







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Hialeah, FL
Vanities, tile and fixtures are the three surfaces a bathroom is judged by: the cabinet and counter you touch every morning, the floor and shower walls you stand on, and the faucet, toilet and trim you operate a dozen times a day. Replacing any one of them is a finish-level job; replacing all three at once is a sequenced one, and the order matters more than the materials. Rowan Construction Group Hialeah handles the full scope under our Bathroom Remodeling work, with a flat written price before anyone starts and a photo record of what was found behind the old tile. Call (888) 836-5914 for a free estimate.
Hialeah bathrooms built between the 1960s and 1990s share a few traits we see constantly: 4-inch square wall tile set in a thick mud bed, cast iron tubs on a mortar base, and single-basin vanities at 30 inches where a standard 33-inch cabinet now sits. That mud bed is the reason a tile swap here is rarely just a tile swap. The old bed has to come out to get a flat plane for a modern waterproofing membrane, and that’s a demolition step most one-day quotes leave out. We put it in the written scope so the number you agree to is the number you pay.
What this sub-service covers
- Vanities: cabinet replacement or refacing, countertop fabrication in quartz or granite, sink and faucet installation, and the plumbing rough-in adjustment that comes with moving a drain or supply line.
- Tile: floor tile, shower walls and pans, tub surrounds, backsplashes, and the waterproofing membrane underneath all of it.
- Fixtures: faucets, shower valves and trim, toilets, tub fillers, towel bars, mirrors and lighting.
We source through vetted brands rather than a single house line, which keeps the written quote honest instead of padded. Vanities come from KraftMaid and Wellborn. Counters come from Cambria and Caesarstone. Faucets and shower trim come from Moen and Delta, and toilets from American Standard and Toto. When a customer wants a specific finish, we price that finish rather than steering them toward whatever is sitting in a warehouse.

Key Takeaways
- Vanity, tile and fixture work in Hialeah typically runs $3,200 to $14,500 depending on square footage, tile type and whether the shower pan is rebuilt.
- The most common hidden cost in Hialeah is the old mud-bed wall tile, which has to be demolished before a modern membrane can go down.
- Every job gets a flat written price, a signed change order for any scope change, and a documented photo record on every visit.
- Our technicians have up to 19 years of experience, and a live person answers calls 24/7.
When You Need Vanities, Tile & Fixtures
Some of these are cosmetic. Some are water damage waiting to happen. The difference is usually visible in about ten minutes of inspection.
- Cracked or loose wall tile around the shower. In Hialeah’s older housing stock, tile that pops off the wall is usually telling you the substrate behind it has been wet for a while. Grout lines that stay dark after cleaning point the same direction.
- A vanity cabinet swollen at the base. Particleboard cabinet boxes absorb moisture from floor mopping and slow leaks under the sink. Once the box swells, it doesn’t come back. Refacing won’t fix a soft floor panel.
- A dripping or stiff shower valve. A Moen or Delta valve that won’t turn smoothly, or drips after you shut it off, is a cartridge problem. Replacing the cartridge is cheap; replacing the tile you had to open to reach it is not. We plan the access before we cut.
- A toilet that rocks or runs. A rocking toilet has a failed wax ring, and water is reaching the subfloor every flush. A running American Standard fill valve can waste hundreds of gallons a month. Both are fixable in the same visit as other fixture work.
- A dated vanity height or layout. If your vanity sits at 30 inches and you’re taller than about 5’6″, a 33-inch or 36-inch cabinet with a deeper counter is the single biggest comfort upgrade in the room.
- Water staining on the ceiling below. A shower pan that leaks to the floor below is a rebuild, not a repair. We stop, document it with photos, and put the fix in a signed change order before we touch anything else.

Our Vanities, Tile & Fixtures Process
Sequence is most of the work on a bathroom finish job. Get it wrong and you’re pulling a new vanity to reach a rough-in, or setting tile over a floor that hasn’t been flattened. Here’s the order we follow:
- Walkthrough and written scope. We photograph the existing bathroom, check the substrate where we can reach it, and write a flat price with a written scope and written warranty. Under Clause 1 of The Haven Standard, the price is written before anyone picks up a tool. No exceptions.
- Demolition and condition report. Old tile, vanity and fixtures come out. We document what’s behind them: the condition of the backer board, any rot at the subfloor, the rough-in locations. If a repair wasn’t in the original scope, it goes into a change order you sign before we proceed.
- Rough-in and substrate prep. Plumbing moves for the new vanity, valve replacement, and electrical for any new lighting or heated mirror. Then we flatten the floor and install the waterproofing membrane in the wet areas.
- Tile and vanity installation. Floor tile first, then walls, then the cabinet and countertop so nothing gets chipped by a ladder or a grout float. Fixtures go in last, after tile is sealed.
- Final walkthrough and photo record. We test every fixture, show you the shutoffs, and hand off the photo record from every visit plus the written warranty. The 365-Day Done Right Promise backs the work: if something isn’t right, we make it right.
One safety note we hold to on every job: shower valve replacement and any work at the main shutoff are plumbing tasks we hand to trained technicians, not something we’d walk a homeowner through. A valve that’s cross-threaded or a shutoff that fails under pressure can flood a Hialeah condo unit into the one below it. We also flag any gas or electrical work in the same room and handle it with the right trade.
Vanities, Tile & Fixtures Pricing in Hialeah
Vanities, tile and fixture work in Hialeah typically costs between $3,200 for a straightforward vanity swap with a small tile repair and $14,500 for a full bathroom finish rebuild with a new shower pan and floor. Most of the jobs we quote land between $6,000 and $10,800. Here’s the breakdown so you can compare line items rather than whole numbers:
| Line item | Typical range | What drives it |
|---|---|---|
| Vanity cabinet (36 to 60 inches) | $650 – $2,400 | KraftMaid and Wellborn lines; plywood vs. particleboard box; drawer hardware |
| Quartz or granite countertop | $550 – $1,600 | Cambria and Caesarstone slabs; undermount cutout; edge profile |
| Vanity sink and faucet | $300 – $750 | Moen or Delta single-hole vs. widespread; vessel vs. undermount |
| Floor tile installed | $12 – $28 per sq ft | Porcelain vs. natural stone; pattern; floor flattening needed |
| Shower wall tile installed | $18 – $38 per sq ft | Tile size; mud-bed demolition; membrane system |
| Shower pan rebuild | $2,200 – $4,800 | Pre-slope, membrane, tile, drain replacement |
| Shower valve and trim | $450 – $1,100 | Moen or Delta pressure-balance vs. thermostatic; access through tile |
| Toilet replacement | $350 – $800 | American Standard or Toto model; flange repair; wax ring and supply line |
| Membrane and waterproofing | $400 – $1,200 | Square footage of wet area; liquid vs. sheet membrane |
Three things move the number most in Hialeah specifically. The first is mud-bed demolition: wall tile set in a thick mortar bed over metal lath, common in homes built before the mid-1980s, is heavier and slower to remove than tile on cement board, and it usually needs new backer board behind it. The second is subfloor condition. Bathrooms in older Hialeah neighborhoods, particularly around Palm Avenue and the areas near Hialeah Park, often have subfloor plywood that’s been wet more than once. We price a repair allowance rather than guessing. The third is layout: moving a drain to shift a vanity over a few feet is a different job from swapping a cabinet in the same spot.
Every quote is a flat written price with a written scope, and any change is documented in a signed change order before the work continues. If you already have a competitor’s estimate, we’ll review it line by line at no charge under our Free Second Opinion offer. Call (888) 836-5914 and we’ll get you a written number for your bathroom.
FAQs – Vanities, Tile & Fixtures
How much does a vanity and tile replacement cost in Hialeah?
A vanity replacement with a new quartz counter and a small floor tile repair in Hialeah typically runs $2,400 to $5,800. A full bathroom tile job with a shower pan rebuild runs $6,000 to $14,500. The spread is mostly substrate condition and whether the shower pan needs to come out. Call (888) 836-5914 for an exact quote, and the estimate is free.
Can you replace a shower valve without re-tiling the whole shower?
Often yes. A Moen or Delta valve can frequently be serviced through the existing trim plate opening if the rough-in is compatible, which keeps the tile intact. If the new valve body is a different size or the existing tile is already compromised, we’ll tell you that up front and price the tile repair in the written scope rather than discovering it mid-job. Call (888) 836-5914 and we’ll look at what you have.
How long does a vanity, tile and fixture job take in Hialeah?
A vanity swap with fixtures takes one to two days. A floor tile job runs three to five days including cure time. A full bathroom finish rebuild with a shower pan runs seven to twelve working days. Hialeah humidity is a factor on thinset and grout cure times, so we don’t rush the schedule on the front end and pay for it later.
Do I need a permit for bathroom tile and fixture work in Hialeah?
Cosmetic tile and fixture replacement generally doesn’t need a permit. Moving plumbing supply or drain lines, replacing a shower pan with a new drain, or any electrical change does, and the City of Hialeah requires the work to be inspected. We’ll tell you in writing which parts of your job need a permit and pull it before the work starts. Call (888) 836-5914 to talk through your specific scope.
What if I have another contractor’s estimate for the same work?
Bring it and we’ll review it line by line at no charge. Our Free Second Opinion exists because most bathroom estimates in Hialeah are missing the same two lines: substrate repair and waterproofing. Send us the quote or call (888) 836-5914, and we’ll show you what’s in it and what isn’t.
Related Work
Vanity and tile work rarely stands alone. If you’re planning a wider scope, start with Bathroom Remodeling in Hialeah and we’ll map the full project so the finish work lands in the right order. Homeowners comparing options across the metro also read about home remodeling and construction services for the trades that sit alongside this one, including the plumbing and electrical adjustments a new vanity and shower valve usually require.
The kitchen side of the house uses many of the same countertop and fixture brands, and we quote it with the same written-price discipline. If a bathroom is the first project and a kitchen follows, the scope and documentation process looks the same either way.
Call (888) 836-5914 for a free estimate on your vanity, tile and fixture work in Hialeah. Background-checked, uniformed technicians. A live person answers 24/7. A documented photo record on every visit, included as standard. And a flat written price before any work begins, so you can screenshot it and compare before you decide.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah.


