







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Hialeah Homeowners Choose PGT Construction
We’re an independent PGT service provider serving Hialeah, and we repair and install PGT impact windows and sliding glass doors – WinGuard aluminum and vinyl, PremierVue and Estate sliders, aluminum single-hung and roller windows – as part of our seven residential trades. What sets our PGT work apart is diagnostics before sales: we find out whether the rollers, track, weatherstrip or glazing gasket has actually failed on your opening, then tell you plainly if a repair ends it or if the unit needs replacing. We’re not affiliated with or authorized by PGT, and we don’t pretend to be. Call (888) 836-5914 to schedule a free estimate on your Hialeah PGT opening.
Why Trust Rowan Construction Group Hialeah for Your PGT Construction?
Our technicians have up to 19 years of experience, and PGT assemblies come across their benches constantly because PGT is a Florida-born manufacturer whose products sit on thousands of South Florida homes. That repetition matters. A technician who has pulled a hundred WinGuard sliders knows the difference between a roller that’s flattened and a track that’s packed with grit, and knows the difference in labor. We order OEM PGT rollers, weatherstrip, pile fin, glazing gaskets and hardware whenever those parts are still available, so fit and impact rating stay intact. When an OEM part is discontinued, we match a quality aftermarket equivalent on dimension and material rather than forcing a generic part into a precision opening. Every project gets a flat written price and a written scope before work begins, under Clause 1 of the Haven Standard. No change proceeds without a signed change order – the discipline behind 4,000-plus projects finishing within a few percent of the agreed cost. Every visit includes a documented photo record and a written warranty. Free second opinion on any written estimate: bring a competitor’s quote and we’ll review it line by line at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Hialeah
These are the failure modes we see on PGT units around Hialeah, and the reasons behind them:
- Sliding glass door roller and track wear. Hardened debris in the bottom track of a PGT PremierVue or Estate slider causes the panel to drag, jump or come off its rollers entirely. The rollers themselves flatten over years of carrying a heavy impact panel. Grit gets in from the street, salt air and the yard, and the bottom track is where all of it lands.
- Failed or gasket-compromised impact glazing. On older WinGuard units, seal or interlayer breakdown around the glass edge shows up as haze, delamination or moisture between lites. This is edge-seal failure, not surface dirt, and it changes the repair conversation.
- Weatherstrip and pile-fin deterioration. PGT aluminum sliders and single-hungs lose their pile fin and weatherstrip with sun exposure, letting wind-driven rain and air past the sash in hurricane season. A door that whistles or weeps is usually this, not a frame problem.
- Corrosion and screw/strike misalignment on aluminum frames. In Hialeah’s coastal air, aluminum frames pit at the sill and at hinge and strike points. Latches get hard to engage, and that misalignment hurts both water performance and impact performance.
- Panel and sash misalignment after storm or settling. A CBS block house on a small lot moves with the ground and takes wind-load pressure at the openings. A panel that used to glide can start binding at the head, and the fix is adjustment and hardware before it’s a replacement.
PGT Parts & Our Repair-vs-Replace Approach

We use PGT OEM rollers, weatherstrip, pile fin, glazing gaskets and hardware whenever they’re still available, because OEM parts preserve fit and keep the impact rating intact. Where an OEM part is discontinued, we match a quality aftermarket equivalent on dimensions and material rather than forcing a generic part into a precision opening.
We don’t stock parts locally – each job is quoted with the parts it needs, and the price is written before anyone picks up a tool. The repair-vs-replace call is honest: a reseal, a hardware change or a roller swap usually fixes a dragging panel. But a delaminated impact lite on a WinGuard window usually means the whole sash or door panel, not a band-aid – the glass is the rated assembly. We tell you which one you’re looking at, in plain terms, and show the photo record so you can see the condition yourself.
If you have a PGT opening that’s dragging, leaking or hazing, call (888) 836-5914 and we’ll come measure it and put a number in writing.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We pull the panel or operate the sash, inspect the bottom track for grit and corrosion, check the rollers, pile fin, weatherstrip and glazing gasket, and photograph what we find. You get a written description of the condition, not a feeling about it.
- 2
Written scope and price. Before any work starts, you receive a flat written price and a written scope naming the parts and labor. Under Clause 1 of the Haven Standard, the price is written first.
- 3
Repair or install. OEM or correctly matched parts go in; if the whole unit is being replaced, the opening is measured and the new PGT unit is ordered to match the layout, then set and sealed to spec. No change proceeds without a signed change order.
- 4
Test under load. The panel is operated through its full travel, the latch and strike are checked, and the opening is water-tested at the sill and gasket line before we call it done.
- 5
Documentation and warranty. You get the photo record of what was found and what was done, plus the written warranty. The 365-Day Done Right Promise backs it: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Hialeah
We service and install PGT WinGuard Aluminum impact windows, PGT WinGuard Vinyl impact windows, PGT PremierVue and Estate sliding glass doors, and PGT aluminum single-hung and horizontal roller windows. That covers the impact assemblies most Hialeah homes carry, plus the non-impact aluminum units common on older CBS block houses. When a kitchen or bathroom remodel changes an opening, we measure the new layout and order the PGT unit to fit rather than reusing the old one blind. Impact window installation and window replacement are both quoted with a flat written price and a written scope, and every job leaves a documented photo record.
We Also Service These Brands
PGT is one line in a broader bench. Rowan Construction Group Hialeah also works with KraftMaid cabinets, Cambria and Silestone countertops and Kohler fixtures across our seven trades, so a kitchen or bathroom project that involves both windows and cabinetry doesn’t need two contractors and two schedules. One written price, one scope, one photo record.
FAQs – PGT Construction Service in Hialeah

Yes, in most cases a dragging or stuck WinGuard slider is repaired, not replaced. The usual cause is grit and salt-laden debris packed into the bottom track plus original rollers that have flattened, so we pull the panel, clean and inspect the track for corrosion, replace the rollers and pile fin with OEM or correctly matched parts, then adjust the strike and latch and check the glazing gasket. Call (888) 836-5914 for an exact quote – estimates are free.
Haze around the edges of an impact window is edge-seal or interlayer breakdown, not surface dirt, and whether it’s covered depends on the unit’s age and the manufacturer’s warranty terms. We inspect it and tell you plainly what we’re seeing before you file anything. If the glazing itself is delaminated, a reseal won’t fix it – that lite needs replacing as a whole sash or door panel. Call (888) 836-5914 and we’ll document the condition on a free estimate visit.
Yes. When a kitchen or bath remodel changes an opening, we measure the new layout and order the PGT unit to match it rather than reusing the old window or door blind. A typical kitchen project runs $14,000 – $45,000 depending on cabinetry, countertops and whether an opening is resized; impact window work is quoted separately so you can see both line items in writing. Call (888) 836-5914 for a free estimate with a flat written price.
Coastal salt air plus Hialeah’s heavy summer rain drives pitting at the sill and at hinge and strike points on aluminum frames, and it makes latches hard to engage. It’s a maintenance reality of the climate, not a defect. We inspect the sill, clean the track and service the hardware before anyone talks replacement. Call (888) 836-5914 – a service visit and written quote cost you nothing.
No. Rowan Construction Group Hialeah is an independent PGT service provider and is not affiliated with or authorized by the manufacturer. We work on PGT products every week and use OEM parts when available, but any work we do is under our own written scope and warranty, not the factory’s.
Sample ranges below, all quoted as a flat written price before work starts:
| Service | Typical range in Hialeah |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
Your exact number depends on how many openings, the series, and whether the frame or glazing is being replaced or repaired. Call (888) 836-5914 for an exact quote – estimates are free.
Book Your PGT Service in Hialeah, FL
Bring us a dragging slider, a hazy impact lite or a set of openings you want replaced as part of a kitchen or bath project. You’ll get a measured visit, a diagnostic photo record, and a flat written price before anyone picks up a tool. Call (888) 836-5914 to schedule your free estimate.
Written by the team at Rowan Construction Group Hialeah.












