A Rowan company - serving Hialeah, FL
A remodeled primary bathroom with a soaking tub and a walk-in shower
James Hardie · Hialeah

James Hardie Bathroom Remodeling in Hialeah, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Hialeah
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
A new wood side gate with black hardware
A new concrete driveway with a paver border
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Bathroom Remodeling: The Hialeah Owner’s Guide

We install James Hardie bathroom systems across Hialeah, and a full gut remodel of a hall or primary bath typically runs $9,000-$28,000 depending on tile, waterproofing scope, and fixture grade. Small baths land around $5,000-$12,000. A failing cement board panel or backer seam doesn’t wait for a convenient week: most Hialeah owners find out when a shower wall tiles start to pop, a grout line darkens and won’t dry, or a soft spot shows up behind the vanity. By then, water has usually been working behind the board for months.

Call (888) 836-5914

This page is written for the owner who already has James Hardie product in the bathroom, or who’s trying to figure out whether the failing layer is the HardieBacker board, the tile assembly over it, or something underneath. We’re an independent remodeling contractor, not affiliated with James Hardie, and every price below is in dollars so you can screenshot it and compare.

Key Takeaways

  • James Hardie’s bathroom product is HardieBacker cement backer board: 1/4 in. for floors over plywood, 1/2 in. for walls and shower surrounds.
  • Most Hialeah bathroom failures we open up are waterproofing failures at seams and penetrations, not board failures.
  • Full bathrooms: $9,000-$28,000 installed. Small baths: $5,000-$12,000. A shower replacement with new backer: $3,000-$8,500.
  • We inspect before we quote, write the price before any work starts, and document with photos on every visit.

Which James Hardie Models This Applies To

A tile setter installing wall tile in a shower

HardieBacker is sold in a small, honest lineup: 1/4 in. thickness for floors and countertop substrates, 1/2 in. for walls and wet-area shower surrounds, in 3 ft. by 5 ft. sheets and some longer lengths. There’s no “series” or model number the way a fan or a garage opener has one, which confuses owners who go looking for a part label. The two markings that matter are stamped on the back of the sheet: the HardieBacker name and the thickness. If your tile is bonded to what looks like a gray, cementitious board and you see a grid pattern molded into its face, that’s the board’s mesh pattern, and it’s a reliable sign you’re looking at cement backer and not drywall or a gypsum-based board.

Compatibility gotcha: 1/4 in. HardieBacker has no structural value and is not a wall board substitution. Some Hialeah bathrooms built during the 2015-2021 condo boom came out with 1/4 in. behind wall tile where 1/2 in. belonged, and we find cracked grout and panel flex in those bathrooms more often than not. If you’re replacing a panel in an existing surround, match the thickness the substrate was built for, not the thickness that happens to be on the shelf at the warehouse.

The decision that actually costs money is the waterproofing layer. HardieBacker is a substrate, not the waterproofing itself. The board is water-resistant, so it won’t crumble the way greenboard does, but on its own it will still let water through at seams, corners, and valve penetrations. In a shower, the right question isn’t just “is it HardieBacker?” but “is there a continuous liquid or sheet membrane over it, with the seams taped and the walls floated properly.” We spec Hydro Ban or a comparable sheet membrane over HardieBacker on every shower we build, and we name it in the written scope so you can check the invoice against it.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Bathroom Remodeling Is Failing

A bathroom that’s failing at the substrate level doesn’t usually announce itself. It telegraphs, and the signals are specific:

  • Tiles popping off a shower wall, or bulging: The bond between tile and board has failed, almost always because water got behind the tile and broke the adhesive down. If a tile comes off and the board behind it is chalky, that’s the story.
  • Grout lines that stay dark and never dry out: Dark grout that doesn’t lighten after a day or two is a moisture signal, and on HardieBacker the usual culprit is an unsealed seam or a missed waterproofing point around the valve or niche.
  • Soft or flexing floors near the toilet or tub: 1/4 in. HardieBacker over an underframed subfloor flexes underfoot, and the tile above it cracks along grout lines. This is a framing and subfloor issue as much as a board issue.
  • Mold or efflorescence at floor-to-wall joints: White powdery deposits at the tile base are mineral salts wicking through, which means moisture is traveling where it shouldn’t. In Hialeah’s humidity, a slow leak in a shower pan or a blocked weep point shows up here first.
  • Crumbling or powdery board at valve or shower-head penetrations: The board edge around a cut for a shower valve erodes when a waterproofing collar was skipped. This is the most common single failure we open up, and it’s almost always a $30 part that wasn’t installed.

One more thing worth knowing about Hialeah specifically: our rainy season doesn’t cause the leak, but it makes it worse. Bathrooms here run at high humidity for months, so a slow leak that would dry out in a dry climate stays wet and keeps rotting. That’s why we pull moisture readings before quoting, not after the tile is off.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A finished backyard cottage with a small covered porch

Installed bathroom remodeling in Hialeah runs $9,000-$28,000 for a full bath, $5,000-$12,000 for a small bath, $3,000-$8,500 for a shower replacement, and $4,500-$12,000 for a walk-in shower. A tub-to-shower conversion sits at $3,500-$10,000, and vanity replacement alone is $800-$3,000 if the shower surround is sound and only the vanity needs swapping.

What moves the number inside those ranges: whether the tub comes out or stays, whether the tile comes off the walls or goes over an approved underlayment (we don’t recommend that over a failing board), whether the drain and valve move, and the tile choice itself. A straightforward replacement of a failed HardieBacker panel with new membrane, tile, and finished walls sits at the low end. A full gut – studs exposed, new waterproofing throughout – sits at the high end.

What’s included every time:

  • A written flat price and written scope before anyone starts. No “call for a quote” – the number is on paper first.
  • The waterproofing product named in the scope (membrane brand, seam treatment, thickness of board).
  • A written warranty on the work, covered under the 365-Day Done Right Promise.
  • A photo record of what we found when we opened up the wall and what was installed, delivered to you.
  • No change order proceeds until you sign it – that’s the whole point of the pricing discipline, and it’s why our jobs finish within a few percent of the agreed number.

DIY or Call Us?

Some of this an owner can inspect safely. A moisture meter from a hardware store ($30-$50) held against the tile at the base of a shower wall will tell you whether there’s moisture behind it. You can pull the shower valve trim cover and look at the board edge without touching plumbing. You can press on the floor near the toilet and listen for flex.

Where DIY goes wrong: cutting out and replacing a backer panel means removing tile, re-floating the board, taping and waterproofing the seams, and retiling. If the waterproofing layer is compromised anywhere – a missed corner, a pinched membrane, an unsealed valve collar – the failure returns in six to eighteen months, and by then the damage has spread. On a bathroom floor, that can mean a subfloor repair on top of the board repair. We’ve reopened a Hialeah hall bath where a homeowner had done a careful tile job over a 1/4 in. board laid dry, no seam tape, and the whole thing had cracked along every grout line inside a year.

We’d rather inspect and tell you it’s a $200 repair than quote a $9,000 remodel you don’t need. Call (888) 836-5914 for a free estimate, and if you have a competing written quote, we’ll review it line by line at no charge before you decide.

FAQs

A new roof with clean valleys and new flashing

How long does a James Hardie bathroom install last in Hialeah? A properly installed HardieBacker shower with a continuous waterproofing membrane over it should last 20-30 years before the assembly needs attention; the board itself isn’t usually the limiting factor, the tile and grout are. The weak point is the waterproofing at seams and penetrations, which is exactly why we name the membrane in the written scope. When we open a bathroom and the board is 1/4 in., or the seams weren’t taped, we replace the assembly, not just the failed tile. Call (888) 836-5914 for an exact quote – estimates are free.

Can a failing HardieBacker panel be repaired instead of replaced? Sometimes yes, if a single panel failed at a shower valve and the rest of the surround is dry and intact – a targeted panel replacement with re-waterproofed seams runs at the low end of the $3,000-$8,500 shower replacement range. When the failure has spread to multiple panels, or the floor was laid on 1/4 in. over an underframed subfloor, replacement is the only correct answer. We inspect first, photograph what we find, and tell you which it is. Call (888) 836-5914 to schedule that inspection – it’s free, and the written price follows.

How long does the job take? A single-panel shower repair with tile and waterproofing typically takes 3-5 working days, including the cure time for the membrane and thinset. A full bath remodel in Hialeah runs 2-4 weeks depending on whether the plumbing moves and how long the tile takes to set and cure. We give the duration in writing with the price, and we don’t start the clock until you’ve signed off on the scope. Call (888) 836-5914 for the schedule and the number.

How do you source the right HardieBacker and membrane for our bathroom? We spec by thickness and use, not by model number: 1/2 in. for walls and shower surrounds, 1/4 in. for floors only over an underframed and approved subfloor, with a named waterproofing membrane over the whole wet area. If your existing bathroom already has HardieBacker in the floor and you want a replacement match, we measure the existing panel and the subfloor assembly so the replacement fits what was built. We also handle the surrounding trades with the same written scope: KraftMaid and Wellborn cabinets for the vanity, Cambria, Silestone, or Caesarstone for the counter where it needs to match. Call (888) 836-5914 – we’ll inspect, quote, and document the whole scope in writing.

If you’re in Hialeah and your bathroom has a failing shower wall, a dark grout line that won’t dry, or a soft spot near the tub, call us at (888) 836-5914 for a free estimate. We’ll inspect the assembly, show you the moisture readings and photos, and hand you a flat written price with the waterproofing product named in the scope – before any work starts.

Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new white vinyl privacy fence with a double gateNew painted shaker cabinets with an organized deep drawerA remodeled kitchen with a waterfall island and wood cabinetsA new multi-panel patio door opening a kitchen to the patioA new stained cedar privacy fenceA new paver patio with a seat wall and fire pit

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Hialeah

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Hialeah team

A local vetted partner works across Hialeah and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 836-5914
Local Service Coverage

Request a Free Estimate in Hialeah

Tell us what you need - Rowan Construction Group Hialeah responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch