







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Hialeah Owner’s Guide
Tremron doesn’t make bathroom fixtures. The brand is a Florida-based manufacturer of pavers, retaining walls, and hardscape products, poured at plants in Jacksonville, Fort Myers, and Miami Lakes, and sold through dealers across the state. So a “Tremron bathroom remodel” in Hialeah usually means one of two things: a paver-stone shower floor, patio, or accent wall built from Tremron product (most often the Tremron Stonewall or Tremron Olde Towne series), or a bathroom remodel in a home or commercial building where Tremron pavers are already on site and the client wants them integrated. A full bathroom remodel in Hialeah typically runs $9,000 – $28,000 installed, depending on scope, tile, fixture tier, and whether the shower pan is being rebuilt. We install Tremron-compatible stone work as part of bathroom projects throughout Hialeah, and we’ll tell you upfront: as an independent contractor, we are not affiliated with Tremron. What we do is install their product correctly, so it holds up in Miami-Dade humidity and doesn’t fail in two seasons.
Owners usually discover a problem the same way. A few tiles on the shower floor start popping loose. Grout lines on the paver-stone wall turn dark and stay dark. Water wicks up the base of the stone and stains drywall on the other side. Or the pavers under a shower pan shift because the installer skipped a proper waterproofing membrane. It’s rarely a dramatic failure. It’s a slow, ugly one, and by the time it’s visible, the substrate is already wet.
Key Takeaways
- Tremron is a hardscape brand, not a bathroom-fixture brand; bathroom applications use their pavers, Stonewall blocks, or Olde Towne series.
- A full Hialeah bathroom remodel with Tremron stone runs $9,000 – $28,000 installed; smaller refreshes $5,000 – $12,000.
- Most Tremron-in-bathroom failures trace to missing waterproofing, not to the stone.
- Miami-Dade humidity stresses improperly sealed stone faster than most of Florida; sealing and slope matter more than the brand.
- We quote a flat written price before any work starts, and the number doesn’t move unless a change order is signed.
Which Tremron Models This Applies To

Tremron’s residential product lines that show up in bathroom and adjacent wet-area work fall into a handful of families. The ones we see most often in Hialeah bathrooms are Tremron Olde Towne (a tumbled-edge paver used for shower floors, curbless wet-room transitions, and floor medallions), Tremron Stonewall (a split-face concrete wall block used for accent walls and pony walls), and Tremron Plaza or Tremron Capri (smooth modular pavers used for floor tile in larger bathrooms or vanities-adjacent stonework). Each series comes in standard thicknesses – typically 2 3/8 inch for pavers and 60mm for many Stonewall units – and the size tolerance on concrete pavers is wider than ceramic or porcelain tile. That tolerance is what trips up installers who treat Tremron pavers like porcelain. Grout joints have to be sized for the actual variance in the run, not for the box’s printed spec.
To identify the right Tremron part, measure. Measure length, width, and thickness in millimeters with a caliper or a tape that reads in both inches and metric, then check the underside of the paver or the back of the block for the stamped Tremron mark and series name. Tremron paver faces vary between tumbled, split-face, and smooth, and the finish has to match across the repair, or the new piece stands out under the bathroom’s lighting. If you’re replacing a single shattered paver or a cracked Stonewall block, bring the broken piece to a Tremron dealer and match against the physical sample, not the website photo. Colorbatches change; screens don’t.
OEM versus aftermarket comes down to three questions: is the exact series and color still in production, is the thickness tolerance compatible with what’s already installed, and will the finished look read as continuous. Tremron’s Florida plants still produce most of their current catalog, but discontinued colors and older batch colors are gone. A good aftermarket paver that matches the dimensions but not the color will look wrong in a bathroom where the light is close and the surfaces are small. Where the color is unavailable, a properly bonded and sealed transition strip in a contrasting stone is the honest fix, not a fake-match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Bathroom Remodeling Is Failing
Most of what fails in a Tremron bathroom installation is not the stone. It’s what’s under the stone. Here’s what we actually see when we open these up in Hialeah:
- Hollow-sounding pavers or Stonewall blocks. Tap the surface with the handle of a screwdriver. A dull thud means the thinset or mortar bed has lost bond, usually because the substrate wasn’t flat or wasn’t dry when the stone went down. In Hialeah’s humidity, moisture trapped behind a paver rarely dries out on its own.
- Efflorescence on the stone face. That white, chalky bloom on the surface is salt being pushed out from behind the stone as water moves through it. It usually means water is getting behind the stone and has nowhere to drain. Sealing the face is not the fix – the water needs a path out.
- Dark grout lines that stay dark after cleaning. Grout darkens and stays dark when moisture is wicking up from a failed shower pan or an improperly flashed wall. Cement-based grout on Tremron pavers is porous, and in Miami-Dade’s year-round humidity, it stays damp longer than most homeowners expect.
- Lipped or uneven paver edges. If a paver edge sits proud of the paver next to it by more than about a sixteenth of an inch, the base has moved. Common causes: no uncoupling membrane over a wood subfloor, insufficient mortar coverage, or expansion joints omitted at the perimeter.
- Staining or rust on the stone near fixtures or drain. A rust-colored stain at the base of a shower wall or vanity usually means a fastener or metal edge trim is corroding inside a wet assembly. It’s an indicator that water has been where it shouldn’t be for a while.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the ranges we quote in Hialeah, in writing, before anyone touches a tool. Every number below is a flat price with a written scope; there’s no “call for a quote,” and there’s no open-ended hourly.
| Scope | Installed $ Range (Hialeah) |
|---|---|
| Full bathroom remodel (Tremron stone integrated) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation (with paver floor) | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement (pan and tile) | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: linear feet of Tremron stone wall or floor work, whether the existing pan and waterproofing are being rebuilt or reused, tile selections, fixture tier, and demolition access. Two Hialeah bathrooms with identical square footage can price $6,000 apart if one needs new subfloor and waterproofing and the other doesn’t. That difference gets identified during a site visit, not guessed at over the phone.
What’s included every time: removal of the failed material, substrate inspection with a documented photo record, waterproofing to current code, installation of the matched Tremron product and any transition stone, sealing, and a written workmanship warranty. A written price before any work starts is the whole point of how we operate; no change proceeds without a signed change order. That’s why our projects land within a few percent of the number the customer agreed to.
DIY or Call Us?
There are a few things an owner can safely do. You can tap-test the stone (screwdriver handle, listen for hollow thuds), look behind the shower valve escutcheon with a flashlight for staining or soft drywall, and photograph any cracks or staining on the stone or grout. That’s useful information to have before you contact anyone.
Where DIY goes wrong: stone removal and re-bedding over a wet assembly is not a repair you can do piecemeal. Once a paver pulls loose, it’s almost always because the substrate underneath has failed; resetting the paver without fixing the water path resets the same failure on the same schedule. On top of that, waterproofing a shower or wet area to current code is a specific skillset – the wrong membrane, the wrong overlap, or a missed corner bead causes the second failure to happen faster than the first. If the failed stone sits inside a shower or any wet wall, this isn’t a DIY project. Call (888) 836-5914 and we’ll come out, document what’s behind the failure with photos, and give you a free second opinion on any written estimate you already have. Crews are background-checked and uniformed, and a live person answers our calls 24/7.
FAQs

How long does a Tremron paver bathroom floor last in Hialeah? Ten to fifteen years is a realistic expectation when the waterproofing, substrate, and sealing are all done correctly, and five to eight years when they aren’t. The stone itself will outlast the installation; what fails is the membrane, the thinset, and the grout. If you want this done right the first time with a documented install and a 365-Day Done Right Promise, call (888) 836-5914 for a free estimate.
Can a cracked Tremron paver or Stonewall block be repaired instead of replaced? Sometimes. A single hairline crack that doesn’t affect the bond can be filled with color-matched epoxy and monitored. But a cracked paver inside a shower or wet area is almost always a sign the base has moved, and repairing the face without fixing the base is a patch, not a fix. Bring us the broken piece and the story of when it cracked; that tells us whether to replace or rebuild.
How long does a Tremron bathroom stone swap take? A single paver or a shower floor replacement in a Hialeah bathroom usually runs 1 – 3 days of install time after materials are on site, plus curing time before sealing. A full bathroom remodel with new waterproofing and stone across the floor and shower walls is closer to two to four weeks, start to finish. The schedule is in the written scope, and it doesn’t move without a change order.
How do you source the matching Tremron part? We pull the physical sample (or a photo with measurements) to a Tremron dealer and match against actual stock, not the catalog image, because colorbatches shift between runs and photos don’t match in daylight and bath light. If the exact color is discontinued, we say so before we quote, and we propose a contrasting transition stone rather than a bad match.
We also work with KraftMaid and Cambria and Silestone on the fixture and countertop side of the same bathroom, so a full Hialeah bathroom remodel can hold one written quote and one schedule instead of three.
Call Rowan Construction Group Hialeah at (888) 836-5914 to schedule your free estimate. We’ll bring the sample book, measure the space, and hand you a written price with a written scope before we leave. The price stays where we wrote it.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












