







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Pinewood, FL
We provide independent Unilock service across Pinewood, installing Brussels Block, Beacon Hill, Elegance and Olde Quarry products to Miami-Dade’s HVHZ product-approval rules. What makes our Unilock work here different: on Pinewood’s older non-conforming lots, pavers rarely sit on a clean permitted footprint. They have to work around unapproved carport slabs, tie-beam retrofits and rain dumping off low-slope roofs. We are not Unilock-authorized, partnered or warranty-endorsed. We know the product line and how it behaves in South Florida sun, salt and hurricane wind, and we quote a written price before any work starts. Call (888) 836-5914 for a free estimate.
Why Pinewood Residents Choose Us for Unilock Service

Unilock pavers and wall units are engineered products, and they fail in predictable ways when the base, drainage or edge restraint underneath them is wrong. That’s the part we focus on. We work with Unilock’s actual model families – the Brussels Dimensional System for driveways, smooth-slab Beacon Hill, the tumbled Elegance and Trellis series, and Olde Quarry and Lineo wall units – and we source color-matched OEM pavers, edge restraints, caps and step units so blends stay consistent when only part of a run is reset.
Pinewood is a small, historically Black community in the 33167 corridor, and most of the paving work here is infill and renovation on a tight, older plat. We plan every Pinewood job around that: narrow interior streets, tight equipment access, and existing structures we don’t get to assume were permitted. Our technicians have up to 19 years of experience, and every visit comes with a documented photo record of what we found and what we did – standard, not an upgrade. Call (888) 836-5914 and a live person will schedule your estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Pinewood
- Efflorescence on gray Brussels Block and Beacon Hill pavers. Miami-Dade humidity is near-constant, and the white salt bloom shows up fastest when polymeric joint sand goes down over a damp, poorly compacted base. The fix is drainage and base correction, not a surface wash.
- Joint sand washout and lateral paver creep after June-November rain. This is common where older Pinewood lots drain toward a flat-roof or carport slab instead of the street. Water has nowhere to go, so it pushes sand out of the joints and shifts pavers sideways.
- Edge restraint failure and base settlement. We see this along unpaved property lines and unpermitted driveways where the sub-base was never excavated to Miami-Dade depth or compacted in lifts. Once the edge gives, the field follows.
- UV fading and surface chalking on pigmented pavers and wall units. Full-sun exposures and salt-laden air off nearby Biscayne Bay dull light-colored Beacon Hill and Elegance surfaces faster than inland installations.
- Poor transitions against retrofit structures. New paver fields meeting older tie-beam retrofits and unpermitted slabs need careful elevation work so water still sheds away from the house. Getting this wrong is where most callbacks start.
Unilock Service in Pinewood: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes Unilock work in Pinewood more than anything else: much of the paving sits on non-conforming platted lots with unpermitted carports and prior additions, so paver driveways and patios often have to be laid out and drained around pre-existing unapproved slabs and tie-beam retrofits rather than a clean, permitted footprint. That changes everything about how a Unilock installation is planned. You can’t simply grade to the street when an old carport slab interrupts the fall line. You can’t count on the house-side elevation matching the drawings when an unpermitted addition moved the wall out two feet. On a Pinewood lot, drainage and layout are designed around what’s already there. We verify what exists, confirm code compliance before adding square footage, then excavate and recompact the base to Miami-Dade depth so the Unilock product performs the way it was engineered to.
Unilock Models & Products We Service in Pinewood
We install and service the Brussels Block and Brussels Dimensional System, Beacon Hill smooth slabs, the Elegance and Trellis paver series, and Olde Quarry and Lineo wall units. For repairs we use OEM Unilock color-matched pavers, edge restraints, caps and step units so existing blends and profiles stay consistent. Quality aftermarket polymeric sands and base aggregates are fine where they meet Miami-Dade product approval. We don’t claim local stock – parts for each Pinewood job are sourced to the specific model, color and size on your property, which is why we confirm quantities and dye lots before the crew mobilizes. Repair is usually the honest call for localized settlement; a full re-lay only makes sense when base failure is widespread.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Pinewood

Every Pinewood project gets a flat written price and a written scope before anyone picks up a tool. Here are the ranges you can compare against:
| Service | Price range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
Cost is driven by base excavation depth, how much old slab or failed base has to come out, drainage corrections, and the specific Unilock model. Your free estimate includes a site walk, a base and drainage assessment, and a written line-item quote. Call (888) 836-5914 for an exact price – estimates are free.
Serving Pinewood, FL – Our Local Coverage Area
We serve Pinewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Pinewood
Yes, in practice. Pinewood’s non-conforming lots and unpermitted carport slabs mean the base often has to be excavated and recompacted around existing structures rather than laid on a clean, graded footprint. Call (888) 836-5914 for an exact quote – estimates are free.
They will when the base, edge restraint and drainage are built to Miami-Dade’s HVHZ product-approval requirements. Wind-driven rain and runoff, not the paver itself, are usually what cause failure. Call (888) 836-5914 to schedule your free estimate.
That’s efflorescence plus joint sand washout, and it almost always traces back to a damp, poorly compacted base and inadequate drainage. Resetting, re-sanding and re-restraining is usually the honest fix. Call (888) 836-5914 for a free second opinion on any written estimate.
We source OEM Unilock color-matched pavers and edge restraints to keep blends and profiles consistent, which is why we confirm dye lots before mobilizing. Call (888) 836-5914 for an exact quote – estimates are free.
It usually does. Existing unapproved slabs and tie-beam retrofits change how a paver field is laid out and drained, and code compliance often has to be addressed before new square footage goes in. Call (888) 836-5914 for a free estimate and we’ll walk the site with you.
For more on the products we work with, see our Unilock service page.
Service Areas Near Pinewood
We serve Pinewood and the surrounding communities of Hialeah, Miami Springs, Opa-locka, Westview, West Little River and Gladeview. If you’re in or near Pinewood service area, we can schedule a free estimate.
Book Your Unilock Service in Pinewood Today
Call (888) 836-5914 to schedule your free Unilock estimate in Pinewood. A live person answers, and we’ll come out, assess the base and drainage, and put a written price in your hands before any work starts. You’ll also get a documented photo record of what we found.
Written by the team at Rowan Construction Group.












