







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Gladeview, FL
We’re an independent Mr-Glass specialist serving Gladeview, not a manufacturer-affiliated dealer or an authorized agent of the brand. That independence matters here for one reason: Gladeview sits in unincorporated Miami-Dade, so every window and door replacement runs through the county’s High-Velocity Hurricane Zone rules, and we recommend the Mr-Glass product that passes inspection in your ZIP code (33147) rather than the one a factory wants us to push. Call (888) 836-5914 for a free written estimate.
Why Gladeview Residents Choose Us for Mr-Glass Service

We work on Mr-Glass products constantly, which means we know their failure patterns before we open the frame: seal fogging on the Impact Series, gasket shrinkage on StormGuard sliders, and drainage problems that show up years after a careless install. Our technicians have up to 19 years of experience, and we bring that to every Gladeview job with OEM-compatible parts and a written scope before we touch anything.
Gladeview’s housing stock is a specific kind of challenge. Most homes here are 1950s and 60s concrete-block and stucco, many with original openings that have shifted, settled, or been patched over the decades. A modern Mr-Glass unit drops cleanly into some of those frames and needs careful shimming and flashing in others. We measure the actual rough opening rather than trusting the old window’s dimensions, and we say so on the quote. That’s part of how we keep Gladeview projects within a few percent of the number you agreed to.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Gladeview
- Sealed-unit failure from sun exposure. Gladeview gets relentless subtropical sun, and Mr-Glass impact units that have spent 15-plus years facing west or south often fog between the panes. That haze isn’t cosmetic; the desiccant is spent and the unit is no longer insulating. We confirm it’s the glass and not a venting issue before recommending a swap.
- Missing or blocked weep holes. Original installs sometimes omitted drainage channels or worse, caulked them shut. In Gladeview’s summer downpours, water pools in the sill track and finds its way inside. We clear or retrofit the drainage so the frame sheds water the way it was designed to.
- Wind-load compliance gaps. Non-permitted replacements from before a sale can leave a Gladeview home with glazing that doesn’t meet HVHZ product-approval numbers. That becomes a real problem at inspection or insurance renewal. We check the product approval on the existing unit and tell you plainly whether it holds up.
- Cracked glass after storm debris. Hurricane-season wind throws palm fronds and roof gravel against glazing. A cracked lite in a Mr-Glass StormGuard frame often means replacing the glass unit rather than the whole assembly, which saves the frame and a lot of money.
- Sticking sliders and failed rollers. Heat and humidity swell frames and corrode hardware on ClearView and ThermaLine sliders across Gladeview’s low-rise apartments and single-family homes. New rollers and adjusted tracks usually restore smooth operation without a full replacement.
Mr-Glass Service in Gladeview: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every Mr-Glass job in Gladeview: because the neighborhood is unincorporated, there’s no city building department to walk into. Every window or door replacement is permitted through Miami-Dade County’s digital portal, and the submittal has to carry a product-approval number that meets High-Velocity Hurricane Zone standards. We’ve seen Gladeview projects stall for weeks because a contractor submitted specs for a product approved for the wrong wind zone or an outdated approval that had been superseded. On a 1960s block home off Northwest 17th Avenue, that delay can push an install straight into the heart of hurricane season. We verify the approval number before the order goes in, pull the permit ourselves, and schedule the inspection so the work closes out clean. It’s the kind of paperwork discipline that separates a finished job from an open permit sitting on your property record.
Mr-Glass Models & Products We Service in Gladeview
We handle the full Mr-Glass window and door lineup you’re likely to find on a Gladeview home: the Impact Series for full hurricane protection, StormGuard for storm-rated assemblies, ClearView for clear-glazed sliders and fixed units, and ThermaLine for thermal performance. Our parts approach is simple. We source OEM components whenever they’re available, which protects your warranty and keeps performance where the factory set it. For older or discontinued Mr-Glass lines, we fit high-quality aftermarket parts that meet or exceed Florida wind-load and impact standards, and we tell you which route we’re taking and why on the estimate. No local parts warehouse claims here; we source per job.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Gladeview

Two numbers cover most of the work we quote in Gladeview. Full impact window installation runs $8,000 to $25,000 depending on window count, opening sizes, and how much frame retrofitting an older block home needs. Standard window replacement runs $4,500 to $15,000. Repair work begins at $400 to $1,800 for a single failed unit or hardware fix; a storm-damage callout to secure broken glazing typically falls in the same band, with the exact figure depending on how many openings are affected. Tile and impact repairs follow the same logic: the more units and the more frame work, the higher the number.
A free estimate includes a measured survey of every opening, a check of existing product-approval numbers, and a written line-item price before any work begins, under our no-hassle upfront pricing. Call (888) 836-5914 and we’ll get the number to you in writing.
Serving Gladeview, FL – Our Local Coverage Area
We serve Gladeview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Gladeview
Yes. Because Gladeview is unincorporated Miami-Dade, window and door replacements require a county permit with a product-approval number meeting HVHZ standards. We pull the permit and manage the inspection as part of the job. Call (888) 836-5914 to talk through your project.
Fogging between the panes, water stains on the interior sill, or a frame that no longer sheds water are the three clearest signs a Mr-Glass unit is failing. Any of those means the seal or the drainage has broken down. A free estimate includes a check of each opening so you know exactly what’s failing.
Yes, provided the specific product line carries a current HVHZ approval for your wind zone. The Impact Series and StormGuard lines are built for exactly this. We verify the approval number before ordering so nothing gets flagged at inspection.
Most Gladeview replacements run a few weeks from signed estimate to final inspection, with the permit review through the county portal driving the schedule. Install day itself is usually one to two days depending on window count. Call (888) 836-5914 for a timeline tied to your openings.
Often yes. A cracked lite in an intact impact frame can usually be replaced as a glass unit, which preserves the frame and saves money. If the frame itself is compromised or the old line is discontinued, replacement makes more sense, and we’ll tell you which on the estimate. Call (888) 836-5914 for an exact quote, free.
Service Areas Near Gladeview
We handle Mr-Glass work throughout Gladeview and the surrounding communities, including Hialeah, Miami Springs, and Opa-locka, plus West Little River and Pinewood. Wherever you are in this part of the county, our Gladeview service area coverage reaches you with the same written pricing and permit discipline. For the full picture of our Mr-Glass service, we’re glad to walk you through what we cover.
Book Your Mr-Glass Service in Gladeview Today
Storm-damage repairs and broken glazing move fast on our schedule, and larger replacements get a written estimate first, always. Our crews are background-checked and uniformed, and every visit comes with a photo record of what we found and what we did. Call (888) 836-5914 for your free estimate.
Written by the team at Rowan Construction Group Hialeah.












