







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Brownsville, FL
We provide independent CGI construction and installation service across Brownsville, from impact window retrofits in 1950s concrete-block homes to full replacement of corroded sliding doors. What sets our CGI work apart here is the starting point: many Brownsville properties carry unpermitted legacy additions, so we verify framing, flashing, and code compliance before a single unit goes in. The CGI products we work with are engineered for Miami-Dade’s high-velocity hurricane zone, and the difference between a clean install and a leak is in the details. Call (888) 836-5914 to schedule your free estimate.
Why Brownsville Residents Choose Us for CGI Service

CGI’s impact lines – the Impact Series, the Sentinel Series for windows, the StormGuard Series for sliding glass doors – are built to the same engineering standards whether they go into a new build or an older CBS wall. But the wall is where installs succeed or fail. Older Brownsville homes have block walls with decades of patchwork stucco, and some have openings that were never properly flashed to begin with.
That’s the knowledge our technicians bring, drawing on crews with up to 19 years in the field. We’re an independent CGI service provider, not affiliated with or authorized by the manufacturer, so our approach is straightforward: use genuine CGI OEM parts for glass, locks, and weather seals where warranty and performance require them, and source quality aftermarket hardware where it makes better sense. You get a written flat price before work starts, background-checked and uniformed technicians, and a photo record of the opening conditions and the completed install on every visit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Brownsville
- Failed seals and gaskets on impact windows. Years of intense South Florida UV and salt air break down weather seals, and the water intrusion often doesn’t show up until you see a stain spreading across interior stucco. Brownsville’s heavy summer rain turns a failed seal into a wall-cavity problem fast.
- Corroded aluminum frames and hardware. Salt-laden air eats into finishes, especially on older installs that didn’t use proper coastal-grade coatings. When the frame is compromised, the impact rating is compromised too, and full replacement becomes the honest answer.
- Improper flashing and anchoring on retrofits. The number one reason we see leaks after hurricane season is a window that was anchored into CBS block without flashing detailed correctly. The unit can be fine; the opening isn’t.
- Unpermitted CGI products in converted openings. Carports turned into living space, jalousie windows swapped for impact units without permit or Miami-Dade NOA documentation – we see this constantly in Brownsville and help restore code compliance.
- Jalousie-window openings and non-compliant egress. 1960s openings weren’t sized or framed for modern impact units. We assess the rough opening and structural condition before recommending what product fits.
CGI Service in Brownsville: What Local Conditions Mean for Your Equipment
Brownsville (33142) is one of the few neighborhoods in Miami-Dade’s urban core where contractors routinely pull apart an exterior wall and find an addition that was never permitted. The housing stock – 1940s through 1970s single-story concrete-block and CBS homes, many with wood-frame and jalousie-window additions, flat or low-pitch roofs – has been patched, expanded, and rebuilt after storms for decades. For CGI window and door owners, this means a replacement job can quickly reveal that the original unit sits in an opening that doesn’t meet current Miami-Dade impact or egress code. That’s not a reason to walk away from the project, but it is a reason to plan for permitting and possible framing remediation before the install begins. Tight side setbacks and small infill lots add a practical wrinkle too: staging materials and pulling old units out of a narrow side yard takes planning.
CGI Models & Products We Service in Brownsville
We work across the CGI product lines: the Impact Series (hurricane-rated windows and doors), the Sentinel Series (impact windows), the StormGuard Series (impact sliding glass doors), and the Classic Series (non-impact windows and doors). For each job, our approach on parts is deliberate. Impact glass, locking mechanisms, and weather seals are sourced as genuine CGI OEM parts to preserve warranty coverage and rated performance. Non-structural hardware – handles, hinges, trim pieces – can often use high-quality aftermarket equivalents at a lower cost, provided the part is verified against Miami-Dade NOA compliance. We don’t claim local warehouse stock; parts are ordered per job, and the written quote spells out exactly what’s specified and why.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Brownsville

Here’s what CGI work typically costs in Brownsville, in dollars you can screenshot and compare:
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
What drives cost on a Brownsville job: the number and size of units, whether the existing openings need reframing to meet impact code, the condition of the CBS block and stucco around each opening, and whether permits are required for a previously unpermitted addition. Your free estimate includes a written flat price, a written scope, and a written warranty – and no work proceeds on a change until the change order is signed. Bring us a competitor’s written estimate and we’ll review it line by line at no charge. Call (888) 836-5914 for an exact quote.
Serving Brownsville, FL – Our Local Coverage Area
We serve Brownsville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Brownsville
Yes – window and door replacements for impact-rated units require a permit in Miami-Dade, and a prior unpermitted addition can complicate that. The county may require you to address the non-compliant work as part of the inspection. We assess existing conditions first and tell you what we find in plain terms before any paperwork is filed. Call (888) 836-5914 for a free assessment.
Start with the original installation paperwork – the manufacturer’s warranty attaches to the product, not the installer, and coverage varies by line. Beyond that, the decision comes down to frame condition and glass integrity. If the frame is sound and the glass hasn’t failed, repair is often viable. If corrosion has reached the frame or the impact rating can’t be confirmed, replacement is usually the safer route. Call (888) 836-5914 and we’ll include a warranty and repair-vs-replace assessment in your free estimate.
The Sentinel Series and Impact Series are the right starting point for most Brownsville CBS homes – both carry Miami-Dade impact ratings. The deciding factor isn’t the line; it’s the anchoring and flashing detail specific to the opening. Call (888) 836-5914 and we’ll walk you through which line fits your walls.
Usually yes, but the rough opening has to be assessed first. Jalousie frames in older Brownsville homes are frequently undersized or inset differently than modern impact units, so reframing the opening – not the whole wall – is often the extent of the structural work. Call (888) 836-5914 to schedule a free site assessment.
Install work gets sequenced around afternoon storms – openings can’t stay exposed during a downpour. Expect each opening to be prepped, installed, flashed, and closed the same day it’s opened, so a rainy-week install may stretch over more days than a dry-week one. Call (888) 836-5914 for a scheduling window and a written flat price.
Service Areas Near Brownsville
We work throughout Brownsville (33142) and the surrounding neighborhoods: Hialeah, Miami Springs, Opa-locka, Westview, West Little River, and Gladeview. Our Brownsville service area covers both residential and investor-owned properties. If you’re in Miami proper or just over the county line, our CGI service reaches you too.
Book Your CGI Service in Brownsville Today
Every CGI install in Brownsville gets a written flat price before work starts, a documented photo record when the crew leaves, and the 365-Day Done Right Promise – if it’s not done right, we make it right. Free second opinion on any written estimate you already have. Call (888) 836-5914 to schedule your free estimate.
Written by the team at Rowan Construction Group Hialeah.












