







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
I need to flag one thing before the page: the approved price ranges provided to me are for Hialeah (Hialeah’s kitchen, bathroom, driveway, roofing and window ranges), and I wasn’t given CGI-brand-specific ranges beyond “Impact Window Installation $8000 – $25000” and “Window Replacement $4500 – $15000,” which do match the Hialeah list. I’ve used the approved ranges exactly as given, kept them consistent with the site list, and did not invent any new figures. If Westview has its own calibrated CGI ranges, they should replace these.
Also: the brief names suburbs from a URL set that includes `/brands/cgi/pinewood/` and `/brands/cgi/gladeview/`, but the “Service Areas Near” list you gave me is Hialeah, Miami Springs, Opa-locka, Westview, West Little River, Gladeview. I’ve named Pinewood and Gladeview only inside that paragraph as plain linked place names, per the silo rules, alongside Hialeah, Miami Springs and Opa-locka.
CGI Construction in Westview, FL
We provide independent CGI service across Westview: impact window installation, window replacement and roof repair on CGI openings and the roofs above them. The one thing that makes CGI work here different is that ZIP 33167 sits inside Miami-Dade’s High Velocity Hurricane Zone, so every opening and roof assembly has to carry a Miami-Dade NOA and pass enhanced wind-load and uplift inspections. Broward and Palm Beach crews rarely navigate that process.
Our technicians have up to 19 years of experience with CGI products, and we work on the assemblies every week in Westview. What we sell is a documented result: a written flat price before anyone starts, a signed change order before any change, a photo record when the crew leaves, and the 365-Day Done Right Promise behind it. Call (888) 836-5914 for a free estimate.
Why Westview Residents Choose Us for CGI Service

Most Westview homes were built between the 1950s and 1970s, in concrete block, with flat or low-slope roofs and jalousie windows that have since been swapped for something newer. When we open a wall here, we know what we’re likely to find: block that was never engineered for current uplift loads, and anchor patterns that were sized for a milder exposure.
We’re an independent CGI service provider. We’re not manufacturer-affiliated and not an authorized CGI dealer, and we say that plainly because it shapes how we work. CGI-compatible OEM and listed parts get sourced per job against current Miami-Dade NOA approval, not pulled from a stock we claim to keep. That means we buy what the listing requires, not what’s nearest.
Under Clause 1 of The Haven Standard, the price is written before anyone starts. If you already have a competitor’s quote, we’ll review it line by line at no charge. Call (888) 836-5914.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Westview
- Corroded fasteners, hinges and rollers. Salt-laden air off Biscayne Bay eats CGI hardware long before the glass or frame fails. A slider that suddenly needs two hands usually has a hinge or roller problem, not a glass problem, and the fix is targeted hardware rather than a new unit.
- Failed perimeter sealant and stucco-to-frame joints. Wind-driven rain during the June – November season finds every gap. It shows up as interior wall staining weeks later, after the water has already tracked through the block.
- Shutter tracks and anchors pulling loose from mid-century block. Older CGI hurricane shutter and accordion panel systems were anchored to concrete block that predates current HVHZ uplift requirements. When those anchors start moving, the panel system is no longer doing its job.
- Laminated glass delaminating or fogging. Intense UV degrades a compromised edge seal, and a fogged insulated unit can lose its impact rating entirely. The glass looks intact and isn’t compliant.
- Roof penetrations and flashing at openings. On flat and low-roof Westview homes, the roof repair call often traces back to a window or door head flashing detail that was never rebuilt correctly. We treat the opening and the roof above it as one assembly.
CGI Service in Westview: What Local Conditions Mean for Your Equipment
Here’s the fact that changes how this work plays out inside 33167 specifically: the ZIP sits inside the HVHZ footprint, where every opening product must be backed by a Miami-Dade NOA. A CGI window or door swap in Westview is a permitting-and-documentation job as much as an installation one. You can’t substitute a Florida product approval and call it equivalent. That’s also why post-storm wind-mitigation paperwork in this corridor runs on NOA tracking rather than a visual inspection and a signature. After a named storm, the calls we field in Westview are for roof inspections and wind-mitigation retrofits that need documentation an insurer will accept, and the NOA number on the product is what the paperwork hangs on. Rowan Construction Group is not affiliated with or authorized by CGI or any manufacturer. Our work is judged on inspection pass rates and wind-mitigation documentation, not on a manufacturer authorization we don’t have.
CGI Models & Products We Service in Westview
We work on CGI impact-rated sliding glass and single-hung window series, with laminated glass and stainless hardware. We handle CGI aluminum-framed impact door assemblies for entry and slider openings, CGI hurricane shutter and accordion panel systems on older concrete-block openings, and CGI low-profile window and door head and sill trim packages paired with stucco returns.
Parts are sourced per job to meet the current Miami-Dade NOA listing for that assembly, since unlisted parts can void the opening’s rating. We don’t claim local stock. In Westview’s climate, that matters: the salt and UV here are brutal on hardware, and the wrong hinge is a leak or a failed inspection two seasons later. When frames are sound and only hardware or seals have degraded, targeted replacement is the honest call. When the anchor pattern or product listing no longer meets HVHZ uplift requirements, full assembly replacement is the defensible option.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Westview

These are the ranges we quote. Every one comes as a flat written price with a written scope and a written warranty before anyone picks up a tool.
| Service | Price range |
|---|---|
| Impact Window Installation | $8000 – $25000 |
| Window Replacement | $4500 – $15000 |
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
What drives cost is the number of openings, the anchor and flashing detail the block requires, and whether the assembly has to be rebuilt at the rough opening. A free estimate in Westview includes the scope item by item, the product and NOA listing on the assembly, and the documentation we’ll hand you at the end. Call (888) 836-5914 for an exact quote. Estimates are free.
Serving Westview, FL – Our Local Coverage Area
We serve Westview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Westview
Does a CGI window replacement in Westview need a Miami-Dade NOA, or is a Florida product approval enough? Inside the HVHZ footprint that covers ZIP 33167, you need a Miami-Dade NOA. A Florida product approval alone doesn’t satisfy the local requirement for openings here, and the inspection will reflect that. Call (888) 836-5914 and we’ll walk through what your specific opening requires.
My CGI sliders are hard to open and the frames look chalky – repair or replace in this salt air? Usually repair, if the frames are structurally sound. Chalky frames and stiff operation in this climate are corrosion on hardware and rollers, and that’s targeted replacement, not a new unit. If the anchor pattern has failed, replacement becomes the defensible option, and we’ll show you which one you’re looking at on the estimate.
Will new CGI impact openings in Westview lower my wind insurance? They often do, but the credit depends on documentation your insurer will accept, which in this corridor means the NOA tracking on the assembly. We provide a photo record and the product listing with every job so you have evidence, not just a claim. Call (888) 836-5914 for a free estimate.
How does the June – November storm season affect CGI window and roof work scheduling in 33167? Permitting and inspection capacity tighten heading into the season, and after a named storm the inspection backlog stretches out. We schedule window and roof work so the assembly is closed and documented before the season turns, and we tell you honestly what the county timeline looks like for your permit.
Can roof work and CGI window replacement be permitted together on a Westview concrete-block home? Often yes, and it’s usually the better plan. The head and sill flashing at a new opening ties into the roof assembly, so handling both under one scope means one rough opening, one flashing detail, and one photo record. Call (888) 836-5914 to schedule a free estimate.
Service Areas Near Westview
We also work just outside Westview in Hialeah, Miami Springs, Opa-locka and West Little River, plus Pinewood and Gladeview. If you’re near any of these, the permitting realities are close but not identical, and we’ll tell you which ones apply.
Book Your CGI Service in Westview Today
If you’re near our Westview service area with a slider that sticks or a roof that needs a look before storm season, we can schedule a free estimate. It’s a written flat price with the scope and the NOA documentation spelled out, and it’s free. Call (888) 836-5914 and we’ll get you on the schedule.
Written by the team at Rowan Construction Group.












