







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The Hialeah Owner’s Guide
We install Unilock-compatible bathroom remodeling in Hialeah, and a full bathroom remodel typically runs $9,000 – $28,000 installed, with small bathrooms at $5,000 – $12,000. Unilock is a wall-system and surface brand, so the “part” that fails is usually a panel, a trim profile, or a waterproofing component behind the finish – not the room itself. Owners in Hialeah usually find out when a seam opens at a shower wall, a panel edge lifts near the tub deck, or grout line discoloration starts spreading from a corner that never quite dried out. That’s the moment the phone call happens, and it’s usually the right moment.
Which Unilock Models This Applies To
Unilock bathroom systems follow series and profile lines rather than one universal part number, so matching matters more than most homeowners expect. The reliable way to identify what you have is to pull the original spec sheet from the panel back or the installation paperwork, then measure the panel thickness and trim profile width with a tape – Unilock panels commonly sit in a narrow thickness band, and a trim profile cut for one series will not seat cleanly on another. If the paperwork is gone, a photo of the panel edge and the corner profile is usually enough for us to identify the series. On the OEM-versus-aftermarket question: for waterproofing membranes and seam sealants, we specify OEM or a documented equivalent because the warranty chain depends on it. For visible trim and decorative profiles, a quality aftermarket match is often indistinguishable and costs less. We’ll tell you which is which in writing before you commit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Remodeling Is Failing
- Seam separation at inside corners. The sealant or profile joint has given up, usually because the substrate moved slightly or the original bead was applied over a damp surface. A gap at an inside corner lets shower spray into the wall cavity.
- Panel edge lifting near the tub or shower pan. Water wicks behind the panel when the bottom seal fails, and the panel face begins to swell or curl at the cut edge. This is the failure we see most often in Hialeah bathrooms with heavy daily shower use.
- Discoloration spreading from a grout line or seam. Darkening that returns after cleaning points to moisture trapped behind the finish, not surface mold. It typically means the waterproofing layer beneath has been compromised.
- Soft or hollow-sounding wall when pressed. Tap along the wall with a knuckle; a change in sound from solid to hollow usually means the substrate behind the panel has absorbed water. In Hialeah’s humidity, that substrate does not dry out on its own.
- Loose trim profiles or a shifting niche surround. Adhesive failure at trim edges lets the profile rock, and once it moves, the seal behind it opens. Small movement becomes a leak path within a season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Hialeah, a targeted repair to a failed seam or trim profile usually lands well under a full remodel. A bathroom remodel runs $9,000 – $28,000; a small bathroom remodel runs $5,000 – $12,000; a walk-in shower installation runs $4,500 – $12,000; a tub-to-shower conversion runs $3,500 – $10,000; and a shower replacement runs $3,000 – $8,500. A vanity installation, if the failure reached the vanity wall, runs $800 – $3,000.
What drives the number: whether the waterproofing layer is intact, how much finish has to come out to reach it, and whether the substrate needs replacement. Our quote separates parts from labor in writing, so you can see the Unilock-compatible panel or profile cost on its own line. The work carries a written workmanship warranty, and under Clause 1 of the Haven Standard, the flat price is written before anyone picks up a tool.
DIY or Call Us?
You can safely check a few things yourself: photograph the failed seam, press the wall to test for softness, confirm the panel series from the back of a loose trim piece, and note whether the discoloration returns after cleaning. What goes wrong with DIY here is the waterproofing. Re-sealing a joint over a wet substrate traps moisture rather than stopping it, and a cosmetic fix on a compromised membrane buys you a season at best before the damage reaches framing. This isn’t a high-tension or electrical job, so there’s no injury risk in looking – but there is real cost risk in guessing. Call (888) 836-5914 and we’ll tell you what we’d check first, at no charge.
FAQs

A properly installed Unilock-compatible wall system typically lasts 15 – 25 years, but Hialeah’s humidity and near-daily shower use shorten the sealant and seam life to roughly 5 – 8 years before re-sealing is due. The panels outlast the joints, which is why seam maintenance matters more than panel replacement here. Call (888) 836-5914 for an exact quote – estimates are free.
Often, yes – a failed seam, a lifted trim profile, or a single compromised panel can usually be repaired without touching the rest of the room, and that’s the first thing we assess. Repair is not appropriate when the substrate behind the panel has gone soft, because the new finish has nothing sound to bond to. We’ll tell you which situation you’re in, in writing, before any work starts.
A seam or trim repair is typically a single-day visit; a full panel or shower replacement usually takes 2 – 4 days depending on how much substrate needs to come out. We schedule around your household, and every visit includes a documented photo record of what we found and what we did. Call (888) 836-5914 for a free estimate and a written scope.
We identify your Unilock series from the spec sheet or a photo of the panel edge, then source the matching panel, profile, or membrane through our vetted supplier network – we don’t claim to stock parts or carry them on a truck. Where an OEM component is required for warranty, we specify OEM; where a documented equivalent works, we’ll quote both so you can choose. Rowan Construction Group Hialeah is an independent service provider and is not affiliated with Unilock. We also work with KraftMaid, Cambria, and Silestone on the cabinet and countertop side of a bathroom remodel.
If a Unilock panel, seam, or profile in your Hialeah bathroom has started to fail, the fastest path to a real number is a phone call. We’ll review the condition, quote a flat written price with parts and labor on separate lines, and hand you a free second opinion on any estimate you already have. Call (888) 836-5914 to schedule your free estimate.
Written by the team at Rowan Construction Group Hialeah, serving Hialeah and nearby areas.












