in writing before any work starts.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












