







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Home Additions & ADU: The Hialeah Owner’s Guide
We build and finish Oldcastle-compatible home additions and ADU (accessory dwelling unit) projects across Hialeah, and typical installed pricing runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. There’s no “same-day” version of this work – an addition involves permits, inspections, and a foundation – so plan on weeks, not hours, and expect a written price before a single tool comes out. In Hialeah, most owners don’t discover a problem with an Oldcastle component all at once. It shows up as a hairline crack in a block wall that widens over a wet season, a door that stops latching square after the slab settles, or a roofline over the addition that starts weeping at the tie-in to the main house. By the time you’re reading a parts page, the symptom has usually been there for months.
Which Oldcastle Models This Applies To
Oldcastle covers a lot of ground – masonry block, hardscape, and structural wall systems – and the “part” that fails on an addition or ADU is usually a specific system component, not the whole assembly. The most common failure points we open up in Hialeah are the CMU block and mortar joint at an exterior wall, the footing-to-slab transition, and the tie-in flashing where new construction meets the original structure. Before you order anything, measure. Block nominal dimensions run in standard modular sizes (an 8x8x16 block measures roughly 7⅝ x 7⅝ x 15⅝ actual, because the mortar joint is built into the nominal name). Match the actual face dimension to your wall, not the number on the box. If your plans or permit packet name a specific Oldcastle series, that series designation matters more than the generic description, because block strength class and moisture absorption differ between product lines, and Hialeah’s saturated summer ground punishes the wrong absorption rating. OEM block from the same series matches the wall’s color and texture after repointing. A quality aftermarket block can absolutely meet the engineering spec, but it will read differently against the original wall years later. We confirm the series and the engineered spec before we order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Home Additions & ADU Is Failing
These are the symptoms we document most often on Hialeah additions and ADUs. Each one points to an underlying cause you can’t see from the surface.
- Stepped cracks running along mortar joints. Cracks that “stair-step” up a block wall usually mean footing movement or differential settlement, not just surface weathering. Hialeah’s high water table and sandy fill make this common on additions built over older fill.
- Efflorescence – the chalky white bloom – that keeps returning. Salt deposits push out of the block when moisture is moving through it. Recurring bloom means water is entering somewhere above and the wall can’t dry, often a flashing or weep detail at the roofline.
- Doors and windows that stop latching square. When a newly added wall settles, the opening frame racks out of square. A door that was perfect at punch-list and sticks a year later is a structural clue, not a hardware problem.
- Staining or dampness at the tie-in to the original house. The joint between the addition and the main structure is the most common leak path we find. Failing flashing or a missing vapor barrier shows up as a damp band on interior drywall near the seam.
- Hairline cracks in a poured slab or footing edge. Small cracks in a footing or slab edge can mean the mix or curing was off spec. In Hialeah’s climate, a slab that cured too fast in the heat will crack early and keep moving.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what these projects actually run in the Hialeah market, installed, with the number in writing first:
| Scope | Installed price range |
|---|---|
| Home Addition (full scope) | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion to living space | $30,000 – $80,000 |
What drives the range: foundation and footing conditions under Hialeah’s soil, the engineering spec on the block and structural system, permit and inspection costs for the specific scope, and how cleanly the addition ties into the existing roofline and walls. The price is a flat number with a written scope – parts and labor itemized, not “call for a quote.” Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. Every visit includes a documented photo record of what we found and what we did, and the work carries the 365-Day Done Right Promise: if it isn’t done right, we make it right.
DIY or Call Us?
An owner can safely measure the existing block and mortar joints, photograph the cracks with a tape measure alongside for scale, and check the permit records on the original addition. That information is genuinely useful and we welcome it. What an owner should not do is repoint a load-bearing block wall, patch a footing, or chase down a settlement crack by filling it and calling it fixed – covering a structural crack hides the evidence an engineer needs and can let water keep working behind the new mortar. On a home addition or ADU in Hialeah, the structural system is load-bearing, and a wall that’s moving under load is not a weekend patch job. We’re an independent service provider, not affiliated with Oldcastle, and we’ll tell you plainly what we found. Call (888) 836-5914 for a free estimate – and if you have a competitor’s written quote, bring it. We’ll review it line by line at no charge.
FAQs

A properly built and waterproofed addition or ADU should hold its structure for decades, but Hialeah’s rain and humidity wear the tie-in flashing, weep details, and exterior sealant years before the block itself fails – plan on inspecting and refreshing those water-management details periodically. The block is the durable part; the water details are what need watching. Call (888) 836-5914 for an exact assessment – estimates are free.
Often, yes – a settling wall, a failed tie-in flashing, or a cracked footing edge can sometimes be stabilized and repaired rather than rebuilt from scratch, depending on how far the movement has gone. A structural engineer’s read plus an on-site inspection tells you which path makes financial sense. We’ll put that finding in writing. Call (888) 836-5914 to schedule a free estimate.
An addition typically runs weeks to a few months from permit to final inspection, and an ADU runs longer because it carries its own utility, foundation, and inspection sequence – this is planned construction, not emergency work. The timeline in your written scope is the one to hold us to. Call (888) 836-5914 for a written timeline with your free estimate.
We confirm the Oldcastle series and engineered spec named in your plans or permit packet first, then source the matching block, flashing, and structural components to that spec through our vetted material network – OEM or a quality aftermarket equivalent that meets the same engineering requirement. We don’t claim to stock parts or carry them on a truck; we order to your documented spec. Call (888) 836-5914 and we’ll walk you through what your project needs. We also work with KraftMaid, Cambria, and Silestone on the finishes side of these builds.
For a home addition or ADU in Hialeah, the first step is a written price with a written scope – that’s the standing offer here, backed by a free second opinion on any estimate you already have. Call (888) 836-5914 to schedule your free estimate.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












