







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Hialeah Homeowners Choose Jerith Construction
We’re an independent Jerith service provider working across Hialeah, and we handle Jerith aluminum fence and railing repair and installation with the parts and anchoring these systems actually need in South Florida. We are not a manufacturer-authorized dealer and we’re not affiliated with Jerith, so our loyalty sits with the property, not a sales program. What makes our Jerith work different is specificity: the right series for your lot, OEM-compatible hardware, and footings sized for Hialeah soil and wind. Call (888) 836-5914 for a free estimate.
Why Trust Rowan Construction Group Hialeah for Your Jerith Construction?

Our technicians have up to 19 years of experience, and that time shows up in the details Jerith owners care about: which hinge bushings wear first, how a GateWorks-style post cap sits after a few summers of UV, and why a fence that looked plumb at install can rack after a wet season. Jerith builds several distinct aluminum series, and each one has quirks. The Industrial series, with its heavier pickets, tolerates more wind load but puts stress on post anchors; the Grandview and Lexington lines carry ornamental detail where finish failure shows up first on south- and west-facing panels; the Portofino series reads more decorative, which means more joints and brackets to keep tight.
We source OEM-compatible parts, hinges, brackets, caps, and replacement panels, so fit and finish hold up, and we recommend service steps that stay warranty-safe. That means we don’t drill, cut, or coat a Jerith section in ways that could void coverage, and we document what we found with a photo record you keep. Every job gets a flat written price before anyone touches a post, and no change proceeds without a signed change order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Fix in Hialeah
Jerith aluminum fences are built to last, but Hialeah’s heat, salt air, and storm seasons stress them in specific ways. Here’s what we see most.
- Powder-coat chalking and fading on sun-facing panels. After several years of Miami-Dade UV, the finish on south- and west-facing pickets can chalk, fade, or peel. The cause is cumulative UV exposure breaking down the clear coat, not a defect. We assess whether a section can be cleaned and re-coated or needs panel replacement.
- Gates sagging and dragging. A Jerith gate that scrapes the ground usually has worn hinge bushings or loosened post anchors. On Grandview and Lexington gates, the hardware takes more leverage stress than the panels, so bushings wear first. We replace hinges and re-set anchors to restore swing.
- Loose or corroding post-to-panel brackets. Salt air accelerates corrosion at fasteners and brackets. When connections loosen, panels rack and the fence loses rigidity. We torque and replace hardware with compatible parts.
- Sections leaning or racking after storms or soil settlement. This is common in Hialeah’s sandy, shifting soil, especially when posts were set in shallow footings. We check embedment, add or re-set concrete footings, and re-level the run.
- Bent pickets and loose top rails after wind events. Hurricane-season gusts bend individual pickets and pop top rails. If damage is isolated, we repair that section; widespread damage gets an honest replacement recommendation.
Jerith Parts & Our Repair-vs-Replace Approach

We use Jerith OEM replacement components, hinges, brackets, caps, and panels, whenever they’re available, because OEM parts preserve fit and finish. When OEM is unnecessary or backordered, we source quality aftermarket hardware for hidden fasteners and anchors that meet the same load requirements. We don’t claim to stock Jerith parts locally; we source them per job so you get the right component, not whatever’s on hand.
The repair-or-replace call is honest. If a Jerith fence has isolated damage, one bent section or a single sagging gate, we repair that section. If corrosion or finish failure runs across multiple panels, patching becomes a losing game and we’ll say so, with photos and a written recommendation. Either way you get a flat written price before work starts. Call (888) 836-5914 to schedule your free estimate.
Our Jerith Service Process – Step by Step
A typical Jerith job follows four steps, and you know what to expect at each one.
- 1
Diagnosis. We inspect post embedment, hinge condition, bracket tightness, and finish across the run. We photograph what we find, including the footing depth and any racking, so you can see the condition in plain terms.
- 2
Repair or install. We replace failed hardware with Jerith-compatible parts, re-set footings, re-level panels, or install a new Jerith series sized for your property. Every step stays within warranty-safe practice.
- 3
Test. We swing every gate, check alignment and latching, and confirm panels are plumb and tight before we call it done.
- 4
Warranty and record. You get a written warranty and the documented photo record showing what we found and what we did. Under our 365-Day Done Right Promise, if it’s not right, we make it right.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in Hialeah
We work across the Jerith aluminum fence and railing families commonly found in Hialeah: the Industrial series, the Grandview series, the Lexington series, and the Portofino series, along with associated gates, posts, caps, and hardware. Series selection depends on your lot: wind exposure, the ornamental look you want, and how the fence meets your house and driveway. We specify the series and anchoring for each property rather than defaulting to one style. We service existing Jerith installations and install new ones. We don’t claim to stock any of these lines locally.
We Also Service These Brands
We’re a multi-brand construction and remodeling company, not a single-brand shop. Alongside Jerith work, we handle KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, with written pricing and the same documentation on every trade. You get one accountable contractor across the scope.
FAQs – Jerith Construction Service in Hialeah

Is Rowan Construction Group Hialeah authorized by Jerith?
No. We’re an independent Jerith service provider, not a manufacturer-authorized dealer and not affiliated with Jerith. We service and install Jerith products using OEM-compatible parts and warranty-safe practices. Call (888) 836-5914 for a free estimate.
Do you use genuine Jerith/OEM parts?
Yes, we use Jerith OEM replacement components, hinges, brackets, caps, and panels, whenever available. When OEM is unnecessary or backordered, we source quality aftermarket hardware that meets the load requirements. Call (888) 836-5914 to talk through your job.
How long does Jerith service take?
Most Jerith repairs, hinge and bracket replacement, or re-leveling a section, are completed in a day once parts are on hand. New installs and multi-panel jobs depend on series and length. We’ll give you a written timeline with your flat price. Call (888) 836-5914 for a free estimate.
What Jerith models/series do you cover?
We cover the Industrial, Grandview, Lexington, and Portofino aluminum fence and railing series, along with gates and hardware. If you’re unsure which series you have, we’ll identify it during the estimate. Call (888) 836-5914.
Will service void my Jerith warranty?
Not when service stays within warranty-safe practice. We avoid cutting, drilling, or coating in ways that could void coverage and use compatible parts. We’ll review your warranty terms before work starts. Call (888) 836-5914.
How much does Jerith construction cost in Hialeah?
Aluminum fence installation in Hialeah typically runs $4,000 – $10,000, and repairs cost less depending on scope. Here’s what drives the number:
| Service | Typical Range in Hialeah |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
Call (888) 836-5914 for an exact quote. Estimates are free.
Book Your Jerith Service in Hialeah, FL
Whether you need a sagging gate fixed or a new Jerith aluminum fence installed, you get a flat written price, a photo record, and a written warranty before we start. Call (888) 836-5914 to schedule your free estimate in Hialeah. Free second opinion on any written estimate too.
Written by the team at Rowan Construction Group Hialeah.












