







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Hialeah Homeowners Choose Dvele Construction
Rowan Construction Group Hialeah provides independent Dvele construction and remodeling service in Hialeah, FL, for owners of Dvele prefabricated and modular homes. What sets our Dvele work apart is where we start: the shell. We plan kitchen, bath, and roof scope around how your specific home was factory-assembled and set on its foundation, not around a stock remodel checklist. We are an independent contractor and are not affiliated with, authorized by, or endorsed by Dvele. Call (888) 836-5914 for a free estimate.
Dvele builds homes as prefabricated modules, engineered and assembled off-site, then set and finished on site. That means working on one asks a contractor to understand two things a standard remodeler may not: the interface details of the factory shell (panel joints, weather-sealed module seams, pre-built service chases) and the site-applied finishes (kitchen, bath, roof) that behave differently on a modular home than on stick-built housing. Our technicians have up to 19 years of experience, and every Hialeah job is quoted with a flat written price before anyone picks up a tool.
Key Takeaways
- Dvele homes are engineered systems. Seam behavior, panel boundaries, and service chases shape every remodel decision.
- We are independent. No factory authorization is implied or claimed.
- Every project begins with a written flat price and written scope. No work starts without them.
- Our focus here is kitchen remodeling, bathroom remodeling, and roof replacement and installation.
Why Trust Rowan Construction Group Hialeah for Your Dvele Construction?

Dvele‘s modular construction means the joints matter more than the walls. Our technicians work from that understanding every time they open a Dvele home. We map panel boundaries and factory service chases before we cut, inspect the envelope and roof-to-wall flashing before we finish an interior, and use compatible, code-accepted panel, seal, and flashing components where a repair touches the shell rather than generic substitutes.
Warranty-safe practice sits at the front of the plan. Where your Dvele home still carries a manufacturer warranty, we scope work so it doesn’t unnecessarily breach sealed elements, and we document what we found and what we did with a photo record on every visit. That record is proof you can hand to your manufacturer, your insurer, or a future buyer. It comes standard, not as an upgrade.
Inside the home, we’re brand-agnostic and quality-driven: established names like Kohler, Cambria, Silestone, and KraftMaid where they suit the spec. On the envelope, honest repair-versus-replace judgment matters most. We’ll re-seal a failing seam before we’ll sell a premature roof. Every Hialeah project starts with a written flat price and scope before work begins, and no change proceeds on a Hialeah job without a signed change order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Fix in Hialeah
Dvele’s prefabricated shell is well-built, but it behaves in ways stick-built homes don’t. Here are the issues we see most often in Hialeah, and why they happen.
- Module seam and panel-joint moisture intrusion in the Single-Level Modular Series and Two-Story / Multi-Module Series. South Florida’s wind-driven summer thunderstorms push rain against factory seams in ways the factory sealing wasn’t necessarily tested for on a Hialeah street. When a roof or exterior job exposes a seam, it needs re-flashing and re-sealing with components that match the shell.
- Interior finish cracking and movement at module-to-module drywall joints. On Dvele homes, cracks, nail pops, and tape-joint failures show up in a straight line at the seam, not scattered mid-wall. That’s the shell moving. The fix is envelope-first, then drywall and paint at the joint.
- Factory service chases and chase-wall access that must be opened and re-sealed carefully. Plumbing and electrical work in a Dvele kitchen or bath hits pre-engineered chases. Cut blindly and you can breach the shell’s weather sealing. Careful work means mapping them first, re-sealing on close.
- Roof-to-wall and parapet tie-in details on prefabricated shells. A roof repair or replacement on a Dvele home in Hialeah’s high-wind zone needs compatible flashing and membrane detailing. Standard details from a stick-built spec sheet don’t always translate to a modular roof line.
- Tile and cabinet joints that move with the shell after an exterior breach. When rain works at an exterior panel joint, interior finishes at the adjacent seam begin to shift. Ignoring the envelope and patching the tile is a temporary fix at best.
Hialeah’s climate makes every one of these worse. Intense sun, heavy storms, and hurricane-season wind-load and impact requirements mean Miami-Dade product-approval (NOA) compliance is a constant concern, especially on prefabricated shells where flashing and sealant compatibility matter. We check it before we specify.
Dvele Parts & Our Repair-vs-Replace Approach

Dvele homes are engineered systems, so shell-linked parts aren’t generic. On panel, seal, and flashing components, we source OEM-spec or tested-equivalent parts that match the shell’s published details and the Miami-Dade approval list. We don’t stock Dvele parts locally. Each job is sourced to the specific model and assembly.
Inside the home, the constraints are looser. Kitchen and bath fixtures, tile, and countertops from established names such as Kohler, Cambria, or Silestone are appropriate and code-accepted. Where the envelope is concerned, the honest rule is: a targeted re-seal on a failing seam costs far less than a premature roof. But if panel or flashing damage is structural, patching over it buys you a season and bills you twice.
That judgment is exactly what we put in writing before work begins, and the reason no Hialeah Dvele project moves forward without a signed change order. Call (888) 836-5914 for an exact quote on your repair or remodel – estimates are free.
Our Dvele Service Process – Step by Step
- 1
Diagnosis. We inspect the envelope and the roof-to-wall flashing first, then map the panel boundaries and factory service chases, so we know exactly where the shell is before we plan any interior work. Findings go into a written scope with photos.
- 2
Repair and install. Where a repair touches the shell, we restore weather sealing with compatible panel, seal, and flashing components. Interior kitchen and bath work is laid out to stay off the joints and honor the chases.
- 3
Test. Exterior joints and roof details are water-tested where possible. Water lines, drains, and electrical are checked at correct loads. The interior finish is inspected for movement at the seam after a rain event where the schedule allows.
- 4
Warranty. You receive a written warranty and your documented photo record on close. Every Dvele project is backed by our 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Hialeah

We work on all four Dvele home families: the Single-Level Modular Series, the Two-Story / Multi-Module Series, the Net-Zero-Ready Design Series (solar- and battery-ready), and the Custom / Semi-Custom Prefabricated Home Program. The sub-services we handle most often on Dvele homes in Hialeah are kitchen remodeling, bathroom remodeling, and roof replacement and installation, plus targeted envelope and seam repair.
The typical pattern on a Dvele home goes like this. An interior finish opens along a module seam, usually a drywall crack, a nail pop, or a tile joint that moves with the shell, after wind-driven rain has begun to work at an exterior panel joint. A qualified local contractor inspects the envelope and roof-to-wall flashing first, corrects the source, then repairs the interior affected by the movement.
When the project is a Dvele kitchen or bath remodel, the careful approach is to map the factory service chases and panel boundaries before cutting, so the new layout stays off the joints and the shell’s weather sealing is restored and not breached.
We Also Service These Brands
Rowan Construction Group Hialeah isn’t a single-brand shop. Alongside Dvele, we service and install KraftMaid cabinets, Cambria and Silestone countertops, and Kohler fixtures, and our seven-trade operation spans kitchen, bath, roofing, windows and doors, fencing, driveways and pavers, and home additions including ADUs. That range means your Dvele project can be scoped across the whole build rather than handed off. Fifty-plus vetted material brands feed the written quote, so the number stays honest.
FAQs – Dvele Construction Service in Hialeah
No. We are an independent contractor and are not affiliated with, authorized by, or endorsed by Dvele. We work on Dvele homes as a qualified independent service provider and scope every job as independent construction contracting. Call (888) 836-5914 with any questions about your project.
On the shell, yes – we source OEM-spec or tested-equivalent panel, seal, and flashing components that match the published assembly details. We don’t stock Dvele parts locally, so each job is sourced to the specific model. Interior fixtures and countertops come from established brands such as Kohler, Cambria, or Silestone where appropriate.
It depends on the scope. A seam re-seal and interior patch can run one to three days; a roof repair runs one to three; a kitchen or bath remodel runs three to eight weeks depending on finish selections and permit timing. You get a written schedule with your written price before work starts. Call (888) 836-5914 for a tailored timeline.
All four: the Single-Level Modular Series, the Two-Story / Multi-Module Series, the Net-Zero-Ready Design Series, and the Custom / Semi-Custom Prefabricated Home Program. Our technicians have up to 19 years of experience working on modular shells and their site-applied finishes.
Not if the work is done carefully. We scope repairs and remodels to avoid unnecessarily breaching sealed shell elements, and we document every visit with a photo record you can hand to your manufacturer. Where a manufacturer warranty still applies, that record is your evidence. We’re happy to review the terms with you before work begins.
Here are the ranges we quote for the work we do most often on Dvele homes in Hialeah:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Tile Roof Repair | $600 – $2,500 |
These are ranges, not quotes. Your exact number depends on your Dvele model, the condition of the envelope, and finish selections. Call (888) 836-5914 for an exact quote – estimates are free.
Book Your Dvele Service in Hialeah, FL
If you own a Dvele home in Hialeah, the first step is a written scope and a flat price you can screenshot and compare. Call (888) 836-5914 to schedule your free estimate. We’ll inspect the shell and the interior, tell you exactly what we found, and put the number in writing before any work starts.
Written by the team at Rowan Construction Group.












