







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Home Additions & ADU: The Hialeah Owner’s Guide
A Dvele home addition or ADU in Hialeah typically runs $45,000 to $130,000 installed, depending on square footage, finish level, and whether you’re adding an attached room or a full detached unit. That’s the number our Hialeah crews quote, in writing, before a single tool comes off the rack. On ADU construction specifically, expect $90,000 to $220,000, and a garage conversion into a livable unit lands between $30,000 and $80,000. We’re an independent provider and not affiliated with Dvele, but we work around their panelized systems regularly.
The work usually starts the same way in Hialeah: a homeowner notices a crack in the drywall where a module seam was taped, or a door that’s started dragging on a frame that was dead-plumb two summers ago. Water is almost always the cause under Florida sun and rain, and once a seam or flashing detail gives way, the damage compounds faster than most people expect.
Which Dvele Models This Applies To

Dvele builds its additions and ADUs on a panelized platform, and the label inside the electrical panel door or the stamped mark on the structural frame tells you which series and module configuration you have. Grab that information before anyone quotes you a price, because the wall thickness, stud spacing, and attachment details change between a detached ADU and an attached addition built on the same platform. The model number is on the panel label. Mock it up with a photo, and the number is easy to read even after paint.
On the OEM-vs-aftermarket question, Dvele-specific structural pieces and their proprietary connection hardware usually need to match the original module. Standard rough-in materials, sheathing, and finish goods don’t need to come from Dvele, and we source those through our fifty-plus vetted brands. For interior finishes, that includes KraftMaid and Wellborn cabinets, Cambria and Silestone countertops, and standard materials through our trade partners. Hialeah’s humidity is the wildcard. A detail that works in a dry climate can fail within two seasons here if the flashing isn’t lapped the way it needs to be.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Home Additions & ADU Is Failing
- Hairline cracks following a horizontal line along a module seam. The joint is losing its tape or the substrate beneath it has shifted. Left alone, this opens into an entry point for wind-driven rain off Hialeah’s afternoon storms.
- A floor that slopes or feels soft near an exterior wall. Usually a sign of moisture infiltrating under the sheathing, often after a roof penetration or a window flange that wasn’t sealed properly at install.
- Doors or windows that stick more in summer than winter. Wood frames and engineered lumber move with humidity, and if the swing is getting worse every year, the frame is absorbing water it shouldn’t be.
- Pest damage along the bottom plate near grade. In Hialeah, termites and moisture go together, and a poorly detailed flashing or siding gap at the base is their favorite entry.
- Musty smell in a room that was dry five years ago. That’s the smell of a moisture migration problem, not a seasonal quirk, and it needs a moisture test before you spend a dime on new finishes.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

The structural repair or addition work, like Dvele-specific rebuilding, sits in the $45,000 to $130,000 range for a full addition. For a targeted fix to a failing seam or water-damaged frame, expect a smaller scope but the same rules: a written line-item scope, a flat price before work starts, and no change order signed without you reading it first. Every visit includes a documented photo record, so you can see what was found and what was done when the crew leaves.
The 365-Day Done Right Promise covers the workmanship, not just the parts. If something we installed fails within a year, we come back and make it right. That’s backed by The Haven Standard and formal terms, not an asterisk on a brochure.
DIY or Call Us?
You can safely check the inside of the electrical panel for the Dvele label, photograph the frame stamp, measure the room dimensions, and look for visible water staining or cracks. That’s it. Where a failing Dvele addition goes wrong is in the structural seams, roof penetrations, and any low-voltage wiring running through the panels. Cutting into a load-bearing seam without knowing which panel carries what load, or opening a wall that has wiring inside it, is a real hazard and one we don’t recommend for a homeowner.
Hialeah’s building department requires permitted work on structural repairs, which isn’t a box you can tick off with a YouTube video. Call (888) 836-5914 and we’ll schedule a free estimate, with a written quote before any material is ordered.
FAQs

Dvele panelized systems, when installed and flashed correctly, should last decades. In Hialeah, the failure clock usually starts ticking at the flashing and roof penetration details, not the panels themselves, so the realistic repair interval is closer to 10 to 15 years for exterior weatherproofing. Interior joints and tape lines can fail much sooner if moisture gets behind the sheathing. Call (888) 836-5914 for a free assessment before the damage spreads.
Yes, and often it should be. A surface seam failure or a single water-damaged window frame can be repaired without touching the structural core, which saves your budget without risking a full rebuild. The only way to know which path you’re on is a moisture and structural assessment.
A targeted repair, like re-flashing a penetration or resetting a window, can take one to three days. A full addition or module replacement takes weeks, not days, because permits, inspection, and material lead time all factor into the schedule. We give you the realistic window in writing, not a promise to be done by Friday.
We order Dvele-specific structural components directly from the manufacturer or their approved supplier using the model and panel ID from your home’s label. Standard rough-in and finish materials come through our vetted brand network. We never claim to have parts on hand, and we don’t stock Dvele components on our trucks, because the right part for your model is the only one worth installing.
If you’ve got a failing seam, a sticking door, or a musty room in your Dvele addition, call (888) 836-5914 for your free estimate. We’ll bring the photo record, put the price in writing, and quote a flat number before anyone touches your home.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












