







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in North Miami Beach, FL
We provide independent Dvele construction service across North Miami Beach, from panel-to-foundation connections and marriage-line tie-downs to HVHZ-compliant impact openings. What separates our Dvele work here from anywhere else in South Florida is the paperwork: every opening in ZIP 33160 has to carry a matching Miami-Dade Notice of Acceptance number, and we treat that as part of the build, not an afterthought. Our technicians have up to 19 years of experience with modular and factory-finished assemblies. Call (888) 836-5914 to set up a free estimate.
Why North Miami Beach Residents Choose Us for Dvele Service

Dvele builds modular, factory-finished homes and additions. The modules leave the factory at exact tolerances, then meet a site that was poured, cured, and settled under coastal conditions. That interface is where the real work lives, and it’s where our crews spend most of their time on Dvele construction in North Miami Beach.
We read Dvele’s own documentation before we touch anything: the module’s approval set, the panel connector schedule, the glazing schedule with its approval numbers. Dvele service isn’t site-built framing with a different label. The components are proprietary, the tolerances are tighter, and the approval trail matters as much as the torque wrench.
Parts sourcing follows the same logic. Panel connectors, factory glazing units, and mechanical components come through Dvele’s own channel so the envelope and its approvals stay intact. Generic hardware only goes in where a code-compliant, HVHZ-approved equivalent exists and we can show the paperwork. We don’t claim local stock; each job is sourced to its spec.
We work throughout the North Miami Beach service area, inland blocks and Intracoastal towers alike.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in North Miami Beach
- Marriage-line seams opening under differential settling. North Miami Beach’s coastal-inland soils and slab interfaces let minor movement show up first at the joint between modules and around factory-installed openings. Salt-laden humid air finds those seams fast. We verify tie-down torque, re-seal, and check the corrosion protection on every fastener at the marriage line.
- Factory glazing that fails on paperwork, not installation. A Dvele module ships with its own window assemblies. Change or add an opening in 33160 and the new unit needs a Miami-Dade NOA. A sound install with the wrong approval number stalls inspection every time. We match the NOA before the unit goes in.
- Roof-to-wall tie-downs degrading in Intracoastal salt air. HVHZ wind-load rules make the module joint the weak point. If the on-site tie-downs aren’t torqued and protected against salt corrosion, uplift and water intrusion appear at that seam first, usually after the first storm season.
- Utility chase chafing at site-built connections. Factory-routed plumbing and electrical chases rub or strain where they meet site connections. Coastal humidity accelerates corrosion at any fitting not specified stainless or coated. We inspect the chases and replace site-side fittings that weren’t spec’d for the environment.
- Additions and ADUs built against older ranch slabs. Many 1950s-70s single-family blocks sit on original slabs that never anticipated a modular load path. We check the foundation interface before quoting, because a module addition on a tired slab needs remediation first.
Dvele Service in North Miami Beach: What Local Conditions Mean for Your Equipment

Here’s the fact that shapes every Dvele job in North Miami Beach: the city’s 40-year recertification clock and Miami-Dade’s High-Velocity Hurricane Zone “NOA-only” rule combine into a single standard. Any Dvele module addition or opening change in ZIP 33160 is judged on whether every opening carries a matching Miami-Dade Notice of Acceptance number. Not a Florida product approval. A Miami-Dade NOA, matching the specific unit, on file, ready for the inspector.
On the inland side, that plays out on 1950s-70s ranch remodels where a family adds a Dvele module and swaps windows at the same time. Along the Intracoastal and Biscayne Boulevard corridor, it plays out on mid- and high-rise towers where concrete restoration and impact glazing are driven by a mandatory inspection date. One jurisdiction enforces both. A paperwork gap sinks otherwise-finished work at inspection, and that’s the failure we see most often in North Miami Beach.
Dvele Models & Products We Service in North Miami Beach
We work on Dvele’s single-family modular homes, delivered panelized or volumetric; Dvele ADU and guest-house modules; and Dvele net-zero-ready homes with the integrated solar-ready roof and mechanical package. Each line has its own connection details and approval set, and we pull the right one before quoting.
For proprietary panel connectors, glazing units, and mechanical components, we source through Dvele’s own parts channel so the envelope and its approvals stay intact. Generic hardware substitutes only where a code-compliant, HVHZ-approved equivalent exists. Repair is usually the right call on seams, tie-downs, and site-side fittings. A full re-clad or window-package upgrade makes sense only when the existing assembly can’t carry a current NOA.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in North Miami Beach

Prices below are market-calibrated for the North Miami Beach area. Every quote is a flat written price with a written scope before work starts, and no change proceeds without a signed change order.
| Service | Price Range |
|---|---|
| Home Addition (Dvele module add-on) | $53,100 – $153,400 |
| ADU Construction (Dvele module) | $106,200 – $259,600 |
| Impact Window Installation | $9,440 – $29,500 |
What drives cost: foundation remediation at the slab interface, the number of openings requiring new NOA-matched units, tie-down and corrosion work at the marriage line, and utility chase rework. A free estimate includes a foundation interface check, tie-down and seam inspection, and a photo record of what we found. We’ll also review a competitor’s written quote line by line at no charge. Call (888) 836-5914 for an exact quote.
Serving North Miami Beach, FL – Our Local Coverage Area
We serve North Miami Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in North Miami Beach
Yes. Every opening in a Dvele addition in North Miami Beach must carry a matching Miami-Dade Notice of Acceptance, because ZIP 33160 falls inside the High-Velocity Hurricane Zone. A factory-standard unit installed without that paperwork stalls inspection even when the install is sound. We verify the NOA number before any unit goes in. Call (888) 836-5914 to have your approval set reviewed.
It sets a hard inspection date. At recertification, inspectors check structural integrity, concrete condition, and every opening’s approval documentation. For a Dvele module, that means the marriage-line tie-downs, foundation interface, and glazing NOAs all have to be ready. We pull the module’s approval documents and verify the connections before the inspection deadline.
Salt-laden humid air off the Intracoastal, intense UV, and a June-to-November storm season all work on the same seam. Factory-set tolerances meet coastal-inland slab movement, and the joint opens just enough for moisture to enter. Corrosion-resistant fasteners and proper tie-down torque at the marriage line are what hold that seam closed. Call (888) 836-5914 to schedule a seam inspection.
Usually yes, but the original slab and foundation interface have to be checked first. Many inland North Miami Beach ranch lots sit on slabs poured decades before a modular load path was ever considered. We inspect the substrate and quote any remediation as part of the written price. Estimates are free; call (888) 836-5914.
For proprietary panel connectors, glazing units, and mechanical components, Dvele’s own parts channel keeps the envelope and approvals intact. Aftermarket or generic hardware works only where a code-compliant, HVHZ-approved equivalent exists and the paperwork can be produced. We tell you which is which before quoting.
Service Areas Near North Miami Beach
We work Dvele modules and impact glazing across the surrounding communities too: Golden Glades, North Miami, Hialeah, Miami Springs, Opa-locka, Westview, West Little River, and Gladeview. Same HVHZ rules, same NOA paperwork, same written-price discipline.
Book Your Dvele Service in North Miami Beach Today
Call (888) 836-5914 to schedule your free estimate for Dvele construction in North Miami Beach. We’ll pull the module’s approval documents, check the foundation and tie-downs, and give you a flat written price before any work starts. A live person answers calls 24/7, and every visit includes a documented photo record.
Written by the team at Rowan Construction Group.












