







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Hialeah Owner’s Guide
We install and repair Unilock-compatible windows and doors for Hialeah homeowners, and most full swaps land between $4,500 and $15,000 for standard replacement, or $8,000 to $25,000 for impact-rated units. A single failed component, like a balance, lock, or seal, is usually a smaller job, but the part has to match your exact Unilock series before anyone can price it honestly. Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Unilock.
Owners in Hialeah usually spot the failure in the wet months. A door drags on the threshold after a week of rain. A window that used to glide now needs a shoulder. Or you notice a fine line of moisture between the panes after a storm. South Florida humidity and salt air accelerate these failures, so a worn seal or hinge doesn’t sit static the way it might in a drier climate.
Which Unilock Models This Applies To

Unilock spreads its windows and doors across several product lines, and the parts don’t interchange freely. A balance from one series won’t seat in another, and a multi-point lock assembly on an impact door is a completely different animal from the latch on a standard sliding glass unit. The fastest way to identify your model is the manufacturer label, which sits in the window channel at the head or jamb of each sash, and on the hinge edge of a door slab. That label carries a series code and a date of manufacture, and it’s the difference between ordering the right part the first time and guessing twice.
If the label is gone, we measure instead: glass size, frame depth, and the position of the balance or hinge. For Unilock specifically, the OEM-versus-aftermarket decision matters more than on generic brands. OEM parts guarantee fit, but on older Hialeah stock some OEM lines are discontinued or back-ordered for weeks. A quality aftermarket balance or lock from a vetted supplier often fits the same, works the same, and arrives faster. We tell you which is which, with the number attached, so you decide with facts rather than pressure. We also service KraftMaid, Cambria, and Silestone installations, so if a window or door change touches cabinetry or stone in a remodel, the trades talk to each other.
Two things worth knowing before you order. First, Unilock’s impact-rated door hardware uses different screw spacing than its standard hardware, so a lock set that “looks right” on a standard door won’t line up on an impact door. Second, Florida product approval (FPA) matters: replacement impact units in Hialeah need a product approval number that matches the opening, and we confirm it before installing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
- The sash won’t stay up. That’s a broken or stretched balance spring, the tension part that carries the window’s weight. When one balance fails, the sash drifts down on one side, and forcing it wears the other balance too.
- Water beads between the panes. The sealant that holds the insulating glass unit’s two panes has failed, letting moisture in. Once the desiccant is saturated, the fog won’t clear and the glass has to be replaced, not just cleaned.
- The door drags on the threshold. Usually a worn hinge or a shifted slab after humidity swelling. Left alone, it grinds the frame and wears the weatherstripping, which then lets rain in.
- The lock or handle won’t engage cleanly. On Unilock multi-point doors, a worn striker or a misaligned gear can leave the door looking shut but never properly sealed. That’s a security and water-intrusion issue, not just an inconvenience.
- You feel heat or hear the street. Failed weatherstripping and perimeter seals let both in. In a Hialeah summer that’s a measurable jump in your cooling bill and the first sign the envelope has opened up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Hialeah, standard window replacement runs $4,500 to $15,000 depending on count, size, and frame material. Impact window installation runs $8,000 to $25,000, and that range reflects the impact-glass and FPA-approved hardware required here. A single failed balance or lock is far less, but pricing depends entirely on the exact part and model, which is why we inspect before we quote.
Every quote is a flat written price before any work starts, with the parts, labor, and warranty listed line by line. What drives the range: number of openings, whether you’re replacing the whole unit or just the glass or hardware, impact versus standard rating, and whether the frame is sound or needs reframing. If a job turns out bigger than the original scope, we don’t proceed on the change until a written change order is signed. The work carries our 365-Day Done Right Promise, and every visit includes a documented photo record of what we found and what we installed. Call (888) 836-5914 for a free estimate.
DIY or Call Us?
There’s a safe split. You can check the manufacturer label, measure the opening, tighten a loose handle screw, and clean tracks and weep holes. That’s the extent of what we’d recommend without tools and a partner. Swapping a balance, replacing an insulating glass unit, or re-aligning an impact door’s multi-point lock is where DIY goes wrong: impact glass and door hardware are heavy, mis-set parts void the product approval, and a bad install is how an impact window fails exactly when you need it. Windows and doors are the safety envelope of the house, and a mistake there is expensive to unwind.
If the part is small and you’re confident, our teams can advise on the phone. For anything that changes the seal, the lock, or the glass, have us look. Call (888) 836-5914 and we’ll tell you plainly what’s involved.
FAQs

Expect 15 to 25 years for well-maintained units, but in Hialeah the humidity and salt air shorten the clock on seals, hinges, and weatherstripping. The glass and frame usually outlast the moving parts, which is why hardware fails first. Call (888) 836-5914 for a condition check before yours does.
Often yes. Balances, locks, hinges, and weatherstripping are repairable or replaceable on their own, while a failed insulating glass seal means the glass unit itself has to be swapped. We quote the repair first and only recommend replacement when the frame or glass is compromised. Call (888) 836-5914 to get an exact quote, free.
A single balance or lock is usually done in one visit. A full glass unit or door slab takes a scheduled appointment, and a whole-home window replacement runs across multiple days depending on count. We give you the schedule in writing before work starts. Call (888) 836-5914 to book.
We identify your model from the manufacturer label or by measuring, then confirm the series code before ordering. If an OEM part is discontinued or back-ordered, we offer a vetted aftermarket equivalent that fits and show you both prices. Call (888) 836-5914 and we’ll confirm availability for your model.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












